Code Monkey home page Code Monkey logo

qidi-up2date-english's Introduction

Qidi Up2date

This repository is about updating the Qidi Series 3 to the latest software including some useful and optional tools as well as the conversion of the original display to a new display running on the Klipperscreen. Currently the guides are compatible with the Qidi X-Max 3 and the X-Plus 3.

For the complete conversion of the printer, you should follow this guide. It describes how to update the printer's old software to the latest version.

With this macro, the Raspberry Pi used for the display swap can be safely shut down from Mainsail.

If you want to create an automated backup of all configs, macros etc. on your own Github repository, you will find a solution here.

3D models of the print head and the assemblies of the XY axes are available here

If you like my work, you are welcome to support me

ko-fi

qidi-up2date-english's People

Contributors

leadustin avatar

Stargazers

avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar

Watchers

avatar avatar avatar

Forkers

fisheye3d

qidi-up2date-english's Issues

Original State

Hello.

Can we have the steps to return machine to original state please?

Klipperscreen-shutdown error

Ive followed your guide for klipperscreen shutdown but get the following error,
/home/mks/printer_data/config/klipperscreen_shutdown.sh: line 24: sshpass: command not found

Fixed by installing sshpass sudo apt-get install sshpass

ls /dev/serial/by-id/*

ls /dev/serial/by-id/*

Shows nothing?? All else went to plan.

Cannot access, no such file or directory?

Front panel

Can you provide how to get to the screen to replace it, I can only get to the bottom 2 screws. Does the front panel come off?

Is Klipperscreen over USB possible without a Pi?

As per the title.

The guide recommends to use a Raspberry Pi to drive a touchscreen, but would it be possible to forego a Raspberry Pi, and use a USB-C cable attached to one of the spare USB-C ports on the Qidi mainboard itself to drive a touchscreen via Klipperscreen installed on the Qidi mainboard instead?

3D models for X-Plus 3

First of all, thanks for all your great work.

the 3d models are correct for the x-max 3, however the models for the x-plus 3 should be different.

The printhead on the x-plus 3 is shorter, the space between the two rods is less compared to the x-max 3. In addition, the pins that locks the two pieces are different.

The covers has a different lock system.

As the space between the two rods of the x-axes are different, and the belt width is 6mm instead of 9mm, I think also the other pieces that connects the axes/rods are wrong. At least the pieces for the x-axes.

Some Info about the Integrated TFT

I did some digging.

The Integrated Display is a TJC Touch Display. Its not a QIDI Homebrew that runs its own MCU.
Which means we can actually use it on stock klipper by just flashing another firmware.

There are some out there.

Trying to decompile the TFT File gives me the Info the Firmware was made with the tjc-1.65.5 editor, which can be found here:
http://filedown.tjc1688.com/USARTHMI/USARTHMIsetup_latest.zip

I will dig into some of these Files available and try to build one for the X3-Plus and use this Issue here to keep you up2date.

Recommend Projects

  • React photo React

    A declarative, efficient, and flexible JavaScript library for building user interfaces.

  • Vue.js photo Vue.js

    🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.

  • Typescript photo Typescript

    TypeScript is a superset of JavaScript that compiles to clean JavaScript output.

  • TensorFlow photo TensorFlow

    An Open Source Machine Learning Framework for Everyone

  • Django photo Django

    The Web framework for perfectionists with deadlines.

  • D3 photo D3

    Bring data to life with SVG, Canvas and HTML. 📊📈🎉

Recommend Topics

  • javascript

    JavaScript (JS) is a lightweight interpreted programming language with first-class functions.

  • web

    Some thing interesting about web. New door for the world.

  • server

    A server is a program made to process requests and deliver data to clients.

  • Machine learning

    Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.

  • Game

    Some thing interesting about game, make everyone happy.

Recommend Org

  • Facebook photo Facebook

    We are working to build community through open source technology. NB: members must have two-factor auth.

  • Microsoft photo Microsoft

    Open source projects and samples from Microsoft.

  • Google photo Google

    Google ❤️ Open Source for everyone.

  • D3 photo D3

    Data-Driven Documents codes.