Create grub2 bootloader to load synoboot in un-usb disk, HDD or SSD
Warning, still have issue, but work with usbboot then reboot withou usboot, guess the kernel have hardcode to read rd.gz file
Must run in linux with grub-pc installed
copy the synoboot.img into the synoboot-grub2-unusb-disk
replace the /dev/sda with your DSM disk
$ git clone https://github.com/laris/synoboot-grub2-unusb-disk
$ cd synoboot-grub2-unusb-disk
$ ./create-md0-boot-dir.sh
scp -r ./boot user@DSM-IP:/tmp/
ssh to DSM and sudo su - to change to root and
root# mv /tmp/boot /
root# dd if=/boot/grub/i386-pc/boot.img of=/dev/sda bs=446 count=1
root# dd if=/boot/grub/i386-pc/core.img of=/dev/sda bs=512 seek=1
-
Environment, Intel Atom D2550 MB with 2 x 3.5" HDDs for RAID0, 2G RAM, 2xGbE NICs, successfully to install DSM6.2 using junboot 1.03b
-
Partition table list
root@DSM2550:~# fdisk -l /dev/sda (sdb have same partition table) Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0x00077232 Device Boot Start End Sectors Size Id Type /dev/sda1 2048 4982527 4980480 2.4G fd Linux raid autodetect /dev/sda2 4982528 9176831 4194304 2G fd Linux raid autodetect /dev/sda3 9437184 1953320351 1943883168 926.9G fd Linux raid autodetect -
DEBUG console, i attached one TTY serial converter on ttyS1 to monitor boot log
-
create host, Debian9/PVE5.2
-
Precedure
-
1, mount synoboot_Junboot_v1.03b_ds3617_6.2.img file and copy junboot file into new directory ${HOST temp dir}/boot for DSM
-
2, create /boot/grub/i386-pc and copy host /usr/lib/grub/i386-pc/* into it.
-
3, copy grub.cfg grubenv into /boot/grub
root@pvedsm1 ➜ boot ls bzImage extra.lzma info.txt rd.gz zImage bzImage extra.lzma info.txt rd.gz zImage root@pvedsm1 ➜ boot ls grub grub.cfg grubenv i386-pc -
4, create core.img, I add mdraid09_be so the grub can load the DSM raid1 /dev/md0 in /boot
grub-mkimage -v -C xz -O i386-pc -o ./boot/grub/i386-pc/core.img -p "(hd0,msdos1)/boot/grub" -d ./boot/grub/i386-pc biosdisk part_msdos mdraid09_be ext2 -
5, cp the ${HOST temp dir}/boot into DSM /boot
-
6, dd the boot.img and core.img into MBR and 2nd sector of /dev/sda
root@DSM2550:/boot# dd if=grub/i386-pc/boot.img of=/dev/sda bs=446 count=1 1+0 records in 1+0 records out 446 bytes (446 B) copied, 0.000316455 s, 1.4 MB/s root@DSM2550:/boot# dd if=grub/i386-pc/core.img of=/dev/sda bs=512 seek=1 60+1 records in 60+1 records out 30906 bytes (31 kB) copied, 0.0116049 s, 2.7 MB/s -
7, then reboot and remove usb disk, the bootloader can work but then got "mount failed" error and vga screen stuck in info.txt
GNU GRUB version 2.02-pve6
+----------------------------------------------------------------------------+
|*DS3617xs 6.2 Baremetal with Jun's Mod v1.03b |
| DS3617xs 6.2 Baremetal with Jun's Mod v1.03b Reinstall |
| DS3617xs 6.2 VMWare/ESXI with Jun's Mod v1.03b |
| |
| |
| |
| |
| |
| |
| |
| |
| |
+----------------------------------------------------------------------------+
Use the ^ and v keys to select which entry is highlighted.
Press enter to boot the selected OS, `e' to edit the commands
before booting or `c' for a command-line.
mount failed
I also searched the xpenology forum but rare discussion about mount failed error, especially it will show in PVE/proxmox environment when DSM as VM, but work when loader as sata disk. https://xpenology.com/forum/topic/12952-dsm-62-loader/?page=5&tab=comments#comment-93988
what's mean of the mount failed? the ramdisk mount rootfs? or lacking of kernel module to mount rootfs/ramdisk?
Also try to build virtio-net kernel module but got panic after load extra.lzma, so if provide the .config file, that will be excellent to compile the kernel bzImage to debug.
--------------------------------------------------------------------------------------------------
Post init
Updating /tmpRoot//usr/lib/modules/update/virtio_net.ko...
==================== start udevd ====================
===== trigger device plug event =====
[ 46.315103] general protection fault: 0000 [#1] SMP
[ 46.316008] Modules linked in: broadwell_synobios(PO) aufs(F) 9p(F) fscache(F) 9pnet_virtio(F) 9pnet(F) virtio_mmio(F) virtio_pci(F) virtio_net(F) virtio_scsi(F) virtio_blk(F) virtio_ring(F) virtio(F) button(F) ax88179_178a(F) usbnet tg3(F) r8169(F) cnic(F) bnx2(F) vmxnet3(F) pcnet32(F) e1000(F) sfc(F) netxen_nic(F) qlge(F) qlcnic(F) qla3xxx(F) pch_gbe(F) ptp_pch(F) sky2(F) skge(F) jme(F) ipg(F) uio(F) alx(F) atl1c(F) atl1e(F) atl1(F) libphy(F) mii(F) exfat(O) btrfs synoacl_vfs(PO) zlib_deflate hfsplus md4 hmac bnx2x(O) libcrc32c mdio mlx5_core(O) mlx4_en(O) mlx4_core(O) mlx_compat(O) compat(O) qede(O) qed(O) atlantic(O) r8168(OF) tn40xx(O) i40e(O) ixgbe(O) be2net(O) igb(O) i2c_algo_bit e1000e(O) dca vxlan fuse vfat fat glue_helper lrw gf128mul ablk_helper arc4 cryptd ecryptfs sha256_generic sha1_generic ecb aes_x86_64 authenc des_generic ansi_cprng cts md5 cbc cpufreq_conservative cpufreq_powersave cpufreq_performance cpufreq_ondemand mperf processor thermal_sys cpufreq_stats freq_table dm_snapshot crc_itu_t crc_ccitt quota_v2 quota_tree psnap p8022 llc sit tunnel4 ip_tunnel ipv6 zram(C) sg etxhci_hcd mpt3sas(O) mpt2sas(O) megaraid_sas(F) mptctl(F) mptsas(F) mptspi(F) mptscsih(F) mptbase(F) scsi_transport_spi(F) megaraid(F) megaraid_mbox(F) megaraid_mm(F) vmw_pvscsi(F) BusLogic(F) usb_storage xhci_hcd uhci_hcd ohci_hcd(F) ehci_pci(F) ehci_hcd(F) usbcore usb_common mv14xx(O) p(OF) [last unloaded: broadwell_synobios]
[ 46.328738] CPU: 0 PID: 7844 Comm: cat Tainted: PF C O 3.10.105 #23739
[ 46.328738] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014
[ 46.328738] task: ffff880070588040 ti: ffff880070c70000 task.ti: ffff880070c70000
[ 46.328738] RIP: 0010:[<ffffffff813fd761>] [<ffffffff813fd761>] __ethtool_get_link_ksettings+0x61/0x110
[ 46.328738] RSP: 0018:ffff880070c73e08 EFLAGS: 00010202
[ 46.328738] RAX: ffffffffa0dd67c0 RBX: ffff880070c73e58 RCX: 0000000000000000
[ 46.328738] RDX: ffffffffa0dd67c0 RSI: ffff880070c73e58 RDI: ffff88007bad8000
[ 46.328738] RBP: ffff88007bad8000 R08: ffffea00018a24d8 R09: 000000000006c49f
[ 46.328738] R10: 00000000000006e3 R11: 0000000000000246 R12: ffff8800709cc000
[ 46.328738] R13: 0000000000020000 R14: ffff880037783a58 R15: ffff88007bad83f8
[ 46.328738] FS: 00007f1ad7419700(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000
[ 46.328738] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 46.328738] CR2: 0000000000404950 CR3: 0000000070955000 CR4: 00000000000006f0
[ 46.328738] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 46.328738] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 46.328738] Stack:
[ 46.328738] ffff88007b85cc00 00000000000000a8 ffffffff810d3f3e ffff880000000000
[ 46.328738] 0000000000000014 0000000000000000 ffff88007bad83e8 ffffffffffffffea
[ 46.328738] ffff8800709cc000 ffffffff8140f37f 0000000000000000 0000000000000000
[ 46.328738] Call Trace:
[ 46.328738] [<ffffffff810d3f3e>] ? handle_mm_fault+0x13e/0x2a0
[ 46.328738] [<ffffffff8140f37f>] ? show_speed+0x4f/0x80
[ 46.328738] [<ffffffff812ff327>] ? dev_attr_show+0x17/0x50
[ 46.328738] [<ffffffff81166dc9>] ? sysfs_read_file+0x99/0x170
[ 46.328738] [<ffffffff810f6b49>] ? vfs_read+0x99/0x160
[ 46.328738] [<ffffffff810f81c9>] ? SyS_read+0x59/0xb0
[ 46.328738] [<ffffffff814bcc32>] ? system_call_fastpath+0x16/0x1b
[ 46.328738] Code: c7 03 00 00 00 00 48 c7 43 40 00 00 00 00 48 89 de 48 83 e7 f8 48 29 f9 83 c1 48 c1 e9 03 f3 48 ab 48 89 ef 48 8b 85 98 01 00 00 <ff> 90 70 01 00 00 89 c5 48 83 c4 30 89 e8 5b 5d 41 5c c3 0f 1f
[ 46.328738] RIP [<ffffffff813fd761>] __ethtool_get_link_ksettings+0x61/0x110
[ 46.328738] RSP <ffff880070c73e08>
[ 46.378135] ---[ end trace 95c4ea70a0ec5680 ]---
[ 48.676664] bio: create slab <bio-2> at 2
--------------------------------------------------------------------------------------------------
https://xpenology.com/forum/topic/7884-xpenology-runing-on-docker/?do=findComment&comment=95342
Also research about the DDSM in this post https://xpenology.com/forum/topic/13110-does-migrating-ddsm-to-linux-dockerlxc-make-sense/?do=findComment&comment=95486
REF: http://www.dolda2000.com/~fredrik/doc/grub2 https://pete.akeo.ie/2014/05/compiling-and-installing-grub2-for.html
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent