lamontj / anope Goto Github PK
View Code? Open in Web Editor NEWThis project forked from anope/anope
Anope IRC Services
Home Page: http://anope.org
This project forked from anope/anope
Anope IRC Services
Home Page: http://anope.org
Anope -- a set of IRC services for IRC networks ----------------------------------------------- Anope is 2003-2014 Anope Team <[email protected]>. Based on Epona 2000-2002 PegSoft <[email protected]>. Based on Services 1996-1999 Andrew Church <[email protected]>. This program is free but copyrighted software; see the file COPYING for details. Information about Anope may be found at http://www.anope.org/ Information about Epona may be found at http://www.epona.org/ Information about Services may be found at http://www.ircservices.esper.net/ Table of Contents ----------------- 1) Credits 2) Presentation 3) Installation 4) Command Line Options 5) Messages Translation 6) Contact and Mailing List 1) Credits Anope is based on Lara's Epona version 1.4.14. Epona is based on Andy Church's IRC Services version 4.3.3. The original credits: * Mauritz Antunes Portuguese translation * Jose R. Holzmann, Raul S. Villarreal Spanish translation * Andrew Kempe <[email protected]> News system * <[email protected]> Italian translation * <[email protected]> Turkish translation * Andrew Kempe <[email protected]> Session limiting Epona credits: * lara <[email protected]> Main coding * CafeiN <[email protected]> Turkish translation * Sylvain Cresto aka tost <[email protected]> FreeBSD 5 patch * Marcelo Conde Foscarini aka Bras <[email protected]> Portuguese translation * Alvaro Toledo aka POLLITO <[email protected]> Spanish translation * chemical <[email protected]> German translation * shine <[email protected]> German translation * Guven Guzelbey aka MeShGuL <[email protected]> Turkish translation * Jordi Pujol <[email protected]> Catalan translation * Eva Dachs <[email protected]> Catalan translation * Toni Perez <[email protected]> Catalan translation * Sergios Karalis <[email protected]> Greek translation * Thomas J. Stensas aka ShadowMaster <[email protected]> Ultimate 3.x support Anope credits: * Adam Kramer <[email protected]> * Adam <[email protected]> * Alvaro Toledo <[email protected]> * Amanda Folson <[email protected]> * Andrew Berquist <[email protected]> * Björn Stiddien <[email protected]> * Charles Kingsley <[email protected]> * Chris Hogben <[email protected]> * Daniel Engel <[email protected]> * David <[email protected]> * David Narayan <[email protected]> * David Robson <[email protected]> * Daniele Nicolucci <[email protected]> * Florian Schulze <[email protected]> * Gabriel Acevedo H. <[email protected]> * Jan Milants <[email protected]> * Jens Voss <[email protected]> * JH <[email protected]> * Joris Vink <[email protected]> * Lee Holmes <[email protected]> * Lucas Nussbaum <[email protected]> * Mark Summers <[email protected]> * Matthew Beeching <[email protected]> * Naram Qashat <[email protected]> * Phil Lavin <[email protected]> * Pieter Bootsma <[email protected]> * Robin Burchell <[email protected]> * Sean Roe <[email protected]> * Sebastian V <[email protected]> * Thomas Juberg Stensås <[email protected]> * Trystan .S Lee <[email protected]> * openglx <[email protected]> Anope Translations: * Robby <[email protected]> (nl_NL) * Kein <[email protected]> (ru_RU) * Maik Funke <[email protected]> (de_DE) * Isaac Fontal <[email protected]> (es_ES) * Janos Kapitany <[email protected]> (hu_HU) * Szymon S'wierkosz <[email protected]> (pl_PL) * Christopher N. <[email protected]> (fr_FR) * Yusuf Kurekci <[email protected]> (tr_TR) Anope Web panel: * Denis M. (Phr33d0m) <[email protected]> 2) Presentation Anope is a set of Services for IRC networks that allows users to manage their nicks and channels in a secure and efficient way, and administrators to manage their network with powerful tools. Currently available services are: * NickServ, a powerful nickname manager that users can use to protect themselves against nick stealing. Each user has its own nickname group, that allows the user to register as many nicks as needed while still being able to take profit of his privileges and to modify the nick configuration. NickServ also has an optional password retrieval feature. * ChanServ, a powerful channel manager that helps users to administer their channels in a totally customizable way. ChanServ has an internal list of privileged users and banned users that controls accesses on a per-channel basis. It eliminates all takeover problems, because of its powerful op/unban/invite and even mass deop and mass kick functions. * MemoServ, an helpful companion that allows sending short messages to offline users, that they can then read when they come online later. * BotServ, an original service that allows users to get a permanent, friendly bot on their channels in an easy way. Each bot can be configured to monitor the channels against floods, repetitions, caps writing, and swearing, and to take appropriate actions. It also can handle user-friendly commands (like !op, !deop, !voice, !devoice, !kick, and many others), say a short greet message when an user joins a channel, and even "take over" ChanServ actions such as auto-opping users, saying the entry notice, and so on. This service can be disabled if you want to save some bandwidth. * OperServ, the IRCops' and IRC admins' black box, that allows them to manage the list of network bans (also known as AKILL (DALnet) or GLINE (Undernet)), to configure messages displayed to users when they log on, to set modes and to kick users from any channel, to send notices quickly to the entire network, and much more! * HostServ, a neat service that allows users to show custom vHosts (virtual hosts) instead of their real IP address; this only works on daemons supporting ip cloaking, such as UnrealIRCd. Anope currently works with: * Bahamut 1.4.27 or later (including 1.8) * Charybdis 3.4 or later * Hybrid 8.1 or later * InspIRCd 1.2 or 2.0 * ngIRCd 19.2 or later * Plexus 3 or later * Ratbox 2.0.6 or later * UnrealIRCd 3.2 or later Anope could also work with some of the daemons derived by the ones listed above, but there's no support for them if they work or don't work. 3) Installation See the INSTALL file for instruction on installing Anope. 4) Command Line Options Normally, Anope can be run simply by invoking the "services" executable. Any of the following command-line options can be specified to change the behavior of Anope: --debug Enable debugging mode; more info sent to log (give option more times for more info) --readonly Enable read-only mode; no changes to databases allowed --nofork Do not fork after startup; log messages will be written to terminal --noexpire Expiration routines won't be run at all --version Display the version of Anope --nothird Do not load the non-core modules specified --protocoldebug Debug each incoming message after protocol parsing --support Used for support, same as --debug --nofork --nothird Upon starting, Anope will parse its command-line parameters then (assuming the --nofork option is not given) detach itself and run in the background. If Anope encounters a problem reading the database files or cannot connect to its uplink server, it will terminate immediately; otherwise, it will run until the connection is terminated (or a QUIT, SHUTDOWN, or RESTART command is sent; see OperServ's help). In the case of an error, an appropriate error message will be written to the log file. If Anope is run with the "--readonly" command-line option, it can serve as a "backup" to the full version of services. A "full" version of services (run without --readonly) will automatically reintroduce its pseudo-clients (NickServ, ChanServ, etc.), while a "backup" services will not, thus allowing full services to be brought up at any time without disrupting the network (and without having to take backup services down beforehand). The "--debug" option is useful if you find or suspect a problem in Anope. Giving it once on the command line will cause all traffic to and from services as well as some other debugging information to be recorded in the log file; if you send a bug report, PLEASE include an excerpt from the log file WITH DEBUGGING ACTIVE; we cannot emphasize enough how important this is to tracking down problems. (You can also enable debugging while Services is running using OperServ's SET DEBUG command.) If you repeat use --debug=<level>, the debugging level will be increased, which provides more detailed information but may also slow Anope down considerably and make the log file grow dramatically faster. In general, a debug level of 1 is sufficient for the coding team to be able to trace a problem, because all network traffic is included and we can usually reproduce the problem. 5) Messages Translations Please see LANGUAGE for this information 6) Contact For announcements and discussions about Anope, please visit our Portal and Forums at http://www.anope.org/ -- make sure you register yourself to get full benefits. If you read the documentation carefully, and didn't find the answer to your question, feel free to post on the website forums or join our irc channel (irc.anope.org #anope). Once you join our Support channel be as precise as possible when asking a question, because we have no extraordinary powers and can't guess things if they aren't provided. The more precise you are the sooner you'll be likely to get an answer. If you think you found a bug, add it to the bug tracking system (http://bugs.anope.org) and - again - be as precise as possible. Also say whether the bug happens always or under what circumstances, and anything that could be useful to track your bug down. If you wrote a patch, send it over. :)
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.