Output frequency on u3 about labjackpython HOT 1 CLOSED

This is not an issue or bug in LabJackPython. In the future, please direct any support inquiries to us (LabJack) via one of the contact methods described on our website such as email ([email protected]) or live chat:
https://labjack.com/contact

The timer clock base you are using is not valid, you must pass a clock base index instead of the clock speed. See our timer/counter documentation. The clock base options are described in Table 2.9-2. You would use index 5 for 12MHz with divisor:
https://labjack.com/support/datasheets/u3/hardware-description/timers-counters

Also note that you are doing a timer configuration command and timer update command twice, I would recommend removing your d.writeRegister calls.

Also note that 0 is not a valid timer value, only 1-256 are. [Edit: 0 is valid, but it just means 256 divisor]. To disable the feature you should disable the timer. You could use configIO:
d.configIO(NumberOfTimersEnabled=0)

from labjackpython.