Asking if someone uses picncv2 successfull and noticed random displacement of axis during programms.

Config is:
MAX_VELOCITY = 30
MAX_ACCELERATION = 40
STEPGEN_MAXACCEL = 45
SCALE = 640.0

running with G64 P0.05

wired happens sometime during programms, suddenly the X-Axis is ~20mm out of place, maybe someone had this issue also :)

running machinekit on odroid c1 with preempt

best regards

Im missing instructions to geht it working in the odroid, i the machinekit image You posted in odroid Forums (from march) but it seems to miss the drivers. Anyone bot an working image or do i have to Compiler linuxcnc myself?

Thanks in advance :)

sudo apt-key adv --keyserver hkp://keys.gnupg.net --recv-key 4955043
gpg: kerserver timed out
gpg: kerserver receive failed: keyserver error
or
gpgkeys:http fetch error 7:couldn't connect:suceess

while i jump to next line
sudo sh -c 'echo "deb http://0ptr.link/raspbian wheezy main' > /etc/apt/sources.list.d/rpi-machinekit.list"
'dquote>

i'm using bananian ... banana pi

Is the driver enable to be controlled by the PICnc automatically (ie. no steps in a while.. disable the driver) or should the enable outputs be controlled by machinekit?