RTLTCP possible error on Pi about ais-catcher-for-android HOT 4 CLOSED

Jasper, no problem, it is after all a "something is not right" message. Just wanted to be sure.
thanks
Roger

from ais-catcher-for-android.

Same for sample rate 1536

Use the device argument 'rtl_tcp=172.27.0.45:12345' in OsmoSDR (gr-osmosdr) source
to receive samples in GRC and control rtl_tcp parameters (frequency, gain, ...).
client accepted! 172.27.0.57 43360
Allocating 15 zero-copy buffers
set freq correction 0
set gain mode 1
set gain 240
set sample rate 1536000
set freq 162000000
ll+, now 1
ll+, now 2
ll+, now 3
ll+, now 4
ll+, now 5
ll-, now 0
ll+, now 1
ll+, now 2
ll+, now 3
ll+, now 4
ll+, now 5
ll+, now 6
ll+, now 7
ll+, now 8
ll+, now 9
ll+, now 10
ll+, now 11
ll+, now 12
ll+, now 13
ll+, now 14
ll+, now 15
ll-, now 0
ll+, now 1
ll+, now 2
ll+, now 3

from ais-catcher-for-android.

The messages on the RTL-TCP is when the data on the sender side is created faster than the data is pulled. You will get this, depending on your network, traffic and machine, for higher sample rates. That is why I keep the default to 240K.
So, is unfortunately as expected.

from ais-catcher-for-android.

Jasper,

closed as normal functionality, if problems occur.

Roger

from ais-catcher-for-android.