• The Overview
• Installing
• Features
• Test information
• Contact us

• Arduino library for E-Ink display(1.54, 2.3, 2.9) made by HelTec Automation(TM)
• Now this library allows three sizes of e-ink to run on the "AVR" , "ESP32" , "ESP8266" development board.
• Display size definition in "imagedata.h".

To install this library:

• Download a zipfile from github using the "Download ZIP" button and install it using the IDE ("Sketch" -> "Include Library" -> "Add .ZIP Library..."
• Clone this git repository into your sketchbook/libraries folder.

For more info, see https://www.arduino.cc/en/Guide/Libraries

• Arduino library for E-Ink display(1.54, 2.3, 2.9).
• Consumes power only during refresh, power consumption as low as 24-30mW.
• Support for partial refresh, only takes 0.3s.
• Can continue to display for more than half a year in the power-off state.

• e-ink1.54
• e-ink2.13
• e-ink2.90

• http://www.heltec.cn/
• support mail

Before reporting an issue, make sure you've searched for similar one that was already created. Also make sure to go through all the issues labelled as for reference.