You can download and install Go for your operating system from the official site.

Please make sure you intall Go version 1.17. The Gradescope autograder uses Go version 1.17 too.

For those students who wish to write their Go code on AFS (either in a cluster or remotely), follow the guidance to download Go for linux here. However, instead of extracting the archive into /usr/local as mentioned in the installation instructions, extract the archive into a custom location in your home folder with following commands:

$ tar -C $HOME/(custom_directory) -xzf go1.17.linux-amd64.tar.gz

Then, instead of adding /usr/local/go/bin to the PATH environment variable as mentioned in the installation instructions, replace /usr/local with the path in which you have extracted the archive in the step before:

$ export PATH=$HOME/(custom_directory)/go/bin:$PATH

You will also need to set the GOROOT environment variable to be the path which you have just extracted the archive (this is required because Go is installed in a custom location on AFS machines):

$ export GOROOT=$HOME/(custom_directory)/go

This repository contains the starter code that you will use as the basis of your key-value messaging system implementation. It also contains the tests that we will use to test your implementation, and an example 'server runner' binary that you might find useful for your own testing purposes.

If at any point you have any trouble with building, installing, or testing your code, the article titled How to Write Go Code (with GOPATH) is a great resource for understanding how Go workspaces are built and organized. You might also find the documentation for the go command to be helpful. As always, feel free to post your questions on Piazza as well.

To test your submission, we will execute the following command from inside the src/github.com/cmu440/p0partA directory:

$ go test

We will also check your code for race conditions using Go's race detector by executing the following command:

$ go test -race

To execute a single unit test, you can use the -test.run flag and specify a regular expression identifying the name of the test to run. For example,

$ go test -race -test.run TestBasic1

To fix the missing module errors in Go 1.17, you can generate a module file as following:

In directory src/github.com/cmu440, execute the following command:

$ go mod init github.com/cmu440

This will auto-generate a go.mod file in the directory. As long as you include that file in the repo, the project will work fine. (e.g. go test inside src/github.com/cmu440/p0partA or src/github.com/cmu440/p0partB)

To make testing your server a bit easier (especially during the early stages of your implementation when your server is largely incomplete), we have given you a simple srunner (server runner) program that you can use to create and start an instance of your KeyValueServer. The program simply creates an instance of your server, starts it on a default port, and blocks forever, running your server in the background.

To compile and build the srunner program into a binary that you can run, execute the three commands below (these directions assume you have cloned this repo to $HOME/p0):

$ export GOPATH=$HOME/p0
$ go install github.com/cmu440/srunner
$ $GOPATH/bin/srunner

The srunner program won't be of much use to you without any clients. It might be a good exercise to implement your own crunner (client runner) program that you can use to connect with and send messages to your server. We have provided you with an unimplemented crunner program that you may use for this purpose if you wish. Whether or not you decide to implement a crunner program will not affect your grade for this project.

You could also test your server using Netcat as you saw shortly in lecture (i.e. run the srunner binary in the background, execute nc localhost 9999, type the message you wish to send, and then click enter).

Once you have written your test, simply run

$ go test

in p0partB to confirm that the test passes on the correct implementation.

Submit a zip file created by running make handin from src/github.com/cmu440. Do not change the names of the files (server_impl.go and squarer_test.go) as this will cause the tests to fail.