The latest version of the OpenWrt firmware is automatically compiled every Monday, which can be downloaded in Action. Will be updated to latest in every Monday Releases. For detailed information about each firmware, please refer to the README.md file of each model. Some important update instructions can be found in ChangeLog documents. The currently supported router models are:
- Select
Build OpenWrt for ${router}on the Action page. - Click the
Run workflowbutton.
There are currently two DIY scripts in the root directory of the warehouse: diy-part1.sh, diy-part2.sh and .config, which are executed before and after the update and installation of ./scripts/feeds update && ./scripts/feeds install. You can write the instructions for modifying the source code into the script, such as modifying the default IP , Host name, theme, add/remove software package..., etc. If the additional software package has the same name as the existing software package in the OpenWrt source code, the software package with the same name in the OpenWrt source code needs to be deleted, otherwise the packages in OpenWrt will be compiled first. It will automatically traverse all files in the package directory when compiling.
Just put the feeds.conf.default file into the root directory of the warehouse, it will overwrite the relevant files in the OpenWrt source directory. Create a new files directory under the root directory of the warehouse, and put the customized related files in the same directory structure as OpenWrt, and the OpenWrt configuration will be overwritten during compilation.
On the Action page. Select Build OpenWrt for ${router} in the list on the left, and Click the Run workflow button on the right. Set SSH connection to Actions: true to use tmate to connect to the GitHub Actions virtual server environment. You can directly perform the make menuconfig operation to generate the compilation configuration, or any customized operation. After triggering the workflow, wait for the SSH connection to Actions step to be executed on the Actions page, and then the following three lines of messages will be displayed: 1.To connect to this session copy-n-paste the following into a terminal or browser:, 2.ssh [email protected], 3.https://tmate.io/t/Y26QenMRd. Then copy the SSH connection command and paste it into the terminal for execution, or copy the link to open it in the browser and use the web terminal. enter the command: cd openwrt && make menuconfig for personalized configuration (The web terminal may encounter a black screen, just press Ctrl+C). After completion, press the shortcut key Ctrl+D or execute the exit command to exit, and the subsequent compilation work will proceed automatically.
| Folder/file name | Features |
|---|---|
| .config | Firmware related configuration, such as firmware kernel, file type, software package, luci-app, luci-theme, etc. |
| files | Create a files directory under the root directory of the warehouse and put the relevant files in. You can use custom files such as network/dhcp/wireless by default when compiling. |
| feeds.conf.default | Just put the feeds.conf.default file into the root directory of the warehouse, it will overwrite the relevant files in the OpenWrt source directory. |
| diy-part1.sh | Execute before updating and installing feeds, you can write instructions for modifying the source code into the script, such as adding/modifying/deleting feeds.conf.default. |
| diy-part2.sh | After updating and installing feeds, you can write the instructions for modifying the source code into the script, such as modifying the default IP, host name, theme, adding/removing software packages, etc. |
| Environment variable | Features |
|---|---|
| REPO_URL | Source code warehouse address |
| REPO_BRANCH | Source branch |
| FEEDS_CONF | Custom feeds.conf.default file name |
| CONFIG_FILE | Custom .config file name |
| DIY_P1_SH | Custom diy-part1.sh file name |
| DIY_P2_SH | Custom diy-part2.sh file name |
| UPLOAD_BIN_DIR | Upload the bin directory (all ipk files and firmware). Default false |
| UPLOAD_FIRMWARE | Upload firmware catalog. Default true |
| UPLOAD_RELEASE | Upload firmware to release. Default true |
| UPLOAD_COWTRANSFER | Upload the firmware to CowTransfer.com. Default false |
| UPLOAD_WERANSFER | Upload the firmware to WeTransfer.com. Default failure |
| RECENT_LASTEST | maximum retention days for release, artifacts and logs in GitHub Release and Actions. |
| TZ | Time zone setting |
| GITHUB_REPOSITORY | Github.com Environment variables. The owner and repository name. For example, ophub/op. |
| secrets.GITHUB_TOKEN | 1. Personal center: Settings → Developer settings → Personal access tokens → Generate new token ( Name: GITHUB_TOKEN, Select: public_repo, Copy GITHUB_TOKEN's Value ). 2. Op code center: Settings → Secrets → New secret ( Name: RELEASES_TOKEN, Value: Paste GITHUB_TOKEN's Value ). |
| Name | Value |
|---|---|
| Default IP | 192.168.1.1 |
| Default username | root |
| Default password | password |
| Default WIFI name | OpenWrt |
| Default WIFI password | none |
op
├── .github
│ └── workflows
│ ├── build-openwrt-linksys_wrt1900acs.yml # Build Linksys WRT1900ACS firmware
│ ├── build-openwrt-linksys_wrt3200acm.yml # Build Linksys WRT3200ACM firmware
│ ├── build-openwrt-linksys_wrt32x.yml # Build Linksys WRT32X firmware
│ ├── build-openwrt-x64.yml # Build X64 Virtual Machine firmware
│ ├── build-openwrt-phicomm_n1.yml # Build PHICOMM N1 firmware
│ ├── build-openwrt-nanopi_r2s.yml # Build NanoPi R2S firmware
│ ├── build-openwrt-s905x3.yml # Build S905x3 firmware
│ └── delete-older-releases-artifacts.yml # Delete older releases & artifacts
│
├── router # Related router Openwrt firmware codes
│ ├── linksys_wrt1900acs # Linksys WRT1900ACS related code files
│ │ ├── .config # config luci-app, luci-theme and other
│ │ ├── diy-part1.sh # DIY script part 1(Before Update feeds)
│ │ ├── diy-part2.sh # DIY script part 2(After Update feeds)
│ │ └── README.md # Instructions
│ │
│ ├── linksys_wrt3200acm # Linksys WRT3200ACM related code files
│ │ ├── .config
│ │ ├── diy-part1.sh
│ │ ├── diy-part2.sh
│ │ └── README.md
│ │
│ ├── linksys_wrt32x # Linksys WRT32X related code files
│ │ ├── .config
│ │ ├── diy-part1.sh
│ │ ├── diy-part2.sh
│ │ └── README.md
│ │
│ ├── nanopi_r2s # NanoPi R2S related code files
│ │ ├── .config
│ │ ├── diy-part1.sh
│ │ ├── diy-part2.sh
│ │ └── README.md
│ │
│ ├── x64 # x64 related code files
│ │ ├── .config
│ │ ├── diy-part1.sh
│ │ ├── diy-part2.sh
│ │ └── README.md
│ │
│ ├── s905x3 # s905x3 related (X96 Max Plus, HK1 Box)
│ │ ├── make # Build script for 905x3
│ │ ├── README.md
│ │ └── flippy
│ │ ├── phicomm_n1_firmware.img # Phicomm N1 firmware (*.img)
│ │ └── or phicomm_n1_firmware.zip # Phicomm N1 firmware (*.zip)
│ │
│ └── phicomm_n1 # PHICOMM N1 related code files
│ ├── .config
│ ├── diy-part1.sh
│ ├── diy-part2.sh
│ ├── make # Build script for PHICOMM N1
│ ├── README.md
│ ├── armbian # armbian related files
│ │ ├── boot-common.tar.gz # Public startup file
│ │ ├── firmware.tar.gz # armbian firmware
│ │ ├── dtb-amlogic # Armbian*Aml-s9xxx*.img's *.dtb library
│ │ │ └── *.dtb # *.dtb files
│ │ │
│ │ └── phicomm-n1
│ │ ├── kernel # Custom kernel folder
│ │ │ └── ${kernel} # Various versions of the kernel folder
│ │ │ ├── kernel.tar.gz
│ │ │ └── modules.tar.gz
│ │ └── root # Add your custom files(ROOTFS Partition)
│ │
│ ├── build_kernel # Build kernel for Phicomm-N1 & S905x3-Boxs
│ │ ├── make_use_img.sh # Kernel build script use *.img file
│ │ ├── make_use_kernel.sh # Kernel build script use kernel files
│ │ ├── update_dtb.sh # Update kernel.tar.xz to latest dtb files
│ │ ├── README.md
│ │ └── flippy
│ │ ├── Armbian*Aml-s9xxx*.img # Use Flippy's Armbian*.img files
│ │ ├── OR: N1_Openwrt*.img # Use Flippy's N1_Openwrt.img files
│ │ ├── OR: S905x3_Openwrt*.img # Use Flippy's S905x3_Openwrt*.img files
│ │ │
│ │ ├── boot-*.tar.gz # Use Flippy's boot*,dtb*,modules* files
│ │ ├── dtb-amlogic-*.tar.gz
│ │ └── modules-*.tar.gz
│ │
│ └── install-program # Install openwrt firmware to emmc
│ ├── Makefile
│ └── files
│ ├── fstab # Disk mount information
│ ├── n1-install.sh # Install to emmc for PHICOMM-N1
│ ├── n1-update.sh # update firmware for PHICOMM-N1
│ ├── u-boot-2015-phicomm-n1.bin # Recovery PHICOMM-N1 emmc partition
│ ├── s905x3-install.sh # Install to emmc for s905x3-box
│ ├── s905x3-update.sh # update firmware for s905x3-box
│ └── hk1box-bootloader.img # Recovery s905x3-box emmc partition
│
├── LICENSE # LICENSE for OP
└── README.md # Instructions for OP
OP © OPHUB
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent