Rider mate
- Burn raspbian lite image on SSD
- add empty
ssh
file at SD root - add
wpa_supplicant.conf
file with:
country=US
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1
network={
ssid="WIFI_SSID"
scan_ssid=1
psk="WIFI_PASSWORD"
key_mgmt=WPA-PSK
}
- connect via
ssh [email protected]
sudo raspi-config
- into
Interfacing Options
enable the camera (Yes then finish) - test the camera with
vcgencmd get_camera
(output must besupported=1 detected=1
) sudo apt-get update
sudo apt-get upgrade