joelsernamoreno / badusb_sd_wifi Goto Github PK

I followed the tutorial. Everything works great. Now if I want to change the password/SSID how can I do that?
I know that i could change :
const char *ssid = "BadUSB_Test";
const char *password = "badUSBWifi";
const char *ftp_username = "esp8266";
const char *ftp_password = "esp8266";
but then I need to reflash it. Can't you make something like spacehuhn did with wifi ducky so you can change wifi settings from a browser window?

Can you add a rubber ducky scripting language converter to the graphic interface (similar to duckuino.js)?

Good day sir. I am a graphic designer and i am interested in designing a logo for your good project. I will be doing it as a gift for free. I just need your permission first before I begin my design. Hoping for your positive feedback. Thanks

Greetings,

I did some wrong manipulations on my DM-3212.
When i plug the badusb, my os (Debian) doesn't recognize it through lsusb command.
No information in the kernel neither (dmesg command)

But when i press the reset button and quickly type lsusb, the system recognize it.
in the kernel i see the following :

usb 1-2: new full-speed USB device number 102 using xhci_hcd  
usb 1-2: New USB device found, idVendor=2341, idProduct=0036, bcdDevice= 0.01                                        
usb 1-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0  
usb 1-2: Product: Arduino Leonardo  
usb 1-2: Manufacturer: Arduino LLC  
cdc_acm 1-2:1.0: ttyACM0: USB ACM device  
usb 1-2: USB disconnect, device number 102  

sometimes (but not always) followed with

xhci_hcd 0000:00:14.0: WARN Cannot submit Set TR Deq Ptr  
xhci_hcd 0000:00:14.0: A Set TR Deq Ptr command is pending.  
xhci_hcd 0000:00:14.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.

Arduido IDE detect for a short moment the port.
The device quickly go off and I doesn't have the time to do anything.
(Device seems to be powered on for approximately 8sec with the red LED blinking)

I Suspect that i pushed some code in the wrong memory place, maybe I destroyed the firmware or the bios ?
Unfortunately i just started messing with this kind of hardware and my knowledge is limited in this area, i would greatly appreciate any advice.
any ideas ?

Best regards.

Greeting!

Environment

Firefox latest
Edge latest

what did i do

I already uploaded the HTML files, and /upload.html does exist.

screenshots

traffic

Thank youvery much and have a good day!

Hi to every one
I am using CJMCU-3212 Beetle Virtual Keyboard Bad usb ATMEGA32U4 WIFI ESP-8266 ESP8266 ESP-12E TF Micro SD Card Development Board Module but when i Upload sketch atmega32u4_code i forgot to short those pins and flash image and now its shown only red led and not even direct as USB to com and getting error ( USB device not recognized the last usb device you connected to this computer malfunctioned and windows does not recognize it is anyone can help or if possible can you asst me how to reset this board

Hi to every one
I am using CJMCU-3212 Beetle Virtual Keyboard Bad usb ATMEGA32U4 WIFI ESP-8266 ESP8266 ESP-12E TF Micro SD Card Development Board Module but when i Upload sketch atmega32u4_code i forgot to short those pins and flash image and now its shown only red led and not even direct as USB to com and getting error ( USB device not recognized the last usb device you connected to this computer malfunctioned and windows does not recognize it is anyone can help or if possible can you asst me how to reset this board

Hi joelsernamoreno, fist i gotta say that i love your work on the cjmu-3212, and i appreciate everything that you made possible for putting this codes out.
But i'm having problems to compile everything to a bin file due to the arduino libraries, that are mismatching from your archives somehow. Can you please send me the compiled .bin?

In the tutorial, you said to use a terminal. I'm on Windows 10.
Naturally, I use Filezilla.