joa-quim / mirone Goto Github PK

What steps will reproduce the problem?
1. FFT tool on any selected area/grid
2.
3.

What is the expected output? What do you see instead?
Save Data option not working on Radial Average Power Spectrum

What version of the product are you using? On what operating system?
Tested v1.4 and 1.5 both show same problem

Please provide any additional information below.
New option to select between Log10 and Natural Log (Ln) for plot/data
output. Tested on Windows XP SP3

When a coordinate conversion requires a conversions between datums the 
parameters keep in memory. On a second call that doesn't require datum 
changes, the old parameters will, wrongly, be applyied.

Matlab careless notion of compatibility between versions plus the Java 
shit invasion causes that in some versions the Mirone's menu bar shows up 
with hidden menu buttons (see attached image).

To remedy this the user will have to edit the mirone_uis.m file which 
resides on the program's root directory and modify the line (~785) that 
reads

    if (version7),  set(h1,'Pos',[pos(1:3) 1]);    end     % Adjust for > 
R13 bugginess

The key is to increase the second element of [pos(1:3) 1]  in such a way 
that the hidden menu buttons show up again.

Hi,
This is probably a simple problem. I'm not sure what you mean by 'move the 
offending ML dynamic libraries out of the way' 
Which libraries and where to? 

What steps will reproduce the problem?
1. type 'mirone' 
2. File > load gmt grid file
3. Select any gmt netcdf file

What is the expected output? What do you see instead?

I expect to load the gmt netcdf file. It pops back the error listed in the 
INSTALL.OSX file
??? Invalid MEX-file
'/Users/j/programs/MacMirone220/lib_mex/gdalread.mexmaci64':
dlopen(/Users/j/programs/MacMirone220/lib_mex/gdalread.mexmaci64, 1): Library
not loaded: /Users/j/programs/MacMirone220/libnetcdf.dylib
  Referenced from: /Users/j/programs/MacMirone220/libgdal.dylib
  Reason: Incompatible library version: libgdal.dylib requires version 9.0.0
  or later, but libnetcdf.dylib provides version 8.0.0.

What version of the product are you using? On what operating system?

macmirone220 
Yosemite 10.10.3

Please provide any additional information below.

What steps will reproduce the problem?

1.while trying to use grd project tool wih a grd opened. 

What is the expected output? What do you see instead?

the geographic computator window does not automatically find the # of 
lines in memory. nor it allows feeding manually.


What version of the product are you using? On what operating system?

latest SVN

Please provide any additional information below.

 see attached image

What steps will reproduce the problem?
1. opening a grd file popsup the attached error window

What is the expected output? What do you see instead?

hour the error window popsup, grd file is opened and is workable.

What version of the product are you using? On what operating system?

latest SVN

Aqua moto Currently Plot Specific Energy = d+Vel^2/2g, but not 
Total Energy = Stage + Vel^2/2g


Could you please add this capability to the code

Thank you

Regards Rudy

What steps will reproduce the problem?

1. when running the present SVN version, the folloing error occur at 
startup.
------------
??? Undefined command/function 'projection_menu'.

Error in ==> mirone_uis at 771
projection_menu(h1, home_dir)

Error in ==> mirone>mirone_OpeningFcn at 57
    [hObject,handles,home_dir] = mirone_uis(home_dir);

Error in ==> mirone at 27
        h = mirone_OpeningFcn(varargin{:});

Error in ==> startup at 29
mirone

Error in ==> matlabrc at 176
    startup
-------------------

What version of the product are you using? On what operating system?

present SVN snapshot of mirone
matlab is V7.0.019920(R14) /  May 2004

Please provide any additional information below.

customery folder definitions were taken care.

cheers
-rajaraman

What steps will reproduce the problem?
1. Open vitrinite tool
2. Open marker image
3. Get tie point

What is the expected output? What do you see instead?

I'll should select several tie points to calibrate my sample image. Instead of 
that I hear an error noise and is impossible to get a tie point.

What version of the product are you using? On what operating system?
Mirone 2.2.0, matlab 7.12.0.635(R2011a), Mac OS X Lion 10.7.

Please provide any additional information below.

What steps will reproduce the problem?
1. latest SVN loaded clean. failed to start.


What is the expected output? What do you see instead?

Instead of opening the menu bar, matlab reports the following error
-------------
??? Undefined command/function 'projection_menu'.

Error in ==> mirone_uis at 776
projection_menu(h1, hProj, home_dir);

Error in ==> mirone>mirone_OpeningFcn at 57
    [hObject,handles,home_dir] = mirone_uis(home_dir);

Error in ==> mirone at 27
        h = mirone_OpeningFcn(varargin{:});

Error in ==> startup at 29
mirone

Error in ==> matlabrc at 176
    startup
---------------------

What version of the product are you using? On what operating system?
latest SVN, clean install.
matlab 7.0.0.19920 (R14)

cheers
-rajaraman

What steps will reproduce the problem?
1. under aquamoto - timegrids menu:

selecting water files list throws up following error.
-----
» mirone
» ??? Operands to the || and && operators must be convertible to logical
scalar values.

Error in ==> aquamoto>push_namesList_Callback at 1936
        if (n_column == 1 && names{k}(1) == '#')    % If n_column > 1, this test
was already done above

Error in ==> aquamoto>aquamoto_uicallback at 3576
feval(callback_name,hObject,[],guidata(h1));

??? Error while evaluating uicontrol Callback.
-------------------------


latest SVN & matlab R14

Please provide any additional information below.

same thing works in V1.31

Dear Joaquim,
Right now the MISC functionality interpolates sww and MOST files to produce
time series data for given set of locations.

Is it possible to extend this MISC functionality to time grids list also?

I am trying to extract time series from the COMCOT output files.
cheers
-rajaraman

What steps will reproduce the problem?
1. Open A ANUGA FILE
2. EDIT THE NUMBER OF GRID LINES to HIGHER VALUES
3. select new slice to recreate Grid image at higher resolution

What is the expected output? What do you see instead?
Higher Resolution Grid of output. ERROR MESSAGE
Aquamoto: Mixe_images Index exceeds matrix dimensions.

What version of the product are you using? On what operating system?
Version: Ver 1.4.0 Windows XP

Please provide any additional information below.

Hi

I have downloaded the 5*5 degrees SRTM DEMs (attached .asc file) and I read
it in Mirone (1.2.3) and convert it to GMT .grd file(attached file .grd
file). when I want to read the file in GMT, it says "variable not found"
but the file is in the directory. I tried for several files, but it is the
same problem. none of the GMT commands(like grdinfo, ...) work with these
.grd files generated by Mirone!, please help me.  

Many thnaks 
Faramarz Nilforoushan

What steps will reproduce the problem?

1. trying to use swan compute for 3000 x 3000 grid


What is the expected output? What do you see instead?
 smooth running of swan

» ??? Out of memory. Type HELP MEMORY for your options.

Error in ==> tsu_funs>SwanCompute at 234
            feval(swan_hand,Z_bat, head_bat, Z_src, head_src, out.params,
out.maregraph_xy, opt_O, ...

Error in ==> tsu_funs at 5
            SwanCompute(varargin{:})

??? Error while evaluating uimenu Callback.


What version of the product are you using? On what operating system?

both SVN and V1.31 give same problem
Matlab 7.0.0.19920(R14)

Please provide any additional information below.

after loading both bathy and deform grids in memory, still the system
memory used is ~420MB.
increasing the grid max size does not help
physical memory is 2GB
virtual memory is 2GB
(matlab's suggestion of increasing virtual memory has no effect!)
tried monitoring the instant memory usage while starting swan, it does not
show any abnormal overshoot.

Is there any problem of handling big array like this? 

What steps will reproduce the problem?
1. I am trying to plot focal mechanisms using the instructions on this link " 
http://w3.ualg.pt/~jluis/mirone/howtos/Download___plot_CMT_catalog_focal_mechani
sms.html "
2. my input parameters in Global CMT toolbox are as follows: end date is 
1/1/2015, 4<Mw<10, lat 20-30, long 59-70. All other parameters are default.


What is the expected output? What do you see instead?
Expected output is the focal mechanism plot but mirone code is returning error. 
The details of error are as follows:

Error using  < 
Not enough input arguments.

Error in globalcmt>push_OK_CB (line 272)
        if (finfo.bytes < 100)                  % Delete the file anyway because it exists but is empty

Error in globalcmt>globalcmt_uiCB (line 574)
    feval([get(hObject,'Tag') '_CB'],hObject, guidata(hObject));

Error while evaluating uicontrol Callback



What version of the product are you using? On what operating system?


Please provide any additional information below.

It would be nice to have the ability to set a default Resolution for the
Aquamoto Viewer when opening SWW files.

I believe
Currently it is controlled by
inc = ( X + Y ) / (2*(n-1))

where X & Y are length of x and y sides (meters)
 and n = sqrt(number of triangles) ; 

it would be good to set either the resolution by SPACING
or By Line Numbers in the preferences

Regards Rudy



What steps will reproduce the problem?
1.
2.
3.

What is the expected output? What do you see instead?


What version of the product are you using? On what operating system?


Please provide any additional information below.

What steps will reproduce the problem?

1. swan setup to produce anuga sww output with mercator grid of 2km 
resolution. while setting parameters, mirone guesses a time step of 3.9s. 
Any attempt to change it to lower or higher whole number ends up in 
this "diverge" warning and time step is reset to the internally calculated 
value.
Interestingly it allows a value >= 8 for this case.

What is the expected output? What do you see instead?

Atleast I should be allowed to set a lower step size.

What version of the product are you using? On what operating system?

latest SVN

Please provide any additional information below.

 see attached screen shot

cheers
-rajaraman