The IObundle UART is a RISC-V-based Peripheral written in Verilog, which users can download for free, modify, simulate and implement in FPGA or ASIC. It is written in Verilog and includes a C software driver. The IObundle UART is a very compact IP that works at high clock rates if needed. It supports full-duplex operation and a configurable baud rate. The IObundle UART has a fixed configuration for the Start and Stop bits. More flexible licensable commercial versions are available upon request.

Install the latest stable version of the open-source Verilog simulator Icarus Verilog.

To simulate type:

make [sim]

To clean the simulation generated files:

make sim-clean

Install the FPGA design tools of your favority vendor. Create an FPGA build folder below folder hardware/simulation//; use the existing compiler and FPGA family folders as a reference.

Make sure the environmental variables for the tools and licenses you use are are defined. For example:

export ALTERAPATH=/path/to/intel/fpga/tools
export XILINXPATH=/path/to/xilinx/fpga/tools
export LM_LICENSE_FILE=port@host:lic_or_dat_file

To generate an FPGA neltlist for the UART core type:

make fpga-build [FPGA_FAMILY=<fpga family>]

where is the FPGA family's folder name

To generate all FPGA families for the UART core type:

make fpga-build-all [FPGA_FAMILY_LIST="<fpga family directory name list>"]

If you have the FPGA tools installed on another machine you can run FPGA compilation remotely by setting the following environment variables:

export VIVADO_SERVER=<full host name including domain or IP address>
export VIVADO_USER=<your user name at the host>
export QUARTUS_SERVER=<full host name including domain or IP address>
export QUARTUS_USER=<your user name at the host>

To clean the FPGA compilation generated files on the local or remote host type:

make fpga-clean

To generate the documentation for the IP core type:

make doc-build [DOC=<doc type name>]

Currently you can generate two document types: the Product Brief (DOC=pb) or the User Guide (DOC=ug). To create a new document type get inspired by the Makefiles in the document type directories document/pb and document/ug. Data from the FPGA compile tools is imported automatically into the docs.

To generate all documents for the IP core type:

make doc-build-all [DOC_LIST="<document directory name list>"]

To clean the documentation generated files type:

make doc-clean [DOC=<doc type name>]

To clean the documentation generated files for all document types, the command is

make doc-clean-all

To run a series of simulation tests on the simulator selected by the SIMULATOR variable, type:

make sim-test [SIMULATOR=<simulator directory>]

The above command produces a test log file called test.log in the simulator's directory. The test.log file is compared with the test.expected file, which resides in the same directory; if they differ, the test fails; otherwise, it passes.

To run the series of simulation tests on all the simulators listed in the SIMOLATOR_LIST variable, type:

make test-sim [SIMOLATOR_LIST="<simulator directory list>"]

where <simulator directory list> is the list of sub-directories in directory hardware/simulation, which correspond to simulator names.

To clean the files produced when testing all simulators, type:

make test-sim-clean

To compile and run a series of FPGA family tests on the FPGA family selected by the FPGA_FAMILY variable, type:

make fpga-test [FPGA_FAMILY=<fpga family directory name>]

The above command produces a test log file called test.log in the FPGA family's directory. The test.log file is compared with the test.expected file, which resides in the same directory; if they differ, the test fails; otherwise, it passes.

To run the series of FPGA family tests on all the FPGA families listed in the FPGA_FAMILY_LIST variable, type:

make test-fpga [FPGA_FAMILY_LIST="<fpga family directory name list>"]

To clean the files produced when testing all FPGA families, type:

make test-fpga-clean

To compile and test the document selected by the DOC, variable, type:

make doc-test [DOC=<document directory name>]

The resulting Latex .aux file is compared with a known-good .aux file. If the match the test passes; otherwise it fails.

To test all documents listed in the DOC_LIST variable, type:

make test-doc [DOC_LIST="<document directory name list>"]

To clean the files produced when testing all documents, type:

make test-doc-clean

To run all simulation, FPGA family and documentation tests, type:

make test

• Check out IOb-SoC

To clean all generated files, the command is simply

make clean-all