jetstream96 / qsimplanner Goto Github PK

When exporting the route to x-plane 11 "fms plans" folder it fails to export. But there are no failure when exporting the flight plan to other options for x-plane 11 such as jar design and flight factor aircraft.

The required runway distance doesn't increase as flex temp goes up.Instead,it goes lower for a higher flex temp.

Hello. I found this and was hopeing to use it for take-off calculations in the B738. However, when I try to run it, I get a mozglue.dll not found error. I installed Visual Studio 2012, but it still will not run.

As a side note, it would be very helpful if this was rewritten in C++ or Java.

Hi,

the link in the text of your page: https://github.com/JetStream96/QSimPlanner/blob/develop/src/Installer/readme.md
gives a 404

System.DllNotFoundException: Unable to load DLL 'mozglue': The specified module could not be found. (Exception from HRESULT: 0x8007007E)
at Gecko.Xpcom.Alloc(IntPtr size)
at Gecko.nsAString..ctor() in D:\temp\339b193\Geckofx-Core\nsString.cs:line 883
at Gecko.nsAString..ctor(String value) in D:\temp\339b193\Geckofx-Core\nsString.cs:line 895
at Gecko.Xpcom.Initialize(String binDirectory) in D:\temp\339b193\Geckofx-Core\Xpcom.cs:line 324
at QSP.UI.Views.MiscInfo.AirportMapControl.EnableBrowser() in C:\Data\Programming\Projects\QSimPlanner\Source Code\src\QSP\UI\Views\MiscInfo\AirportMapControl.cs:line 227
at QSP.UI.Views.MiscInfo.AirportMapControl.set_BrowserEnabled(Boolean value) in C:\Data\Programming\Projects\QSimPlanner\Source Code\src\QSP\UI\Views\MiscInfo\AirportMapControl.cs:line 32
at QSP.UI.Presenters.MiscInfo.MiscInfoPresenter..ctor(IMiscInfoView view, AirportManager airportList, Locator1 windTableLocator, Boolean enableBrowser, Func1 origGetter, Func1 destGetter, Func1 altnGetter) in C:\Data\Programming\Projects\QSimPlanner\Source Code\src\QSP\UI\Presenters\MiscInfo\MiscInfoPresenter.cs:line 28
at QSP.UI.Forms.QspForm.InitMiscInfoMenu() in C:\Data\Programming\Projects\QSimPlanner\Source Code\src\QSP\UI\Forms\QspForm.cs:line 334
at QSP.UI.Forms.QspForm.InitControls() in C:\Data\Programming\Projects\QSimPlanner\Source Code\src\QSP\UI\Forms\QspForm.cs:line 296
at QSP.UI.Forms.QspForm.b__25_0() in C:\Data\Programming\Projects\QSimPlanner\Source Code\src\QSP\UI\Forms\QspForm.cs:line 102
at QSP.UI.Forms.QspForm.ShowSplashWhile(Action action) in C:\Data\Programming\Projects\QSimPlanner\Source Code\src\QSP\UI\Forms\QspForm.cs:line 181
at QSP.UI.Forms.QspForm.Init() in C:\Data\Programming\Projects\QSimPlanner\Source Code\src\QSP\UI\Forms\QspForm.cs:line 97
at QSP.Program.Main(String[] args) in C:\Data\Programming\Projects\QSimPlanner\Source Code\src\QSP\Program.cs:line 83

I get this message when trying to open. Any idea?

It looks like the URL for the XML for the Eastbound and Westbound tracks are no longer available.

http://qsimplan.somee.com/nats/Westbound.xml
http://qsimplan.somee.com/nats/Eastbound.xml

Is it possible to get these files included with the source code?

QSimPlanner is failes to download wind aloft data. This used to work but for some reason it seems to be broken.

Uppon selecting current the Navigraph Navcycle the application quits on me with an 'unexpected error'. I originally had this issue with an older Navcycle, but it does persist with the current one. Also: The Navcycle is highlighted in red, even though it is current.

Of course the error might well be on my part, though I think everything should be fine. I tested the cycle in the Aerosoft Airbus and it works fine there, so the Navcycle itself should be ok.

Hello! Could you make take off and landing performance for the B767-300 Flight Factor?

Best regards!

I've tryed to use the 0609 AIRAC circle cause i use it for vasfmc and it was the only one i could obtain for free.

When i try to set the "Nav Data Location" path it says "Database Status: Failed to load".

How can i debug this problem?

First off, I love this tool. Makes my life so much easier being able to calculate takeoff and landing data for the airliners that I fly in the sim.

However I would like to help make it better by contributing to the performance data files by adding more flap settings and de-rated thrust settings.

I understand how to do the flaps. Take the charts from the FPPM and convert them into tables similar to the ones in the FCOM then load into the XML.

What I don't understand is how to get the de-rate data.
Looking at the code I can see that the 4 lines are full thrust weight, dry weight, wet weight and climb weight, but beyond that I have no clue.

If you can give me some instructions I will happily do the boring job of doing the conversions and loading them up, starting with the B738.

Additionally, which engines did you use for the current B738 data? I can't seem to figure out which one matches the FCOM and FPPM data I've found.

Cheers

Please fix the issue

Here is an updated NAVDATA

NavData.zip

Is there any way I can help with creating the profiles for the Airbus series?

Is it possible to add other takeoff options for B738 like TO1 or TO2 and other flaps configurations? In SBRJ
for example is impossible to always takeoff with flap 5 and this make me to use another programs. How can I help you to make this improvement? I really like this project.

Thanks for your amazing app!
As it says, the CL30 is by far the only good-level high performance business jet in X-plane, so, could you please add that performance data in? I have the AFM, maybe it could help you.
Best regards!

Let me first congratulate you for the amazing app you have developed. I am astonished! Keep up the good work.

As the title says, im requesting this feature! I have an FCOM that may be helpful. If you are interested, just contact me and I will happily send it to you :)

Thank you again for this gem!

there is an issue with the LDGWT. if you select LB and then select LB again and again it keeps going down.

I´ve been using QSimplanner for a lont time......and today I have to reinstall due local problem with partitions. So.;...when I´ve downloaded, Microsoft Windows 10 and Defense said to me that is a POTENTIAL HARMFUL CONTENT. I ran normally and it is all okay. And....of course.....I´ve sent a report to Microsoft. But....for my surprise......the program crashes all the time. Is it new 2004 Windows 10 update?

I wonder if this is possible? when I press calculate route if the program auto-selects runway based on weather data

Thanks

I just recently started using QSimPlanner (v0.4.8) and noticed a problem on the Landing tab. In the A/C Configuration section, if you click the "Request" button followed by "Use predicted landing fuel" with units set to pounds, an invalid landing weight is calculated.

I did discover a workaround -- if you select the units to KGS and repeat the request, the correct value is calculated in pounds.

I first noticed this issue using an aircraft that I had added, but confirmed that the same issue occurs using other aircraft from the Aircraft dropdown. Thanks.

Add instructions on how to build the program (if possible add a Makefile and make it independent from a windows platform).

Since 1 April, the QSimPlanner has been failing to downloading wind data, on the Questions & Bug Reports page of QSimPlanner's website, someone mentioned that possible cause is that the NOAA GFS had new variable names, which the QSimPlanner did not update to follow up, making the application failed to download wind data.

no real description of how to fix this.