This repo uses submodules, so execute this after cloning: git submodule update --init --recursive

1. mbed CLI
2. ARM GCC toolchain

This app requires GCC toolchain - it is set by default, but can be reset with mbed toolchain GCC_ARM command.

To build:

1. mbed target WUNDERBAR (only needed once, default target is WUNDERBAR_APP_BIN)
2. mbed compile --profile tools/debug.json -l tools/wunderbar.ld (--profile tools/release.json can be used to compile release/optimized binary)

To flash: JLinkExe -commanderscript flashwb.jlink

To build:

1. mbed compile --profile tools/debug.json -l tools/wunderbar.ld

To flash:

1. Switch Wunderbar to DFU mode (press & release reset button while user button is pressed)
2. dfu-util -R -d 15a2:1000 -a 0 -D BUILD/WUNDERBAR_APP_BIN/GCC_ARM/wunderbarv2_application.bin
3. Reset Wunderbar to APP mode (reset Wunderbar with reset button only)