4D Systems Raspberry Pi Library for Visi-Genie
Library for the Raspberry Pi to allow easy communication between 4D Intelligent Display modules running ViSi-Genie programmed from Workshop 4, and the Raspberry Pi.
This library is also required for the Raspberry Pi demo programs.
=======================================================
make
sudo make install
=================================
sudo make uninstall
=====================================================================
-
Connect your raspberry Pi up to the Internet and download WiringPi library from github:
cd
git clone git://git.drogon.net/wiringPi
cd wiringPi
./build
-
This will then download and install the wiringPi library, assuming you have git installed on your Raspberry Pi already.
-
Please see here for more detail if you need to install git also (https://projects.drogon.net/raspberry-pi/wiringpi/download-and-install/)
=================================================================================
-
From terminal, launch leafpad (or your chosen editor) with root:
sudo leafpad
-
Nagivate to /boot/cmdline.txt and remove the following text (LEAVE everything else intact)
kgdboc=ttyAMA0,115200 console=tty1
-
Save the file, overwriting the existing one.
-
Navigate and edit /etc/inittab
-
Comment out the bottom line by putting a '#' symbol at the start of it, where the bottom line is:
T0:23:respawn:/sbin/getty -L ttyAMA0 115200 vt100
-
Save the file, overwriting the existing one
-
Reboot your Raspberry Pi