LoadTester is designed to simulate alarm points being triggerd including Tampers and Troubles. There are 10 alarm points codded with each subgrouped into Alarm, Trouble, and Tamper. This means that over 30 Relays are needed to control all points, this is done with two 16-Channel Relay Module hooked into a arduino mega via Jumperwires in sequence from pins 22-51.

Inorder to disable Random, Alarm, Trouble, and Tamper. Ground the pins that are refranced in the code.

Default settings are:
--Potetiometer's Disabled
--Mean Time is 11 second
--Random Seed = A0
--Switch pins

Random = 2
Alarm = 3
Tamper = 4
Trouble = 5

--Pot Pins

Alarm = A1
Tamper = A2
Trouble = A3

--Multiplier = 25

To enable and disable live potetiomiter input just comment the declerations.

Parts list (This is quantiy of parts needed not quantity to buy of links):
--2x 16-Channel Relay Module
--Arduino Mega
--Dupont Wires
--4x Two Posistion Switchs (Optional but recomened)
--3 10kΩ potentiometer (Optional)

Based off of code by Donald Cook
Required Librarys:
--SimpleTimer library by Marcello Romani avalable at https://github.com/schinken/SimpleTimer