jason0x43 / alfred-nest Goto Github PK

Trying to set the cooling point, at least while in range mode, returns a 400 error

The new version is working great! Thanks for it.

I'm having problems switching to Celsius, it shows an error Unknown command ''

nest >> config >> scale >> celsius

Wanted to try the new beta but should we be worried "Jason"?

Does this plugin support Alfred 3? I hadn't seen anything about AppleScript changes.

I've never received any kind of login prompt, and subsequently any commands (nest nest, nest status) never return any information. Even nest log closes Alfred upon pressing enter but doesn't invoke anything.

Steps to reproduce:

1. Authenticate Nest Plugin
2. Set Default Nest Device
3. Issue change temp command: nest temp 65 Changing the temperature from it's current actual value of 68 to 65. Nest will now say "Heating to 65 degrees"
4. Attempt to Issue change temp command: nest temp 68, to change the temperature back to it's original current value of 68.

Expected Result:

Issued command is successful and the Nest is set to it's original temp of 68.

Actual Result:

I'm unable to issue the #4 command. It will only let me complete the Alfred command if the temperature is different from the "Current temperature". I should be able to send a command that sets the value back to it's current value. In the example above, I had set it to a different value very briefly but was unable to set it back.

Typing nest and any other command such at temp returns nothing.

Great workflow. I'd like to implement fan timer support--so you can run just-the-fan for a set amount of time. Related: https://developers.nest.com/documentation/api-reference/overview#hasfan

Commands like:

nest fan on - turns the fan on
nest fan off - turns the fan off
nest fan 15m - set fan for 15 minutes
nest fan 1h - set fan for 1 hour

I haven't touched go yet, and wont be able to for a while so I thought I'd leave this here to see if anyone else is interested in helping (:

Not sure if this software is still maintained, but this dialog now pops when trying to activate the Alfred Nest workflow.

Update to use current go-alfred, reorganize workflow to follow same model as alfred-{toggl,weather,slack}.