Allow user to map for the Flag/Unflag/Reject attribute as well as colors and stars.

As I gather, OSC is a MIDI v2 of some sorts.

Open Sound Control (OSC) is a content format for messaging among computers, sound synthesizers, and other multimedia devices that are optimized for modern networking technology. Bringing the benefits of modern networking technology to the world of electronic musical instruments, OSC's advantages include interoperability, accuracy, flexibility, and enhanced organization and documentation.

Androind has OSCPad, while iOS has touchOSC as (I'm told) quite resposive software implementations of OSC.

http://opensoundcontrol.org/introduction-osc

Only a sporadic issue, which makes it hard to target.

On some occasions, moving to the next image will not adjust the white balance position on the BCR controller, so it does not reflect the current LR slider position.

Moving the knob will cause the LR slider jump to catch up, if that makes sense!

Wow! Since Knobroom r686 seems to allow Develop Presets to be targets of the CC controller, pretty please allow the same for the Adjustment Brush Presets... This would save soooo much time!!!
Click, paint in Highlight recovery, click, paint in skin retouch, click paint in shadow enhancement... Instead of press K to bring up adjustment brush, klick on the custom button to bring up pull down menu, select highlight revery brush, start painting, etc. I tried to program a Key Maestro macro to do this, but had trouble because the position of the different items on the pull down menu change dependent on what brush was used before... (and because it was the first thing I tried to program with that program... )

In any case: I hope your expertise will allow for this! :)

PS: Great work so far! Amazing how this is moving now!

D.

I using the M-Audio Oxygen8, everything work just fine except the Keyboard (or Note in MIDI Mapping in KR), I mapped the Note to Navigate (prev/next), but when i press the Keyboard it always return 2 events (or just like 2 clicks or just like it return pressed/depressed state) and it always skip the photo by +1.

My mapping in KR.
http://upic.me/i/kx/scrn_2556-04-17at12.52.04pm.jpg

Allow user to map the "New virtual copy" function (cmd + ' ).

Allow mapping for the following sliders :

Shadows (mag/green)
Red primary hue
Red primary Saturation
Green primary hue
Green primary saturation
Blue primary hue
Blue primary saturation

Could be great to be able to reset a value to default.
(that's a lot of sliders to map...)

Example : tweaking the gray mixer with rotary knobs, you could reset any color to 0 by clicking the concerned rotary knob.

As I just switched controllers and even before trying to get the optimal mapping going I came across this quite often: The drop down menu in the mapping area almost follows the set up in LR...

In Lightroom the sequence (at least of the parameters that I think can be controlled):
White Balance
Temp
Tint
Exp2012
Contr2012
Highlights2012
Whites2012
Blacks2012
Clarity2012
Vibrance
Satuaration

etc.

I think it would be easier if the sequences would match each other...

Thx!

D.

When an image is deleted from Lightroom, Knobroom throws an error:

An internal error has occured. ?:0: attempt to index a nil value

Allow to map for enabling the clipping alert (blue/red).
Similar to the shortcut "J".

Adjusting Lightroom sliders is slow and unresponsive, Lightroom provides only few image updates per second.

In Develop module :
allow user to map for the preview (on/off) button of each panel (small switch on the left of the panels' header).

Not sure if this is intended. For me it would be more practical to have Knobroom running until I tell it to stop...

D>

Extra points if a knob can be rotated to step through them. Though single key binds would still be essential!

Wanting to map my BCF2000 to the graduation tool then use the sliders to control the options under the grad tool, can this be done ???

Fantastic feature in Paddy, lets you apply the last develop settings to current image.

Stops the need for copy/paste settings - super efficient!

As per Paddy for Lightroom, values of the sliders etc are shown in a popup when using the MIDI controller. Very useful indeed!

The Automap Software from Novation has a "Increment/Decrement Mode":

In this mode, the encoders send information to tell a Thing in which direction the encoder has been turned and how fast it has been turned. Not all Things are able to interpret this data but it is very useful in advanced music software such as Max /MSP.

When set to this mode an encoder will send a value of 1 for a slow clockwise turn. The sent value will increase up to 64 as the encoder is turned faster. Turning an encoder anticlockwise will send a value of 65 for a slow turn. This value will increase up to 127 for a fast turn.

In Develop module :
allow user to toggle (open/collapse or open if "Solo" mode enabled) between Basics, Tone Curve, HSL, etc.
Similar to the keyboard shorcuts "cmd + 0", "cmd + 1", "cmd + 2", etc.

Found it in the mapping section... Maps up nicely, but I cannot see what it does... What's it for?

D.

When I press start knobroom in "plug-in extras". It shows "An internal error has occurred：bad argument #1 to '?' (String expected, got nil)". Can somebody tell me why?? > <. Now it won't work with my Novation Nocturn...

Thanks

Before updating LR 5.2 to the latest version - is it compatible with the latest ver (I think it's 5.7)

I originally wasn't even sure that I could edit my former entries in the MIDI mapping. I think it would help to be able to highlight the entry I'm trying to edit... For example: It's possible to change "CC 11 develop Saturation" to "CC 11 develop Sharpness" but I didn't think it was... Hoping that I made this clear...\

D.

Hi,

When i discovered knobroom, my dream was to acquire a nanokontrol. I buy it, setting it, but i was sad of the matter of "jumping" value when going to develop next image. (ie : I develop a +1 exposure photo, then when i move knob on the next photo, i jump to +1.1 directly).

So i read a lot and discover that bcr2000 is good with his "virtual" knob.
So i buy a BCR2000...
And now trying to setting it up
But i still got the "jumping" value, knob doesn't virtually take the LR5 sliders value

What is the walthrought to avoiding "jumping" ?

My BCR2000 is connected on USB
I have mapping all knob on the plugin menu
I choose
MIDI In : BCR2000 port 1
MIDI Out : BCR2000 port1
Plugin : v0.2.779
License : registered to [email protected]
Lighroom : v5

Ps : sorry for my english, i'm french.

Strange one. This image:

http://www.rossharveyweddings.com/images/5423.jpg

Will crash LR if selected with KR running. Turn KR off, and it's fine.

Background was brushed with maximum exposure, highlights and shadows.

Happened on a few images of this style.

OSX 10.6.8, BCR2000 (Firmware 1.1)

I.e. for assigning a preset to a button, or for the incremental slider jumps (as per clicking the slider and using arrow keys).

Mouse wheel being assigned to moving a slider.

So for example, using both of these requests:

Press A for shadows, then use mouse wheel to adjust.

I love that those parameters are controllable... I would like to map them where I want! ;)

Thx.

D.

Index 0 error.

Allow user to map the "New Snapshot" (cmd + N) and "New Preset" (cmd + shft + N) functions.

I love the additional set up options in 686, unfortunately I can check them out as the plug in doesn't let me select my midi controller and doesn't let me connect... :(

Back to 679 for me!

D.