LAEMP-Panel is a Zigbee controllable (e.g. philips hue) RGBY + W spot, which can be soldered at home and is easy to assemble. The extra yellow channel gives a much wider dynamic. This is archived by alternating CW/WW/A (Cold-, Warm-White, Amber) and RGB LEDs. LAEMP-Panel can be mounted on mini-tripods and is powered via 5V USB Type-C. A ZigBee bridge (e.g. Philips Hue) is needed for control.

LAEMP-Panel is a sister project to LAEMP-Prism

There are two firmwares to be flashed, one for the ESP32 and one for the E75-2G4M20S.

This is a simple Arduino project and can be flashed via Arduino (initially built on Arduino 1.8.19).

Please refer to the awesome works of PeeVeeOne to flash Light_ColorLight_JN5168_RGB onto the E75-2G4M20S module.

• Profile CRI
  • Increase CRI by selectively adding colors to WW/CW (i.e. green)
• Update Baseboard to v2

Copyright Jana Marie Hemsing 2023. This source describes Open Hardware and is licensed under the CERN- OHL-S v2.

You may redistribute and modify this source and make products using it under the terms of the CERN-OHL-S v2 (LICENSE).

This source is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN-OHL-S v2 for applicable conditions.

Source location: https://github.com/Jana-Marie/LAEMP-Panel/ As per CERN-OHL-S v2 section 4, should You produce hardware based on this source, You must where practicable maintain the Source Location visible on the external case of LAEMP-Panel or other products you make using this source