ESP32 port of Tasmota Prepared for Wemos ESP32.

• Wifi
• Flash (by NVS)
• Relays
• Switches (as inputs)
• Webserver (USE_WEBSERVER)
• MQTT (MQTT_USE)
• Logging (Serial, Web)
• NTP (with simple one zone)
• HTTP Update

• DOMOTICZ (USE_DOMOTICZ)
• Home Assistant (USE_HOME_ASSISTANT)
• Emulation (USE_EMULATION)
• I2C (USE_I2C)
• SPI (USE_SPI)
• MDNS Discovery (USE_DISCOVERY)
• WS2812 (USE_WS2812)
• Counter
• DHT (USE_DHT)
• DS DS18x20 (USE_DS18x20 or USE_DS18x20_LEGACY)
• SHT (USE_SHT, USE_SHT)
• HTU (USE_HTU)
• BMx (USE_BMP, USE_BME680, USE_BH1750)
• VEML6070 (USE_VEML6070)
• TSL2561 (USE_TSL2561)
• ADS1115 (USE_ADS1115)
• INA219 (USE_INA219)
• DISPLAY (USE_DISPLAY)
• MHZ19 (USE_MHZ19)
• ENERGY SENSOR (USE_ENERGY_SENSOR)
• SENSEAIR (USE_SENSEAIR)
• ARILUX RF (USE_ARILUX_RF)

• USE_ADC_VCC
• USE_IR_REMOTE
• SNFBRIDGE
• ADC
• LED

Please follow Installation Instructions

If working with Arduino IDE: copy all project libraries from \lib to Arduino\libraries

External additional libraries (in lib directory):

• ESP32Ticker
• WebServer-esp32

If working with Arduino IDE: set Tool->Board->ESP32 Dev Module

To compile in user_config_override.h should be:

#undef USE_ADC_VCC    // Needs to be ported
#undef USE_IR_REMOTE  // IRremoteESP8266 needs to be ported
#undef SNFBRIDGE      // No commercial device, no sense porting

Additionally add:

• Support of unsigned long long in WString

In code there are marked parts with #warning

This program is licensed under GPL-3.0