一启用这个gfwlist，过会儿就都无法上网了，用原版不会 about dnsmasq HOT 14 CLOSED

这个ss-rss网址是？

from dnsmasq.

在别人的源码基础上修改的https://github.com/cpexplorer/Luci/tree/master/luci-app-shadowsocks-rss
配合这个gfwlist
https://github.com/cpexplorer/packages/tree/master/net/ipset-lists-fix
好像也有网友遇到类似问题，我也是用着无线

from dnsmasq.

看起来复杂得很，有没有已经转换好的dnsmasq配置文件？

from dnsmasq.

gfwlist上的，dnsmasq转发到哪里了，贴出几行你的dnsmasq 规则

from dnsmasq.

china-banned-pollution.conf:
server=/030buy.com/127.0.0.1#7453 server=/0pointer.de/127.0.0.1#7453 server=/0rz.tw/127.0.0.1#7453 server=/0to255.com/127.0.0.1#7453 server=/1000giri.net/127.0.0.1#7453

ipset-china-banned.conf:
ipset=/030buy.com/china-banned ipset=/0pointer.de/china-banned ipset=/0rz.tw/china-banned ipset=/0to255.com/china-banned ipset=/1000giri.net/china-banned

转发给了pdnsd的端口7453

补充一下，早上一直是无法上网现象，刚重新启用了下，无线网异常了一会儿（比如ssh进192.168.1.1一直无法连上）之后，现在好像又正常了

from dnsmasq.

无法上网时，发现dnsmasq挂了

from dnsmasq.

我也发现了这个问题，请试用最新的commit

from dnsmasq.

使用最新commit测试中，跑queryperf，cpu占用不高于4%；linksys WRT1900ACS。
目前还没出现问题。
makefile：https://github.com/cokebar/lede-dnsmasq-fastlookup

from dnsmasq.

不知两位使用石像鬼固件不，这个增强版dnsmasq 貌似 （自己没技术去排查，所以只是一种感觉）跟石像鬼有冲突，表现为使用一段时间后无线反复掉线重启，严重时路由频繁自动重启。换成原版后尚未发现这个问题。使用的增强版包括2.7.2以及这个最新。

from dnsmasq.

from dnsmasq.

这个问题和dnsmasq无关。

from dnsmasq.

@infinet 这个话题可以关闭了，在不开石像鬼的固件上一切使用正常

from dnsmasq.

[ 6427.839063] dnsmasq[4026]: segfault at 50 ip 0000000000416cde sp 00007ffc539b2d10 error 4 in dnsmasq[400000+38000]
[ 6436.807904] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 6436.846632] 8021q: adding VLAN 0 to HW filter on device eth1
[ 6436.879693] e1000: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 6436.882008] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 6445.562012] dnsmasq[21899]: segfault at 50 ip 0000000000416cde sp 00007ffccdfde060 error 4 in dnsmasq[400000+38000]
[ 6450.663567] pppoe-wan: renamed from ppp0
[ 6453.560282] dnsmasq[21939]: segfault at 50 ip 0000000000416cde sp 00007fff293ece80 error 4 in dnsmasq[400000+38000]
[ 6461.562251] dnsmasq[21985]: segfault at 50 ip 0000000000416cde sp 00007ffe0704a550 error 4 in dnsmasq[400000+38000]
[ 6492.742055] IMQ driver unloaded successfully.
[ 6493.159569] Hooked IMQ after mangle on INPUT
[ 6493.159781] Hooked IMQ after mangle on FORWARD
[ 6493.159929] IMQ driver loaded successfully. (numdevs = 1, numqueues = 1, imq_dev_accurate_stats = 1)
[ 6493.160220] Hooking IMQ before NAT on PREROUTING.
[ 6493.160370] Hooking IMQ after NAT on POSTROUTING.
[21082.900023] hrtimer: interrupt took 3130128751 ns
[21180.486575] dnsmasq[22026]: segfault at 50 ip 0000000000416cde sp 00007ffcb56d0620 error 4 in dnsmasq[400000+38000]
[21207.955989] dnsmasq[22396]: segfault at 50 ip 0000000000416cde sp 00007fffeffd75d0 error 4 in dnsmasq[400000+38000]
[21220.492293] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[21220.577770] 8021q: adding VLAN 0 to HW filter on device eth1
[21220.684276] e1000: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[21221.543096] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[21222.402504] dnsmasq[22423]: segfault at 50 ip 0000000000416cde sp 00007ffcd57297e0 error 4 in dnsmasq[400000+38000]
[21229.528264] pppoe-wan: renamed from ppp0
[21232.792754] dnsmasq[22508]: segfault at 50 ip 0000000000416cde sp 00007fff2172b5f0 error 4 in dnsmasq[400000+38000]
[21287.724424] IMQ driver unloaded successfully.
[21288.087339] Hooked IMQ after mangle on INPUT
[21288.103135] Hooked IMQ after mangle on FORWARD
[21288.103374] IMQ driver loaded successfully. (numdevs = 1, numqueues = 1, imq_dev_accurate_stats = 1)
[21288.103697] Hooking IMQ before NAT on PREROUTING.
[21288.103875] Hooking IMQ after NAT on POSTROUTING.
[21987.182119] dnsmasq[22544]: segfault at 50 ip 0000000000416cde sp 00007ffd5cfe68d0 error 4 in dnsmasq[400000+38000]
[22027.708571] dnsmasq[25680]: segfault at 50 ip 0000000000416cde sp 00007ffd8999e0d0 error 4 in dnsmasq[400000+38000]
[22048.164758] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[22048.199787] 8021q: adding VLAN 0 to HW filter on device eth1
[22048.328149] e1000: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[22048.740051] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[22066.699120] dnsmasq[25715]: segfault at 50 ip 0000000000416cde sp 00007fff2e010b20 error 4 in dnsmasq[400000+38000]
[22078.103149] pppoe-wan: renamed from ppp0
[22182.522315] IMQ driver unloaded successfully.
[22183.108346] Hooked IMQ after mangle on INPUT
[22183.108521] Hooked IMQ after mangle on FORWARD
[22183.108699] IMQ driver loaded successfully. (numdevs = 1, numqueues = 1, imq_dev_accurate_stats = 1)
[22183.121193] Hooking IMQ before NAT on PREROUTING.
[22183.121499] Hooking IMQ after NAT on POSTROUTING.
[23908.431240] dnsmasq[27185]: segfault at 50 ip 0000000000416cde sp 00007ffd8513c110 error 4 in dnsmasq[400000+38000]
[23934.570023] e1000: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None

上面错误信息 network 自动重启

from dnsmasq.

@nu1ee 也是石像鬼固件吧？

from dnsmasq.