After successful build, it will upload AnyKernel3 in Action, which has turned off device check, please flash to phone in Twrp.

First fork this repository to your repository and edit config.env as follows, then click Star or Action, you will see Build Kernel option on the left side, click it and you will see Run workflows on the top of the big dialog box on the right side, click it and it will start the build.

Type your kernel link

e.g. https://github.com/begonia-dev/android_kernel_xiaomi_mt6785

Type your kernel branch

e.g. 13.0

Type your kernel defconfig

e.g. begonia_user_defconfig

Type in the image you need, usually the same as BOARD_KERNEL_IMAGE_NAME in your aosp-device tree.

e.g. Image.gz-dtb

The default version is zyc clang17.0.0, if you need to change it, you can go to build-kernel.yml to modify it

Usually Clang12 will pass most kernel builds of 4.14 and above. My own Redmi Note 8 Pro 4.14 is using clang17.0.0

Some kernels require some build commands to be typed in manually in order to build properly, so please don't type them in if you don't need to. Separate commands with spaces.

e.g. LLVM=1 LLVM_IAS=1

This is used to optimize the kernel, but sometimes it causes errors, so it is provided that it can be disabled, set to true to disable.

Please enable this parameter if the kernel does not have it, the module requires

If your kernel also needs to be flashed with DTBO image, set it to true.

• Ravindu
• AnyKernel3
• AOSP
• xiaoxindada
• xiaoleGun