igo-r / lumi-router-jn5169 Goto Github PK

Hello, I'm an user of this firmware which I find great! Thank you for your work. I wanted to ask a question related to the last release 2021.2.19. In the notes It says " Removed On/Off Cluster" I was wondering if this means there won't be any more an entity/switch/toggle that the device currently presents. Right now I use this function extensively to check if the device is actually able to receive and send messages in my network (Using ZHA in Home Assistant).

Hi,

I try to use your firmware on my Aqara ZHWG11LM (latest openlumi firmware).

root@OpenLumi:~# jnflash /tmp/LumiRouter.bin
Flash /tmp/LumiRouter.bin
JennicModuleProgrammer Version: 0.11 (r1234)
Logging Serial port opened at iInitialSpeed (= 38400) to /tmp/flasher.log
Setting baudrate for port 3 to 1000000
Detected Chip: JN5169
MAC Address:   00:15:8D:00:05:XX:XX:XX
Erasing = 0%
Writing = 100%
Success!
root@OpenLumi:~# jntool router_mode
Erasing PDM...
set device type = router
Starting network scan

Seems to be all fine, but it doesn't connect to my network (zigbee2mqtt with ZBBridge, joining is allowed)...

Any idea whats going wrong or how to debug this?

Добрый день!
После попытки обновления шлюз DGNWG05LM перестал запускаться , не подскажите как откатиться ?

Enter main_loop() Now##

Normal Boot
Hit any key to stop autoboot: 0

NAND read: device 0 offset 0x300000, size 0x700000
7340032 bytes read: OK

NAND read: device 0 offset 0xa00000, size 0x100000
1048576 bytes read: OK
Kernel image @ 0x80800000 [ 0x000000 - 0x2abfb8 ]
ERROR: Did not find a cmdline Flattened Device Tree
Could not find a valid device tree

If I use this firmware will I be able to access the internal devices (sound, light, etc) of the gateway ?

I have some aqara motion sensor RTCGQ11LM connect to this router, illuminance e occupancy working fine, but battery level, voltage and temperature not working. If i connect sensor to coordinator, all working fine.

Hello.
After a failed upgrade of the QBCZ11LM socket, it died (details Koenkk/zigbee-OTA#28)

Is it possible to make a new firmware to the outlet to restore functionality?

Здравствуйте.
После неудачного обновления розетки QBCZ11LM она умерла (подробности Koenkk/zigbee-OTA#28)

Возможно ли сделать новую прошивку на розетку для восстановления работоспособности?

I have 3 Aqara Gateway devices flashed with OpenWrt. The ZigBee chip is flashed with your firmware and all 3 act as routers. All 3 devices are the same model and are connected to ZigBee2MQTT (Sonoff Zigbee Dongle-P CC2652P coordinator). One of them constantly falls from the network and the devices paired to if go offline as well. I tried to pair the device again and also reflashed the ZigBee chip. I still do not know what the problem is. Any suggestions?

hi i am having trouble flashing firmware to switch mode my xiaomi mijia gateway

root@Xiaomi_Mijia_Gateway:# jnflash /tmp/Lumi_Router.bin
Flash /tmp/Lumi_Router.bin
JennicModuleProgrammer Version: 0.11 (r1234)
Logging Serial port opened at iInitialSpeed (= 38400) to /tmp/flasher.log
Setting baudrate for port 3 to 1000000
Error setting (bootloader) baudrate to iProgramSpeed (1000000) (2)
Logging Error setting (bootloader) baudrate to iProgramSpeed (= 1000000) to /tmp/flasher.log
Error setting (bootloader) baudrate to iProgramSpeed (1000000) (1)
Logging Error setting (bootloader) baudrate to iProgramSpeed (= 1000000) to /tmp/flasher.log
Error setting (bootloader) baudrate to iProgramSpeed (1000000) (0)
Logging Error setting (bootloader) baudrate to iProgramSpeed (= 1000000) to /tmp/flasher.log
root@Xiaomi_Mijia_Gateway:#