This repo was based on @hopsoft's docker-graphite-statsd docker image and was used as base for "official" Graphite docker image with his permission. Also, it contains parts of famous @obfuscurity's synthesize Graphite installer. Thanks a lot, Nathan and Jason!

Any suggestions / patches etc. are welcome!

Graphite & Statsd can be complex to setup. This image will have you running & collecting stats in just a few minutes.

docker run -d\
 --name graphite\
 --restart=always\
 -p 80:80\
 -p 2003-2004:2003-2004\
 -p 2023-2024:2023-2024\
 -p 8125:8125/udp\
 -p 8126:8126\
 graphiteapp/graphite-statsd

This starts a Docker container named: graphite

Please also note that you can freely remap container port to any host port in case of corresponding port is already occupied on host. It's also not mandatory to map all ports, map only required ports - please see table below.

That's it, you're done ... almost.

• Nginx - reverse proxies the graphite dashboard
• Graphite - front-end dashboard
• Carbon - back-end
• Statsd - UDP based back-end proxy

By default, statsd listens on the UDP port 8125. If you want it to listen on the TCP port 8125 instead, you can set the environment variable STATSD_INTERFACE to tcp when running the container.

Please also note that you can freely remap container port to any host port in case of corresponding port is already occupied on host.

Built using Phusion's base image.

• All Graphite related processes are run as daemons & monitored with runit.
• Includes additional services such as logrotate.

Let's fake some stats with a random counter to prove things are working.

while true; do echo -n "example:$((RANDOM % 100))|c" | nc -w 1 -u 127.0.0.1 8125; done

Open Graphite in a browser.

• http://localhost/dashboard
• http://localhost/render?from=-10mins&until=now&target=stats.example

Update the default Django admin user account. The default is insecure.

• username: root
• password: root
• email: [email protected]

First login at: http://localhost/account/login Then update the root user's profile at: http://localhost/admin/auth/user/1/

Read up on Graphite's post-install tasks. Focus on the storage-schemas.conf.

1. Stop the container docker stop graphite.
2. Find the configuration files on the host by inspecting the container docker inspect graphite.
3. Update the desired config files.
4. Restart the container docker start graphite.

Note: If you change settings in /opt/graphite/conf/storage-schemas.conf be sure to delete the old whisper files under /opt/graphite/storage/whisper/.

Important: Ensure your Statsd flush interval is at least as long as the highest-resolution retention. For example, if /opt/statsd/config.js looks like this.

flushInterval: 10000

Ensure that storage-schemas.conf retentions are no finer grained than 10 seconds.

[all]
pattern = .*
retentions = 5s:12h # WRONG
retentions = 10s:12h # OK
retentions = 60s:12h # OK

A management interface (default on port 8126) allows you to manage statsd & retrieve stats.

# show all current counters
echo counters | nc localhost 8126

More info & additional commands.

You may find it useful to mount explicit volumes so configs & data can be managed from a known location on the host.

Simply specify the desired volumes when starting the container.

docker run -d\
 --name graphite\
 --restart=always\
 -v /path/to/graphite/configs:/opt/graphite/conf\
 -v /path/to/graphite/data:/opt/graphite/storage\
 -v /path/to/statsd:/opt/statsd\
 graphiteapp/graphite-statsd

Note: The container will initialize properly if you mount empty volumes at /opt/graphite/conf, /opt/graphite/storage, or /opt/statsd.

If you have a Memcached server running, and want to Graphite use it, you can do it using environment variables, like this:

docker run -d\
 --name graphite\
 --restart=always\
 -p 80:80\
 -p 2003-2004:2003-2004\
 -p 2023-2024:2023-2024\
 -p 8125:8125/udp\
 -p 8126:8126\
 -e "MEMCACHE_HOST=127.0.0.1:11211"\  # Memcached host. Separate by comma more than one servers.
 -e "CACHE_DURATION=60"\              # in seconds
 graphiteapp/graphite-statsd

Also, you can specify more than one memcached server, using commas:

-e "MEMCACHE_HOST=127.0.0.1:11211,10.0.0.1:11211"

The following command will start the graphite statsd container through docker-compose

docker-compose up

• Introduction to Docker
• Official Statsd Documentation
• Practical Guide to StatsD/Graphite Monitoring
• Configuring Graphite for StatsD

Build the image yourself.

1. git clone https://github.com/graphite-project/docker-graphite-statsd.git
2. docker build -t graphiteapp/graphite-statsd .

Alternate versions can be specified via --build-arg:

• version will set the version/branch used for graphite-web, carbon & whisper
• graphite_version, carbon_version & whisper_version set the version/branch used for individual components
• statsd_version sets the version/branch used for statsd (note statsd version is prefixed with v)

Alternate repositories can also be specified with the build args graphite_repo, carbon_repo, whisper_repo & statsd_repo.

To build an image from latest graphite, whisper & carbon master, run:

docker build -t graphiteapp/graphite-statsd . --build-arg version=master

To build an image using a fork of graphite-web, run:

docker build -t forked/graphite-statsd . --build-arg version=master --build-arg graphite_repo=https://github.com/forked/graphite-web.git