hu55a1n1 / rc-switch Goto Github PK

Quasar AM rx1 rx2 rx3, tx1,tx2,tx3
http://www.quasaruk.co.uk/acatalog/info_QAM_TX1_433.html

to support TI Stellaris Launchpad 
(https://github.com/energia/Energia/wiki/Hardware)
on ENERGIA IDE (http://energia.nu/)  (Arduino like IDE)

What steps will reproduce the problem?
1. I have a ligth socket like this one: h
ttp://www.dx.com/p/e27-to-e27-remote-control-light-bulb-socket-ac-110-250v-10475
5#.VabJd_ntlBc
2. I have an 315Mhz RF link.
3. I have read the remote with the RF receiver and got:

Decimal: 8057592 (24Bit) Binary: 011110101111001011111000 Tri-State: not 
applicable PulseLength: 206 microseconds Protocol: 1
Raw data: 
6372,168,656,568,244,580,248,568,256,580,236,172,652,572,244,136,672,560,268,556
,268,548,296,516,384,436,284,116,1804,24,1972,300,564,192,2252,216,376,256,96,32
,436,56,3960,104,668,152,680,140,708,

4. Then I am trying to send the same code to activate the light switch:
mySwitch.send(8057592, 24);

But nothing happens.

I have tryed this library with other light switches and it works fine.
What am I missing?

Thank you very much for making this great library.
Dan.

Branch name: raspberry-quigg

Purpose of code changes on this branch:
- Send Commands to Quigg Devices
- A "little" code rearrangement
- Compile Option for RaspberryPi (use -DRASPBERRY)

When reviewing my code changes, please focus on:
- is everything working?
  - Commands to all other devices
  - Does it still work on Arduino et al?
  - Do the receiver methods still work? (Couldn't test this at all)

- Are these changes fully backward compatible?

Not for RPi reviewers:
Minimum example for an executable:
#include "RCSwitch.h"
int main(int argc, char*argv[])
{
  if(wiringPiSetup() == -1)
    return 1;
  piHiPri(20);
  RCSwitch mySwitch;
  mySwitch.enableTransmit(0); // PIN 0;
  mySwitch.toggleTypeD("111100001111", 3, 1); // Quigg's system code is 12-bit, unit code can be 0 (=all) or 1-4.
  return 0;
}

After the review, I'll merge this branch into:
/trunk

Malte