happy-ferret / burg Goto Github PK

What steps will reproduce the problem?
1. bootdisk formatted as BTRFS
2. sudo update-burg
3. /usr/local/sbin/burg-probe: error: cannot find a device for / (is /dev 
mounted?).
4. GRUB happily stays where and as it is.....

What is the expected output? What do you see instead?
I expect to see Burg configured, instead I see:
/usr/local/sbin/burg-probe: error: cannot find a device for / (is /dev 
mounted?).


What version of the product are you using? On what operating system?
BURG:  current stable release
OS: Ubuntu Desktop 11.4 Natty Narwhal (last update this morning)


Please provide any additional information below.

I tried to install BURG in different scenarios.
* Laptop with Intel x64 CPU 
* Desktop with AMD x64 CPU 
Both two partitions (swap + \)  formatted as BTRFS

* existing installs (all the way upgraded from jaunty)
* brand new installs (Lucid+Natty)

After  reformatting as Ext4 I could install Burg2.
After  reformatting as BTRFS, no go!

In all these scenarios I had no issues with GRUB!
My inkling is that burg-probe is causing the issue.

What steps will reproduce the problem?
1. Add custom boot to 40_custom
2. Execute sudo update-burg
3. Watch as it is ignored

What is the expected output? What do you see instead?
I expect the entry added to 40_custom to appear

What version of the product are you using? On what operating system?
Karmic Koala (Grub2)

Please provide any additional information below.

What steps will reproduce the problem?
1.terminal gives:
ben@ben-desktop:~$ sudo update-burg
Generating burg.cfg ...
/usr/sbin/burg-probe: error: cannot stat `/boot/burg/locale'.
No path or device is specified.
Try `/usr/sbin/burg-probe --help' for more information.

2.
3.

What is the expected output? What do you see instead?
update completed?

I get:

Generating burg.cfg ...
/usr/sbin/burg-probe: error: cannot stat `/boot/burg/locale'.
No path or device is specified.
Try `/usr/sbin/burg-probe --help' for more information.

What version of the product are you using? On what operating system?
The latest, and Ubuntu 10.04

Please provide any additional information below.

What steps will reproduce the problem?
1. Set GRUB_DEFAULT="The name of an entry"
2. Run sudo update-{grub,burg}
3. Reboot

What is the expected output? What do you see instead?
Expected: Burg should default to the named entry from GRUB_DEFAULT
Actual: Burg ignores the value and defaults to entry 0

What version of the product are you using? On what operating system?
1.98+20100 on Ubuntu 10.04 64-bit

Please provide any additional information below.

What steps will reproduce the problem?
1. When I write in a terminal:  sudo update-burg I got the message:
/etc/burg.d/00_header: 226: console: not found

NO MATTER WHAT !!!

2. I tried different ways of installation, etc 
BUT NO RESULTS...

Help me please...

What version of the product are you using? On what operating system?

Im using Ubuntu 10.10

What steps will reproduce the problem?
1. Boot to rEFIt. Notice how moving between the different icons is instant.
2. Select BURG.
3. Move between the different icons.

What is the expected output? What do you see instead?
I should see an instant refresh when moving between the icons.
Instead, I can see the how the screen is refreshed when i select a different 
icon, specifically I can see the back color being filled.

What version of the product are you using? On what operating system?
BURG64 (latest as of Jun 11th from download site), Mac OS X - Ubuntu Lucid

Please provide any additional information below.

I tried installing burg on my ubuntu computer. After following all the details 
and restarting my computer i get this:

Boot from CD/DVD :
GRUB loading.
error: no such device: <My Ubuntu Partition>
Entering rescue mode...
grub rescue>

Please help.

Hello, could change 4 lines, compile and update the application to not display 
the message "GRUB loading." when you start the computer.

"./boot/i386/pc/boot.S" line 382:
OLD -> notification_string: .asciz "GRUB "
NEW -> notification_string: .asciz ""

"./boot/i386/pc/diskboot.S" line 323:
OLD -> notification_string: .asciz "loading"
NEW -> notification_string: .asciz ""

"./boot/i386/pc/diskboot.S" line 325:
OLD -> notification_step: .asciz "."
NEW -> notification_step: .asciz ""

"./boot/i386/pc/diskboot.S" line 326:
OLD -> notification_done: .asciz "\r\n"
NEW -> notification_done: .asciz ""

Thanks. (Sorry my English-Google)

What steps will reproduce the problem?
1. add entries to grub's menu.lst
2. run sudo update-grub in terminal
3. run sudo update-burg in terminal

What is the expected output? What do you see instead?
the operating systems of the sora theme do not change. it should have the 
modified operating systems listed

What version of the product are you using? On what operating system?
the most recent version from your site as of 5-18-10. ubuntu 9.04

Please provide any additional information below.

i have osx86, windows 7, windows xp, and ubuntu installed in that order on 
a 500gb partitioned hard drive. i have the ubuntu partition active. i have 
add the entries correctly into grub's menu.lst and saved it with no errors. 
i have done the update-grub and update-burg and no changes have been made. 
it has the default 4 entries for ubuntu when i have an entry set up in 
grubs menu.lst file please help me update the operating systems.

I tried using the key r on boot and the max resolution it lets me its 1024x768

Is there a way to force resolution?

What steps will reproduce the problem?
1. When burg is properly installed, the themes all display properly and all 
operating systems are selectable
2. I have an ATI Radeon HD 5470 card with fglrx drivers and they boot fine with 
grub
3. When burg tries to boot it says fail (boot backup graphics card)?

What is the expected output? What do you see instead?
I expected it to boot into ubuntu like grub does.


What version of the product are you using? On what operating system?
I installed burg through the terminal and am running it on a sony vaio, dual 
booted with windows 7 and Ubuntu 12.04


Please provide any additional information below.
When I select to boot into Ubuntu burg acts like it is working but then just 
displays a blank screen with a cursor blinking. Do I need to just change 
something in the config file to make it be able to recognize my graphics card 
like grub does? I have fglrx and drivers installed to BTC mine.

What steps will reproduce the problem?
1.
2.
3.

What is the expected output? What do you see instead?
Normal burg gui to select the os

What version of the product are you using? On what operating system?
latest ubuntu 10.04

Please provide any additional information below.
on startus where is suppose to display the gui to select the OS. monitor is 
displaying that it cannot pickup the frequency (Hz ??) but bury is running at 
backgound. 

What steps will reproduce the problem?
I'm using a iMac, and burg not support my resolution. (1920x1200)
Please add it, thanks.

What steps will reproduce the problem?
1.  i have slow rendering when i move cursor between buttons
2.
3.

What is the expected output? What do you see instead?
fast smooth render

What version of the product are you using? On what operating system?

1.98+20100623-1

Please provide any additional information below.

i have Asus g51jx laptop and nvidia 360m gts graphic card.
theme: radiance

I've used Burg for nearly 4 years, and just hope to continue this project. 
Hence, I clone the whole code repository to GitHub. I'm hoping for someone 
going on with me.

Here is the new repo: http://git.io/bur or https://github.com/Firef0x/burg

What steps will reproduce the problem?
1. Set grub_default to 4(which is windows in my case)
2. update-burg
3. reboot or run burg-emu

What is the expected output? What do you see instead?
 Windows is default when burg is unfolded, but ubuntu(first entry) is default when toggle to fold, windows is default again if i toggle back

What version of the product are you using? On what operating system?
burg-emu -V: 1.98+20100623-1
Ubuntu 10.04 32bit

Please provide any additional information below.

What steps will reproduce the problem?
1. Clean install of debian 7 'wheezy'
2. Follow instructions from manual install at 
http://code.google.com/p/burg/wiki/ManualInstall
3. At step compile and install after the # make it throws an error.

What is the expected output? What do you see instead?
It should compilate... instead it throws this error:

/root/burg/commands/usbtest.c: In function ‘usb_print_str’:
/root/burg/commands/usbtest.c:115:19: error: ‘name’ may be used 
uninitialized in this function [-Werror=maybe-uninitialized]
cc1: all warnings being treated as errors


What version of the product are you using? On what operating system?

Debian Wheezy

What steps will reproduce the problem?
1. Install BURG
2. Reboot
3.

What is the expected output? What do you see instead?
The Plymouth splash screen is not showing. Instead, boot console output
appears.

What version of the product are you using? On what operating system?
Lastest version of Burg on 26 May, 2010, running on Ubuntu 10.04 Lucid 64b.

Please provide any additional information below.
I'd the problem from the first time I reboot after install. Logoff splash
screen (also from plymouth, I think), is not showing too.

my OS is fedora ,how to install BURG like on ubuntu installed

What steps will reproduce the problem?
1. i installed it as instructed in most of the website
2.
3.

What is the expected output? What do you see instead?


What version of the product are you using? On what operating system?
vesion 1.0.0 and i am using linux netbook and windows 7

Please provide any additional information below.
i`ve been trying for quite a few times.. using terminal download straight away. 
i dont know may be i made something wrong

What steps will reproduce the problem?
1.Open Super-Boot-Manager,Burg-Manager,Themes,Select Vitruvio,Apply Changes
2.Select Burg-Installer then Burg-Emu and Default Theme displayed
3.Close Burg-Manager,Super-Boot-Manager,and Reboot. 

What is the expected output? What do you see instead?
Expect Vitruvio Boot list displayed at Boot,but Default Boot list displayed.

What version of the product are you using? On what operating system?
Version 0.7.15 on Ubuntu 12.04-13.04

Please provide any additional information below.
Have tried remedying problem on Gnome 3.6.0, 3.8.0 and Unity 7.0.

What steps will reproduce the problem?
1. install burg
2. reboot
3.

What is the expected output? What do you see instead?
i saw a grub rescue prompt

What version of the product are you using? On what operating system?
i am dual booting xp and 10.4 via wubi maybe thats why?

Please provide any additional information below.

What steps will reproduce the problem?
1. Wait for BURG menu
2. Look at Ubuntu's icon

What is the expected output? What do you see instead?
You'd expect to see ubuntu's new icon for lucid, which is anyway much better 
than older icons and should also be used for older versions of ubuntu.

What version of the product are you using? On what operating system?
BURG64.efi with latest theme pack as of today (Jun 11th)
Ubuntu Lucid Lynx 10.04

Please provide any additional information below.
I took the liberty of adapting distributor-logo.svg from ubuntu-mono-* for 
BURG. It comes with large and grey variants, and the small variant is just 
distributor-logo.svg.
You then should copy the pngs to (burg path)/themes/icons, and rename them to 
*_ubuntu.png

not wide screen in 1366x768

What steps will reproduce the problem?
1. Install Burg and themes  
2. Run sudo update-burg
3.

What is the expected output? What do you see instead?
GRUB sees FakeRaid (and memtest)
output of update-grub:
Generating grub.cfg ...
Found linux image: /boot/vmlinuz-2.6.35-24-generic
Found initrd image: /boot/initrd.img-2.6.35-24-generic
Found memtest86+ image: /boot/memtest86+.bin
Found Windows 7 (loader) on /dev/mapper/via_bhejggidfc1
done

the Windows 7 boot entry looks like this:
insmod part_ms_dos
insmod ntfs
set root = '(/dev/mapper/via_bhejggidfc, msdos1)'
search --no-floppy --fs-uuid --set <uuid sting here>
chainloader +1

BURG does not
output of update-burg:
Generating burg.cfg ...
Found linux image: /boot/vmlinuz-2.6.35-24-generic
Found initrd image: /boot/initrd.img-2.6.35-24-generic
Found Windows 7 (loader) on /dev/mapper/via_bhejggidfc1
/usr/sbin/burg-probe: error: cannot find a GRUB drive for 
/dev/mapper/via_bhejggidfc1.  Check your device.map.

also, the windows 7 boot information gets reduced to:
chainloader +1

What version of the product are you using? On what operating system?
Ubuntu 10.10 x64 (single drive ext4)
Windows 7 (Via vt8237 FakeRaid, multiple partitions)

Please provide any additional information below.
GRUB version 1.98+20100804-5ubuntu3 has no problem with fakeraid
Please note that I am not trying to install GRUB or BURG on a fakeraid, only 
trying to get it to recognize it and add it to the list without manually having 
to edit the boot command every time I install a new BURG theme. Was there a 
recent GRUB patch/code change that could be ported to BURG? It seems as there 
was an issue like this with GRUB that was fixed in the past year. Also, I 
should point out that the fakeraid partitions are fully accessible in Linux, so 
there is no issue with misconfiguration that I am aware of.

What steps will reproduce the problem?
1. folded mode do not hide windows vista recovery partition
2. folded mode show only the last linux kernel


What is the expected output? What do you see instead?
Should be fine if item shown/hidden in folded mode would be edited by the user


What version of the product are you using? On what operating system?
1.98+20100623

Please provide any additional information below.

with the recent versions  of Ubuntu (Karmic onwards)you can add a repository 
and public key faster with a single command:

sudo add-apt-repository ppa:bean123ch/burg/ubuntu

What steps will reproduce the problem?
1.  i have slow rendering when i move cursor between buttons
2.
3.

What is the expected output? What do you see instead?
fast smooth render

What version of the product are you using? On what operating system?

1.98+20100623-1

Please provide any additional information below.

i have Asus g51jx laptop and nvidia 360m gts graphic card.
theme: radiance

What steps will reproduce the problem?
1. sudo editor etc/default/burg
2.
3.

What is the expected output? What do you see instead?
I used to be able to edit burg but not it gives me a blank nano screen

What version of the product are you using? On what operating system?
most up to date burg, ubunto 11.10

Please provide any additional information below.

What steps will reproduce the problem?
1. Place  --group group_osx at the end of each menuentry "Mac OS X in burg.cfg
2. Select the group, or a member of the group (with f7)

What is the expected output? What do you see instead?
Expect to boot into OSX, as it does when the group tag isn't present.  Instead, 
screen freezes.

What version of the product are you using? On what operating system?
Installed via Ubuntu.  Triple booting Ubuntu 10.10, Win 7, OSX.
burg package, 1.98+20100623-1+maverick

Please provide any additional information below.

Hello, everyone.

      As a fork project of GRUB, BURG can simply make use of the translation of GRUB from Translation Project. I'm just working on translating it. Anyone who is interested in translating BURG in any language, feel free to join me in.
     Here's my repo: https://github.com/Firef0x/burg.

What steps will reproduce the problem?
1. 800x600 its horrible for mini-lap standard displays
2.
3.

What is the expected output? What do you see instead?
Please added support 

What version of the product are you using? On what operating system?
The mist recent in ubuntu 10.04 and windows 7 pro

Please provide any additional information below.

What steps will reproduce the problem?
1. well. just reboot

What is the expected output? What do you see instead?
i would probably get to see the choices for the OSes
instead, i get the window with the choice AND another window in front of 
that one showing nothing at all, having the same title as the wanted one 
("select operating system")

What version of the product are you using? On what operating system?
i'm on ubuntu karmic 64bit(both of the following computers), and i have 
used the latest version of the theme (and burg) on one computer and the 
latest version of burg and the previous version of the theme on another 
computer.
both have the same problem

Please provide any additional information below.
eh...nothing to add here , i think. if you need anything else, ask me

Burg not booting my windows 7 while in graphical mode.
But if we press Q to go in cosole mode and E do edit the
commands and next control+x, it boot. Note: Nothing was changed
while in edit mode, just E and ctrl+x -> boots. Weird.

Lattest burg version. Any theme. Windows 7 - 7600.

Disk Layout

1 - Windows 7 - ntfs
2 - Sec disk - ntfs
3 - Extended
4 - Swap part
5 - Mint Linux - ext4
6 - Slackware - reiser

Please. I would like to post in forum.

What steps will reproduce the problem?
1. Select an ISO to boot from and click "add menu entry".
2. Apply changes and reboot (just to confirm the ISO was added as a menu entry).
3. Select ISO of menu entry to reboot and click "Remove".

What is the expected output? What do you see instead?
The expected output is not to have the ISO as a menu entry anymore, but it is 
shown. Also, after clicking the "Remove" button the list with the previously 
added ISO menu entries should be updated.

What version of the product are you using? On what operating system?
Burg Manager 1.0.0 in Ubuntu 10.04LTS

What steps will reproduce the problem?
1. Shutdown (not restart) Linux
2. Turn on computer


What is the expected output? What do you see instead?
Burg automatically chooses Ubuntu, instead of letting me choose between Linux 
or Windows

What version of the product are you using? On what operating system?
Burg 1.98+20100623-1+maverick on Ubuntu 10.10

Please provide any additional information below.
This also happens when I hibernate, but I'd expect it to behave this way. If I 
choose to restart (instead of shutdown), on boot it lets me choose the OS as 
expected.

What steps will reproduce the problem?
1. i never used BURG before... i just installed BURG and reboot the PC
2. in the BURG menu it says press F1 F2 F3 to do this do that
--- like change theme, help etc
3. none of F1 F2 F3 work...... pressing these keys do NOTHING

What is the expected output? What do you see instead?
whatever the key description for F1 F2 F3 is given

What version of the product are you using? On what operating system?
burg-pc 1.98+20100623-1+maveric(natty)

Please provide any additional information below.
got to know about BURG and followed instructions from 
http://www.omgubuntu.co.uk/2011/05/beautiful-burg-boot-loader-gets-ubuntu-11-04-
ppa/
inserted sudo burg-install “(hd0)” in the linux command line text field 
when asked for during installation

What steps will reproduce the problem?
1. bootdisk formatted as BTRFS
2. sudo update-burg
3. /usr/local/sbin/burg-probe: error: cannot find a device for / (is /dev 
mounted?).
4. GRUB happily stays where and as it is.....

What is the expected output? What do you see instead?
I expect to see Burg configured, instead I see:
/usr/local/sbin/burg-probe: error: cannot find a device for / (is /dev 
mounted?).


What version of the product are you using? On what operating system?
BURG:  current stable release
OS: Ubuntu Desktop 11.4 Natty Narwhal (last update this morning)


Please provide any additional information below.

I tried to install BURG in different scenarios.
* Laptop with Intel x64 CPU 
* Desktop with AMD x64 CPU 
Both two partitions (swap + \)  formatted as BTRFS

* existing installs (all the way upgraded from jaunty)
* brand new installs (Lucid+Natty)

After  reformatting as Ext4 I could install Burg2.
After  reformatting as BTRFS, no go!

In all these scenarios I had no issues with GRUB!
My inkling is that burg-probe is causing the issue.

What steps will reproduce the problem?
1. Download the BURG Src File
2. Resolve dependences : ruby , bison , automake , autoconf , etc
3. Compile using "./configure --with-platform=pc"
4. Install using "sudo burg-install /dev/sda"
5. Install using "sudo burg-mkconfig -o /boot/burg/burg.cfg"

What is the expected output? What do you see instead?
Generating burg.cfg ...
Found linux image: /boot/vmlinuz-2.6.24-27-generic
Found initrd image: /boot/initrd.img-2.6.24-27-generic
Found linux image: /boot/vmlinuz-2.6.24-26-generic
Found initrd image: /boot/initrd.img-2.6.24-26-generic


What version of the product are you using? On what operating system?
burg-src-20100326 on Ubuntu Hardy 8.04-4 32 Bits

Please provide any additional information below.
I wanna know , how to i can add my Windows XP to the BURG Menu plz ?

What steps will reproduce the problem?
1. I have a Scientific Linux
2. It is a "?" on the burg panel
3. I made "grey_sl.png""large_sl.png""small_sl.png" and put them in /icons and 
add "  -scientific { image = "$$/grey_sl.png" }"and the same words in "grey" 
and so on.

What is the expected output? What do you see instead?

The icon on the panel become which I made. Still the "?".

What version of the product are you using? On what operating system?

1.98+20100623-1  Ubuntu/Scientfic Linux/Windows 7

Please provide any additional information below.

My English is not good, wish you can read it.^_^

BURG lists all kernels installed, very long list...
it should have an option (like grub) to limitate to last N kernels. 

What steps will reproduce the problem?
1. Install Burg
2. Edit images as described in issue 7
3.

What is the expected output? What do you see instead?
I would expect to see the windows icon for my Windows 7 installation. Instead, 
I see the "Unknown" icon

What version of the product are you using? On what operating system?
Most recent, installed from repositories. On Ubuntu 10.04/Windows 7


Please provide any additional information below.
See attached screenshot.

I've seen some great screenshot of the BURG bootloader and tryed to install it 
myself via Fedora 18 following your instruction.
Anyway, i'm not having nice times with. Yesterday i just formatted four times 
my fedora partition .

I can setup burg without any problem following those instruction but when i 
reboot to give it a try it seems to not show my fedora partition.
The boot list just feature windows 7 (my secondo OS on this machine), windows 7 
Recovery, a strange "Linux x-..." and "Linux-... Recovery".
Selecting the Linux option i just get stucked in a command screen talking about 
"kernel panic - not syncing VFS".


anyone here installed burg via F18 correctly and can give me some suggestions?


thank you,
peppe

What steps will reproduce the problem?
1. Add passwords to burg-adduser
2. Switch to Sora theme
3. navigate to the 'Tools' menu and select Terminal

What is the expected output? What do you see instead?

It is expected that log in would be required to access the burg terminal, but 
instead access is granted without log in

What version of the product are you using? On what operating system?

burg(1.98+20100623-2.3) on Ubuntu 12.04.1

What steps will reproduce the problem?
1. Do not know
2.
3.

What is the expected output? What do you see instead?

Expected output is normal colors.

This is what I get when it's loading Ubuntu and the likes.
www.youtube.com/watch?v=8YaQzgygClM

Kind of reminds me of the bug that alot of people using windows get when 
they try to play old dos games without using dosbox.
Like so :
img337.imageshack.us/i/speixv0.png/

What version of the product are you using? On what operating system?

20100425-1 (lucid)
Ubuntu lucid lynx.

Please provide any additional information below.