gruijter / com.plugwise.smile Goto Github PK

Homey: 3.0.0, appversion 3.0.5

I tried to install a Plugwise P1 v3 smartmeter, but it failed because I entered a wrong ID.
You can alter the smile id and try again, but it fails again and the again, I am sure I used the right ID the second time and later.
A retry (with restart) of the installation wizzard succeeded. It fixed the problem for me.

Nothing urgent, I expected the app to either retry with newly entered smile ID or abort the installation.

Hoi Robin,
De app voor de smile p1 crashed constant sinds vandaag 31-1-22 onderstaand nr is van ingestuurd diagnostic rapport kun je mij vertellen wat er mis gaat en wat te doen

064c4b6b-cb4d-416f-8136-e3e606c9db42

Groet Erwin

Hi Robin,

Since this version 4.0.0, the MQTT hub does not receive any MQTT events from this app. The app itself seems to be working. I can see smart meter data being updated.

I am aware that this app is not the MQTT Hub app. But this app was updated in my Homey and now my MQTT dashboards don't update anymore.

I have updated all other apps. I have updates my node red and node red dashboards. I have updated all components on the dashboard. I can see other updates arriving from Homey, except for P1 data.

Would you be able to help investigate please?

Roger

Hi Robin. I have a request: Make the Ledring max. consumption configurable in flow action cards.

Instead of a fixed value, I want to set it dynamic with weekly peak power usage in flows.

Maybe the same for max. production? Not for me - i don't have solar panels - but i can imagine that others want to calculate a value based on sun-hours.

Hi,

I have bought the Plugwise Smile P1 and thought I could you it with Homey.
When I wanted to use the Plugwise Smile P1 I saw it is only available for the Homey Pro.
Could say if it will be available in the (near) future for Homey Bridge as well?

Best regard,

Michel Stroober
[email protected]

Beste Robin,
Is het mogelijk om de app beschikbaar te maken voor de Homey Bridge? Ik zou mijn plugwise graag op de Homey Bridge uit kunnen lezen.
Alvast dank voor de moeite.
Met vriendelijke groeten,
Jacco Larooij

Thank you for this good piece of work!

I've just bought a Plugwise Smile P1 device and they will install a new Smart meter (including a P1 port) in April in my house.

When I look trough the description and briefly through sourcecode, I do not see that the measurement for water usage is included.

To measure water (which is included in the project) the Obis reference are 0-n:24.1.0.255, 0-n:96.1.0.255, 0-n:24.2.1.255, where n is defined by the installation (see document Dutch Smart Meter Requirements v5.0.2 Final P1.docx from 26-02-2016). Perhaps I just missed it, but if it is not pressent, is it already included in the planning?

Kind regards
Rudi Tholen

Hi, I miss the data of the generated energy per meter rate. I want to see exactly how much energy we use and for this I need to increase the consumed energy with the generated energy to come to a total consumption. In the screen from the plugwise GUI i can see this information but i missed them in the APP in homey.
How can i read out the total consumption? From the inverter I can get the generated energy but part of it we use right away and the other part is delivered back so I can't just add this value up.
Can the generated energie information be added to the app?

The production values during high-tariff ("Productie piek") and low-tariff ("Productie dal") seem to be switched around. I'm seeing the latter value increasing during the day and vice versa.

Hi I have a socket hang up since some time now. The debug log file says every ~20 seconds:

• [managerdrivers] [smilep1][0] Poll error socket hang up
  The Smart meter app in the device list displays a red exclamation mark.
  The Smart meter details page says "Device is unavailable" and " socket hang up"

I'm on Homey 2.5.1 (2.5.0 had the same issue)
Plugwise P1 app version 3.0.3

Good day,

try to change the poll interval from 10 to 60 seconds but fails
send a log to you
version of app v2.0.3 - 13.03.18
Homey version 1.5.9

kind regards
René

See pictures 👍

While set max W to 8130
My lering gets solid bleu (not 1/2) from around 2000 - 2500 W

Hi,

The led ring (energy consumption) in the new Homey Pro doesn’t work (option not available in settings)

Unfortunately the new firmware which plugwise released for the plugwise P1 will not work with the Homey app anymore.

Firmware version: v3.3.5

You need to use their “plugwise home” (blue P app icon) app now as well. Instead of the dedicated plugwise app for the P1 (the brown yellow app icon).

So perhaps they combined that API. So that they can also use the plugs, adam, lisa and now also the P1 in the same app.

The "tarief" has stopped working for a few days. It remains low.

The ledring screensaver doesn't work anymore under v2. It still shows up in the list of screensavers, but when you select it the screensaver does not change.

After a reboot of my KPN Experia V10 router, the plugwise smile app in Homey gets disconnected and shows an error (socket hang up). A restart of the app in Homey does not solve the problem. The only way out that I found was to de-install the app and re-install the app again. Add my plugwise smile device again (and repair all flows with variables of the plugwise smile). Is there a way to prevent this from happening after a reboot of my router?

Homey cannot connect to the Plugwise P1 anymore. I tried rebooting Homey and the P1 but still I get the message “connect EHOSTREACH 192.168.0.185”.
The Plugwise app works like a charm and also Home assistant can connect to the P1.

I already created a diagn. Report.
155f3a8b-6554-4042-94df-fc163f9c638e

Br. Marcel

[log] 2022-02-10 19:27:46[smilep1] [Device:6565e615-c7ff-447f-b99a-ee9ec136bf1c] Error: meter_gas InvalidTypeError: undefined is undefined but expected number (invalid_type) at Remote Process meter_gas undefined
[log] 2022-02-10 19:27:36[smilep1] [Device:6565e615-c7ff-447f-b99a-ee9ec136bf1c] Error: meter_gas InvalidTypeError: undefined is undefined but expected number (invalid_type) at Remote Process meter_gas undefined

is shown in the log.

Hello, my P1 is not updating the gas meter ani more sinds 8-8

Can you help?
Gr Jeroen (NL)

Hi,

I found an issue when gas interval amount in one hour is less than 1m3 the difference calculation is incorrect. it rounds with Math.round() but then less than 1 (for example. 0.323 m3 per hour)
it will always return 0.

See line:

would be very nice for the gas bill when i stay every hour under 1 m3 🤣

HI Robin, thanks for the app.

Unfortunately I get a time out error and afterwards a comment that it could not find that pairsession.

I have plugged in the P1 in lan and the p1 and the plugwise home app works, however I can't seem to connect it to the homey. Do you know why? thanks in advance!
Kind regards
Peter

The P1 powerusage ledring screensaver cannot be found

I've send the log: b98fc893-9882-4451-9534-f78d74fd176b

Ik heb een verschil tussen Gasmeter in de app en de waarde die ik uitlees met mijn homey.
Ik zie het verschil alleen bij gasmeter. In de app 4455,74, in homey 4452,21

Ik heb in Homey de app al herstart, dat was geen oplossing.

The app crashes on opening card and gives the following stack trace:

`TypeError: Cannot read property '0' of undefined
at storeNewReadings (/drivers/smilep1/driver.js:380:66)
at /drivers/smilep1/driver.js:330:17
at Parser. (/node_modules/xml2js/lib/xml2js.js:484:18)
at emitOne (events.js:77:13)
at Parser.emit (events.js:169:7)
at Object.onclosetag (/node_modules/xml2js/lib/xml2js.js:445:26)
at emit (/node_modules/xml2js/node_modules/sax/lib/sax.js:640:35)
at emitNode (/node_modules/xml2js/node_modules/sax/lib/sax.js:645:5)
at closeTag (/node_modules/xml2js/node_modules/sax/lib/sax.js:905:7)
at Object.write (/node_modules/xml2js/node_modules/sax/lib/sax.js:1449:13)

Exit code: 1
Exit signal: null`