gruijter / com.gruijter.enelogic Goto Github PK

In the capabilities list of a youless device it always 'rounds' the values of m³/h and amperage, same when viewing the items on the insights webpage.

I only ever see full digit steps in amperage. Often being just 0 when not much power is being drawn. (A side note: it doesn't display a minus sign when PV is supplying the net)

As for m³/h it's been stuck at 0 for months, as it never exceeds 1.0. I know from my heater that it does exceed 0.5 on cold days so I assume any digit after the decimal point is omitted, not rounded.

Otherwise, love the app, works great. Thanks for making it!

Cheers,
Ralph

Hi, my "energy meter total" value is incorrect: the number displayed in the Homey app is a very large negative amount and moving up (towards zero).
Both "energy meter peak" and "energy meter off-peak" displayed in the app are correct, agree with the reading of my smart meter.
The smart meter doesn't have a reading for "total energy" (at least none shows up when I press the button on the smart meter)

Any way how to resolve this and display a correct value for "energy meter total"?

I have a YouLess LS120, my smart meter is SagemCom CS50

001

Thanks, Frank

beste ...

na de update van ongeveer 2 weken geleden werkt mijn app niet meer met de P1 device van enologic .
Hij geeft een foutmelding omdat hij geen gas waarden binnen krijgt.
Nu woon ik in almere en heb hier dus gen gas.
de foutmelding is:

error parsing gas information.

is hier wat aan te doen ?

Vandaag ook een update binnen gehad, maar ook nu de zelfde fout melding.

Aldo

error log
2018-12-27 17:04:18 [err] [ManagerDrivers] [LS110Water] Pair error Error: Info could not be retrieved from device at Youless.getInfo (/node_modules/youless/youless.js:185:11) at at process._tickCallback (internal/process/next_tick.js:189:7)
2018-12-27 17:04:18 [log] [ManagerDrivers] [LS110Water] save button pressed in frontend
2018-12-27 17:04:07 [err] [ManagerDrivers] [LS110] Pair error Error: Info could not be retrieved from device at Youless.getInfo (/node_modules/youless/youless.js:185:11) at at process._tickCallback (internal/process/next_tick.js:189:7)
2018-12-27 17:04:07 [log] [ManagerDrivers] [LS110] save button pressed in frontend

After the app was updated (to the new SDK?) my Homey lost its connection to the Eneogic P1 device.
I removed the device from Homey and tried to add it again but after choosing the Enelogic P1 device the installation proces shows the error "session.on is not a function" and stops.

Hi, i’m using the youless120 and it’s connected with a p1 connection.
Next to it i’ve installed your app on my homey but this app does not show any data. When i configure the ls120 E then it shows info. Can you please let me know what i can do to get data in the P1 app?

In the logging of your app i see these errors

Beste,

Onlangs Youless LS120 aangekocht en aangesloten op de P1 poort van men digitale teller. Fantastisch product en mooi inzicht van energieverbruik -opbrengst via de Youless app.
Zonet met Homey gekoppeld maar helaas Haalt deze dag en nachttarief door elkaar.. Youless app geeft het wel goed. Import 1 = dagtarief.. Import 2 = nachttarief. Idem met export.
Doe ik iets mis? Instelling verkeerd?

Alvast bedankt!

Mvg,
Stefan

Since a couple of days one of my YouLess is not reporting data to Homey. The youless that is reading mij water usage witch the optical sensor is not sending data.
The other is on the P1 port of the smart power meter, thisone is working great.
Homey 7.2.0
App version 4.0.0. (both experimental and def)

Hi, thanks for the great app.

I live in Belgium and watermeter data is also output by my LS120. It is visible in the MacOS app, but not on the IOS app.

It would be great to have watermeter data in your Homey app too! Can you add it?

Thanks very much Jasper

Can't connect Youless LS120-ELp1 because the keyboard screen will block save button. Also i can't disable gas button (because i have stadsverwarming)

Hi Robin,

i love the app, but im getting some strange results in the insights view (the spikes):

im using (the not supported) LS-110 with firmware 1.3.4-EL and the enelogic app v1.0.6

the enelogic cloud doenst show these spikes:

could you maybe look into this? the Youless homey app shows the same behavior.

Thanks in advance.

Marijn

Hello. I’m having a problem with my Youless LS120 P1 meter in Homey. I have 2 of them, each connected to its own HP2023. In 1 environment however the Youless keeps losing its 3-phase capabilities (Power, Current, Voltage). When I change a setting (for example polling interval by 1 second), then the device becomes unavailable saying “Migrating, please wait” and then after a minute or so it comes back with all of its capabilities. When I then check a few hours later, they are all gone again. Pretty frustrating…

Diagnostics report: 434f766b-02d4-4378-9bf8-236ba910c698

After changing a setting, the capabilities get back. Diagnostics report of that: 86faec79-c7a7-4cf2-b999-9a541a911be3

Homey Pro. Led ring screensaver from your app is broken since last update. I guess they changed something in the fix but broke your screensaver it seems.

Hi,

i got the following error:

"[err] 2022-02-01 12:18:07[Driver:LS110] Pair error Error: Info could not be retrieved from device at Youless.getInfo (/node_modules/youless/youless.js:200:11) at processTicksAndRejections (internal/process/task_queues.js:97:5) at async /drivers/LS110/driver.js:49:18
[log] 2022-02-01 12:18:07[Driver:LS110] save button pressed in frontend"

I am running youless ls110 with bg-tech.de firmware ( german frontend )

Modell: LS110
Firmware-Version: 1.2.0.DEbg

I am happy to provide additional information.

The LED ring does not work with the new homey.
Is it something I can fix myself?

The log says:
TypeError: this.animation.updateFrames is not a function at Ledring.change (/app/ledring.js:82:19

Hi!

After an upgrade to 2.0.3

Unfortunately, the app crashed while it tried to show the Enelogic power usage ledring screensaver.

This is the stack trace:

/drivers/enelogicp1/device.js:114
				};
				^
SyntaxError: missing ) after argument list
    at createScript (vm.js:74:10)
    at Object.runInThisContext (vm.js:116:10)
    at Module._compile (module.js:537:28)
    at Object.Module._extensions..js (module.js:584:10)
    at Module.load (module.js:507:32)
    at tryModuleLoad (module.js:470:12)
    at Function.Module._load (module.js:462:3)
    at Module.require (module.js:517:17)
    at Module.require (/opt/homey-client/system/manager/ManagerApps/bootstrap/sdk/v2/index.js:1:253)
    at require (internal/module.js:11:18)

I use the 110 with Pvouput software 1.2.2.-PO.
i cant use the youless

Thanks for your app, really like it.

Just a small thing, in the device card the actual gas usage stays on "-".
The actual gas usage is reported and triggered in flows, so it must be a small cosmetic update to have it correctly shown in the device card.

Regards,
Jeroen

Hi, I want to use one youless for connection to P1 and for connection with Solar panel via S0-pulses. In Homey I add a LS120-P1-> okay. When I add a LS120-S0 on the same ip-address, I get an error. What can I do?

Would be nice to include the S0 input in the P1 configuration. So one device with both P1 info and S0 info from a selectable device (eg solar panel or water meter).
I have now an old Homewizard Energylink on the Homey with the same capabilities. In one app the P1 info and S0 solarpanel info. Also a nett power consumption (power from grid plus power from PV). Very nice option.

It hung on the last measurement. I removed the devce and re-added it, but that does not help.

Logging:
2023-12-03T19:30:34.026Z [err][Driver:LS120] [Device:7df66e1c-b135-498a-87f7-38c6965b9bdf] Error: Page Not found
at Youless._makeRequest (/node_modules/youless/youless.js:741:11)
at processTicksAndRejections (node:internal/process/task_queues:96:5)
at async Youless.getP1Status (/node_modules/youless/youless.js:317:19)
at async LS120Device.migrate (/drivers/LS120/device.js:119:21)
at async LS120Device.onInit (/drivers/LS120/device.js:64:24)
at async LS120Device._onInit (/opt/homey-client/system/manager/ManagerApps/AppProcess/node_modules/@athombv/homey-apps-sdk-v3/lib/Device.js:1:1682)

2023-12-03T19:30:34.023Z [err][Driver:LS120] [Device:7df66e1c-b135-498a-87f7-38c6965b9bdf] Migration failed Error: Page Not found
at Youless._makeRequest (/node_modules/youless/youless.js:741:11)
at processTicksAndRejections (node:internal/process/task_queues:96:5)
at async Youless.getP1Status (/node_modules/youless/youless.js:317:19)
at async LS120Device.migrate (/drivers/LS120/device.js:119:21)
at async LS120Device.onInit (/drivers/LS120/device.js:64:24)
at async LS120Device._onInit (/opt/homey-client/system/manager/ManagerApps/AppProcess/node_modules/@athombv/homey-apps-sdk-v3/lib/Device.js:1:1682)

2023-12-03T19:30:29.002Z [log][Driver:LS120] [Device:7df66e1c-b135-498a-87f7-38c6965b9bdf] checking migration for LS120P1_192.168.1.111

2023-12-03T19:30:29.001Z [log][Driver:LS120] [Device:7df66e1c-b135-498a-87f7-38c6965b9bdf] device init: LS120P1_192.168.1.111 id: LS120P1_72:b8:a:14:26:a9

2023-12-03T19:30:20.621Z [err][Driver:LS120] Error: Page Not found
at Youless._makeRequest (/node_modules/youless/youless.js:741:11)
at processTicksAndRejections (node:internal/process/task_queues:96:5)
at async Youless.getP1Status (/node_modules/youless/youless.js:317:19)
at async /drivers/LS120/driver.js:98:22

Could i be that this only works with another firmware on my youless? I'm running 1.4.1-EL right now.

Added a newly bought Youless 120 P1 meter. Installed via P1 port and is operational (firmware 1.4.1-PO).

After succesfully adding on Homey (1.5.12) the readings are fine. After a couple of minutes i see the following exception in the devices overview:

No special settings.

I'm running the following setup:

• Homey firmware 2.0.4
• Enelogic app version 2.4.0
• Homey (Android) app version 2.0.8.257

And added two devices:

• LS120 P1
• LS120 Water

The latter has the following settings :

• No password
• polling interval 350 ms
• 1000 pulses per m3
• Automatic calibration true
• Log raw sensor data true (not sure I need this)

Both devices seem to work properly.
And have the log of this app show the following lines every two seconds :
2019-02-27 22:14:32 [err] [ManagerDrivers] [LS110Water] [0] { Error: log_not_found at Object.JSON.parse (/opt/homey-client/system/helpers/jsonfns.js:1:1190) at JSON.parse () at jsonToObject (/opt/homey-client/system/helpers/jsonfns.js:1:1083) at function.e.data.map.e (/opt/homey-client/system/manager/ManagerApps/bootstrap/sdk/v2/lib/HomeyClient.js:1:1379) at Array.map () at HomeyClient._onMessage (/opt/homey-client/system/manager/ManagerApps/bootstrap/sdk/v2/lib/HomeyClient.js:1:1372) at emitTwo (events.js:126:13) at process.emit (events.js:214:7) at emit (internal/child_process.js:762:12) at _combinedTickCallback (internal/process/next_tick.js:142:11) message: ‘log_not_found’, code: 404 }

Cumulative and solar options cannot exist together. Change to enum and add explanation.

Hey Guys,

this is my first Issue, nice to meet you all. I today received my Homey Pro early 2023 and - amongst others - instaled the youless app. Pairing as P1 with both of my youless ls120 was possible without issues. But seconds after having paired the devices, the status changed to „no connection“. Has anyone an idea what can be the cause of this? None of the other devices (hue, Shelly, tv) showed such a behavior.

It would be great if anyone managed to operate the devices with homey 2023.

Thanks in advance

Andi

Don’t know if this is normal but just noticed it.

2019-01-21 19:59:08 [err] [ManagerDrivers] [LS110] [0] Parse Error

Without password the device is added succesfull but with password the above error.
Youless firmware: 1.2.2-EL
Homey 2.0

https://community.athom.com/t/app-youless-and-enelogic-dutch-smart-meter-reader/4235/50

V2 firmware

The current version (v.2.0.5) does not recognize my Enelogic P1-reader anymore when I try to add the device. Message "No valid Enelogic information found".

Zoals besproken werkt de ledring niet meer met mijn enelogic p1 meter uitlezer.
Je had aangegeven dat deze momenteel niet vertegenwoordigd werdt in de app en dat je deze weer zal toevoegen.

Alvast mijn dank

Aldo Tromp

Hi Robin,

Is it possible to get the data from the old app to the new one? And if yes how?

Regards,

Barry.

I use 7 youless LS110/LS120 but I only can install 1 youless. On my former homey that wasnt a problem. What do I wrong?