gordonb3 / bubbagen Goto Github PK

Hi,
I get the following when I try to connect via ssh:
ssh root@b3
The authenticity of host 'b3 (192.168.1.223)' can't be established.
ECDSA key fingerprint is SHA256:kWtiP1wAUSn4a5y/8JmsfWEV9g1Mx5SnZ8602r/CGt0.
Are you sure you want to continue connecting (yes/no/[fingerprint])? yes
Warning: Permanently added 'b3,192.168.1.223' (ECDSA) to the list of known hosts.
Connection closed by 192.168.1.223 port 22

also there is no webserver running as you can see with the output from nmap

nmap -APn 192.168.1.223  255
Starting Nmap 7.80 ( https://nmap.org ) at 2020-03-25 10:45 EDT
Nmap scan report for b3.mozgwar.com (192.168.1.223)
Host is up (0.00082s latency).
Not shown: 999 filtered ports
PORT STATE SERVICE VERSION
22/tcp open ssh OpenSSH 8.0 (protocol 2.0)
| ssh-hostkey:
| 3072 ff:ea:49:a4:54:0b:ae:8b:1a:43:54:7d:40:d0:b7:b7 (RSA)
| 256 7b:03:5a:51:db:e6:e7:bf:cf:3f:91:82:7b:8b:ed:93 (ECDSA)
|_ 256 fd:1a:47:50:55:80:05:9c:02:a0:f5:03:f8:42:7a:bd (ED25519)

Service detection performed. Please report any incorrect results at https://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 13.86 seconds

I have installed a 2TB Wester Digital WDGreen harddisk. USB key boot, I log on via putty and run the install_to_sda.sh. Disk get the right partitions and complete the install

Any other entry quits without installing: INSTALL
Installing: check '/var/log/gentoo_install.log' in case of errors
Step 1 of 5: creating new "dos" partition table on /dev/sda...
Step 2 of 5: formatting partitions on /dev/sda...
Step 3 of 5: mounting boot and root partitions from /dev/sda...
Step 4 of 5: copying system and bootfiles (please be patient)...
grep: /boot.ini: No such file or directory
grep: /boot.ini: No such file or directory
Step 5 of 5: syncing filesystems and unmounting...

But it will not boot from harddisk. Any advise? Thanks , Jakob