google-code-export / iphodroid Goto Github PK
View Code? Open in Web Editor NEWAutomatically exported from code.google.com/p/iphodroid
Automatically exported from code.google.com/p/iphodroid
What steps will reproduce the problem?
1. Run 3G install works fine
2. Put phone into scroll mode no problem
3. Once scroll mode starts it freezes at open iboot text
What is the expected output? What do you see instead?
Phone should show open iboot then 0.6 "text". Instead: The scroll mode freezes
once the open iboot text is seen.
What version of the product are you using? On what operating system?
Beta 0.6 R7. VMware Mac os x 10.6.3
Please provide any additional information below
I have never seen the amazing ANDROID text when it boots to the iPhone!!
Original issue reported on code.google.com by [email protected]
on 9 Jun 2010 at 4:16
What steps will reproduce the problem?
1.Test with R12 on jailbreak iphone 3g, runnin' well
2.Network's fine but no mount SDcard (show me the tut to creat sd image???),
the battery seems unable to recharging (the bat. level run to 30% and back to
23% continuously)
3.Finally, in openiboot, choose iphone os and surprisingly it can not boot into
IOS anymore (different than earlier releases); then I decide to restore my IP
by original ios 4 firmware also to recover the partition created by R11 as
well. Restoration's successful but the iphone space as informed is 6.90 GB not
>7GB like normal.
What is the expected output? What do you see instead?
Please show me the tut to resize my iphone partition to original state
What version of the product are you using? On what operating system?
Iphone 3G 4.0, jailbreak by redsn0w. Windows 7 Ultimate and MacOX on VMware
Original issue reported on code.google.com by [email protected]
on 5 Jul 2010 at 11:51
What steps will reproduce the problem?
1. Own a first generation device
2. Try
What is the expected output? What do you see instead?
Everything goes well until openiboot when it wont go in scroll mode
What version of the product are you using? On what operating system?
iPhodroid 0.5 R1-0.6 R5, iOS 3.1.2 on iPhone 2G/1st gen.
Original issue reported on code.google.com by [email protected]
on 8 Jun 2010 at 1:06
What steps will reproduce the problem?
1.running iphodroid
2.menu
3.Dev tools
What is the expected output? What do you see instead?
dev tool crashes and never loads i have tried several times and its the same
thing, i would have to hard reboot the hardware.
What version of the product are you using? On what operating system?
i am using r12b on mac os x 10.6.4
Please provide any additional information below.
i got android froyo to work with making calls and recieve calls and text and
wifi is working great and market place for would be great. also the usb sync
doesnt work, touch screen is a little buggie but working, looking foward to
next update.
Original issue reported on code.google.com by [email protected]
on 7 Jul 2010 at 4:58
What steps will reproduce the problem?
1. Slide to unlock..
2.
3.
What version of the product are you using? On what operating system?
R12c
Please provide any additional information below.
I get several errors upon boot, and the last one i keep getting is this:
Sorry! The application LauncherPro (process andriod.process.acore) has stopped
unexpectedly. Please try again.
Original issue reported on code.google.com by [email protected]
on 12 Jul 2010 at 11:47
What steps will reproduce the problem?
1. Installed rc 9
2.
3.
What is the expected output? What do you see instead?
Fast scrolling screen
What version of the product are you using? On what operating system?
Rc9 on 3.1.2 3g jb with blackrain
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 12 Jun 2010 at 8:57
What steps will reproduce the problem?
1.flash iphone with 3.1.2
2.then jb with redsnow
So the blackrain jb was the culprit.
Original issue reported on code.google.com by [email protected]
on 13 Jun 2010 at 8:03
What steps will reproduce the problem?
1. settings, wifi, scan
2.
3.
What is the expected output? What do you see instead?
I expect to see my wifi networks instead I see unable to scan
What version of the product are you using? On what operating system?
0.6 r12
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 12 Jul 2010 at 5:43
What steps will reproduce the problem?
1.Install android
2.unclean shutdown
3.
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
Please provide any additional information below.
Hey, I have been playing around with installing android for a few days on my
iphone and I have run into an issue. Once I got android completely installed, I
noticed I couldn't open the terminal emulator without it crashing. This kept me
from doing a clean shutdown (su, reboot). The problem is, right after that,
everytime I boot into either the console, or android (which I uninstalled) in
openiboot it scans the FTL for like 30 minutes. I also noticed, this apparently
keeps me from doing a restore/update on IOS to restore things to normal (error
28)
I have a backup of my NOR that I took before all of this started, and I have
restored to it, but the problem persists with the error 28. Even after
installing a fresh copy of openiboot, with no android, I still have the issue
of the phone scanning the FTL virtual blocks.
I have attached a text document of the bootlog (dmsg).
Original issue reported on code.google.com by [email protected]
on 8 Jul 2010 at 8:58
Attachments:
What steps will reproduce the problem?
At the end, when Android is Booting
What is the expected output? What do you see instead?
Infinite Fast downScrolling can't read about the problem
What version of the product are you using? On what operating system?
IphoDroid 0.6 R6
Please provide any additional information below.
iPhone 3G 8gb Ver. 3.1.2 w/ Blackra1n
Original issue reported on code.google.com by [email protected]
on 7 Jun 2010 at 8:59
What steps will reproduce the problem?
1. Running iphodroid
What is the expected output? What do you see instead?
Android installed without known_hosts being deleted.
What version of the product are you using? On what operating system?
I have tried R11, and R10.
Please provide any additional information below.
It would be better to either copy/move before installation, then restore.
Or parse the file and delete the line for the IP/host of the iPhone.
Original issue reported on code.google.com by [email protected]
on 28 Jun 2010 at 7:18
What steps will reproduce the problem?
1. Install iphodroid r12 that uses partition for ios4
2. Restore phone normally with ios4 general release
3.
What is the expected output? What do you see instead?
Phone acted as if it restored normally but now wifi does not work. It searches
and searches but can not find access point even if in front of router. Also
after restore file capacity of iphone in itunes is 6.90 GB.
What version of the product are you using? On what operating system?
R12 with partition on Mac OSX on iphone 3g ios4
Please provide any additional information below.
i have tried restoring my phone in DFU mode and regular restore no luck. Also
tried downgrading to 3.1.3 no luck. Back on ios 4 now jailbroken with redsnow
trying to find a fix.
Original issue reported on code.google.com by [email protected]
on 7 Jul 2010 at 7:46
What steps will reproduce the problem?
1. Start install, get to step 9
2.Macfuse error (ERROR on MACFUSE routine)
3.I
What is the expected output? What do you see instead?
scp -C [email protected]:zephyr2.bin
'/Applications//iPhoDroid.app'/Contents/Resources/firmware/
[email protected]'s password:
zephyr2.bin
----
What version of the product are you using? On what operating system?
r6
Please provide any additional information below.
Hackintosh 10.6.3, Core i7 Gigabyte x58a-UD7.
Screen cap attached below.
Original issue reported on code.google.com by [email protected]
on 7 Jun 2010 at 9:57
Attachments:
What steps will reproduce the problem?
1.Install iphodroid r12
2.run setup
3.crashes after "flashing" a couple things.
What is the expected output? What do you see instead?
Wanted droid to install/ boot. Crashes back to boot screen.
Expected android to boot.
What version of the product are you using? On what operating system?
Iphodroid r12. iPhone 3.1.2 jailbroken with blackrain.
Tried r11 didn't work. Installed iphodroid with a virtual mahine. mac os x
leopard
any help would be great.
Original issue reported on code.google.com by [email protected]
on 9 Jul 2010 at 5:43
What steps will reproduce the problem?
1.Run after open iboot is completed
2.Select adroid from iboot
3.Scrolling text
What is the expected output? What do you see instead?
Linux Penguin. Text freezes at radio: reading baseband nvram... done
I HAVE LEFT IT SITTING FOR 2 HOURS AND NOTHING HAPPENS
What version of the product are you using? On what operating system?
0.6 R10 and i tried 0.6 R9
Please provide any additional information below.
I HAVEN'T GOTTEN THIS TO WORK EVEN ONCE! I WANT THIS TO WORK FOR ME!!!
Original issue reported on code.google.com by [email protected]
on 21 Jun 2010 at 2:58
Attachments:
What version of the product are you using? On what operating system?
0.6beta R10 on 3.1.2
Please provide any additional information below.
iphone 2G, redsnow 0.9.4
i get the message successfully installed but on the iphone stays the
screenwhere he checks the last sectors. Then i Power- Homebutton - restarted it
but it boots directly to Apple OS...
Original issue reported on code.google.com by [email protected]
on 18 Jun 2010 at 5:26
What steps will reproduce the problem?
1. Booting into iDroid
2.
3.
What is the expected output? What do you see instead?
I get really fast text that I cannot read, but before this happens i see a
couple notable lines of code,
Warning Failed to initalize console,
ffly_sync end
ffly_sync end
Filesystem safely unmouted.
What version of the product are you using? On what operating system?
iPhone 3G 3.1.2 JAILBROKEN with BlackRa1n
iMac 10.5.7
IPHODROID 0.6 R8
Please provide any additional information below.
The text is scrolling extremely fast and is unreadable but the things i can
makeout are
request_void() Zephyry
Original issue reported on code.google.com by [email protected]
on 12 Jun 2010 at 4:02
What steps will reproduce the problem?
1. Power on and select "iDroid"
2. Begins to boot- scrolling text.
3. Hangs with "Welcome to OPENIBOOT" text at bottom of screen.
What is the expected output? What do you see instead?
Expected it to launch iDroid.
What version of the product are you using? On what operating system?
iOS4, iPhodroid 0.6 r11, JB iPhone 3G with PWNAGE 4.0 and yellowsn0w
Please provide any additional information below.
See attached photo of screen...
Original issue reported on code.google.com by [email protected]
on 26 Jun 2010 at 5:10
Attachments:
What steps will reproduce the problem?
1.Setup normally
What is the expected output? What do you see instead?
My wifi networ. Instead nothing the other networks appear but mine doesn't
What version of the product are you using? On what operating system?
R12
Original issue reported on code.google.com by [email protected]
on 6 Jul 2010 at 1:09
What steps will reproduce the problem?
1. Boot Android
2.
3.
What is the expected output? What do you see instead?
I expect when touching the screen I would get some sort of feedback, but
nothing happens. I can't launch applications, I can't close popups, can't
bring up the menu. There is no response to touch.
What version of the product are you using? On what operating system?
IPHODROID 0.6 R10 on iPhone 2G 3.1.3 jailbroken/unlocked with PwnageTool 3.5.
Please provide any additional information below.
I am able to unlock the screen via the home button, and pushing the home button
brings up the Android menu once past the unlock screen, so I know the system is
not locking up. There's just no touch response.
Original issue reported on code.google.com by [email protected]
on 18 Jun 2010 at 2:28
What steps will reproduce the problem?
1. it always stops at "Welcome to OpeniBoot". The text right there is kind of
messed up, and it doesn't go any further.
2. I had tried 0.6 R6 and R7
What is the expected output? What do you see instead?
Please let me know the solution
What version of the product are you using? On what operating system?
Iphodroid 0.6 R7 with Iphone 3G 3.1.2 tested on Mac OS X (vmware image)
Original issue reported on code.google.com by [email protected]
on 8 Jun 2010 at 1:08
What steps will reproduce the problem?
1. Open the Program works, but after choosing the Device it will crash with a
Script error -4940
What is the expected output? What do you see instead?
That it dosent crash.
What version of the product are you using? On what operating system?
Latest R6
Please provide any additional information below.
iPhone 3G 3.1.3 with redsn0w Jailbreak.
Older Version worked well..
Original issue reported on code.google.com by [email protected]
on 7 Jun 2010 at 10:02
What steps will reproduce the problem?
1.Install iPhodroid 0.6 R10
2.Boot into android
3.no network service
What is the expected output? What do you see instead?
Connect to network carrier
What version of the product are you using? On what operating system?
Iphone 3g, iPhone OS 3.1.2, Blackrain and Blacksn0w
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 19 Jun 2010 at 5:59
What steps will reproduce the problem?
i installed the iphodroid but on run the screen stay looping
What version of the product are you using? On what operating system?
IOS 4.0 IPHODROID R12c
please Sergio help on this screen. Should i need to reinstall the iphodroid?
Original issue reported on code.google.com by [email protected]
on 13 Jul 2010 at 9:21
What steps will reproduce the problem?
1.Install Android with Iphodroid
2.Choose to install OpenIboot and backup NOR
3.Try to put into scrolling mode
What is the expected output? What do you see instead?
The device never enters scrolling mode. Instead, I see the apple logo flash
twice (one every 8 seconds or so) then it just sits at a black screen.
What version of the product are you using? On what operating system?
Iphodroid 0.6b as instructed by Redmondpie.com using OSX 10.5.6 and 3.1.2 IOS
with blackra1n jailbreak.
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 6 Jul 2010 at 9:11
What steps will reproduce the problem?
1.Starting android
2.
3.
What is the expected output? What do you see instead?
After install R10, it properly runs, starting android but the first dialog ask
for inserting SIM PIN Code enclosed with Answer and Dismiss button(don't
remember exactly), I chosen Dismiss then come to the main screen of Android;
then try with Network auto detection but the Automatic registration keeps on
running, and finally no network could be detected.
What version of the product are you using? On what operating system?
Iphone 3G (3.1.2) jailbreaked by blackra1n
Please provide any additional information below.
Give me the solution !!! I am so excited after R10 installed.
Original issue reported on code.google.com by [email protected]
on 17 Jun 2010 at 6:26
When i put my iphone in recovery mode and click go..the iphoDroid app simply
closes. Is this a problem on my or your end?
Original issue reported on code.google.com by [email protected]
on 13 Jul 2010 at 12:02
the issue im having is its a scroll line cannot set as speaker mixer LDSPK set
and it keeps on scrolling slowly, running IOS4 jailbroken and unlocked with
Redsn0w on a macbook pro 10.6.4
Original issue reported on code.google.com by [email protected]
on 5 Jul 2010 at 7:13
What steps will reproduce the problem?
1.boot into froyo
2.booted successfully
3.NO DATA CONNECTION
What is the expected output? What do you see instead?
I expect Data connection but only get calls.
What version of the product are you using? On what operating system?
iPhoDroid r12b on iPhone 3G jailbroken on iOS 4 with latest redsnow.
Please provide any additional information below.
I am also on AT&T and I have already configured the APN settings in the
settings menu but I still don't get a data connection. Is data over a network
connection not supported yet? I have also rebooted the phone various times to
see if that would solve the problem but it doesn't seem to do it.
Original issue reported on code.google.com by [email protected]
on 7 Jul 2010 at 5:12
What steps will reproduce the problem?
1.On OpenIBoot 0.1 R12 Select iPhone mode
2.iPhone doesn't boot and a white screen appears
What is the expected output? What do you see instead?
iPhone boot
What version of the product are you using? On what operating system?
Iphone 3G iOs 4 redsn0w jailbreak Last Baseband
Please provide any additional information below.
I've just perfomed and Install mode that chanes the iboot image. I've started
on Froyo Mode and later reboot into iPhone mode with no success.
:.: iPhone Broken :.:
Original issue reported on code.google.com by [email protected]
on 9 Jul 2010 at 1:39
What steps will reproduce the problem?
1.own a iPhone 2G
2.use iphodroid 0.6 R11
3.scroll mode
What is the expected output? What do you see instead?
Scroll mode come success but it stops at i2c: ack not received before byte 0.
and no welcome to openiboot text
What version of the product are you using? On what operating system?
iphodroid 0.6 R11 iPhone 2G Mac OS X Leopard 10.5.2(vmware image)
Original issue reported on code.google.com by [email protected]
on 4 Jul 2010 at 5:17
What steps will reproduce the problem?
1.
2.
3.
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 12 Jul 2010 at 9:59
What steps will reproduce the problem?
1.i run the program as prompted but i keep getting stuck in the connecting
cable to itunes screen.
2.
What is the expected output? What do you see instead?
instead of continuing with the process (install openiboot and backup nor) it
stops at the connect cable to itunes screen
What version of the product are you using? On what operating system?
iMac: Mac OS X 10.5.8, PPC, iPhone:iOS 3.1.2(7D11) PwnageTool and unlocked
using blacksn0w, Modem Firmware 05.11.07, iphodroid: 0.6 beta R7.
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 8 Jun 2010 at 10:23
What steps will reproduce the problem?
1. Installing OpeniBoot
2.
3.
What is the expected output? What do you see instead?
iPhone showing "welcome to openiboot"
iPhoDroid said "please put your phone into scroll mode"
What version of the product are you using? On what operating system?
iPhone 2G 3.1.3 Mac OSX10.6.4
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 27 Jun 2010 at 1:27
What steps will reproduce the problem?
1.Booting into iDroid
2.
3.
What is the expected output? What do you see instead?
radio: reading baseband nvram... done
it will stay like this until i force shut off.
What version of the product are you using? On what operating system?
iPhone 3G 3.1.2 JB with Redsn0w Baseband 5.11 Not unlocked.
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 14 Jun 2010 at 10:10
iPhone totally not working.... it is switched off... tried everythin
[home+power button for 10 secs] puttin to recovery mode.... wall
charger...all... well the prob. came like this...
i started off with installation of iphodroid and it installed all correctly....
using R12 and a mac.... i was on the iboot screen n tried to run my iOs 4 ...
it showed up the apple but then i white screen came... i was really frustrated
so wanted 2 uninstall froyo... n then as i went to mac n ran iphodroid... my
phones battery got to 0% and it switched off... first connected to laptop ...
dint work n thn wall charger n thn tried all combinations... dint work...
really wanna cry... :'(.... what to do NEED HELP ASAP....
Original issue reported on code.google.com by [email protected]
on 7 Jul 2010 at 3:29
What steps will reproduce the problem?
1. Have a terminal window open
2. Start iPhoDroid
3. Terminal.app get's killed
What is the expected output? What do you see instead?
iPhoDroid should leave my terminal.app alone and not kill other processes.
What version of the product are you using? On what operating system?
IPHODROID 0.6 Beta
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 13 Jun 2010 at 8:29
The SD Simulation has a problem....
R12
Original issue reported on code.google.com by [email protected]
on 6 Jul 2010 at 1:10
What steps will reproduce the problem?
1.Install R12
2. Run Install on Open Iboot
3. Load Froyo
What is the expected output? What do you see instead?
Froyo will load. But mine was stock on:
libertas: wlan0: Marvekk WLAN802.11 adapter
Warning: 'rild' uses 32-bit capabilities(legacy support in USB)
What version of the product are you using? On what operating system?
iOS 4 jailbroken using Redsnow. 3g w/ latest baseband
Original issue reported on code.google.com by [email protected]
on 6 Jul 2010 at 6:33
Still doesn't work with pwnage tool. My results from hours of testing: iPhone
2G doesn't work jailbroken with redsn0w, backra1n, or PWnage tool using v.0.5
R1 - v.0.6 R10. Please fix this bug, with this bug nothing works.
My specs:
iPhone 2G with version 3.1.2
Jailbreak: blackra1n, redsn0w, PWnage tool
Computer: PPC iMac G5 10.5.8 Leopard
Version: 0.5-0.6 R10
Problem: Everything works until I get to the Openiboot step where the iPhone
just goes into connect to itunes or a picture of Steve Jobs on PWnage tool.
Basically I can't get into scroll mode.
Solution: Don't try (I.E. doesn't have a solution yet)
Please fix this.
Original issue reported on code.google.com by [email protected]
on 20 Jun 2010 at 8:59
What steps will reproduce the problem?
1.install iDroid
2.go to apps
3.not find Marketplace
What is the expected output? What do you see instead?
The expected is that i can download apps and install them via marketplace or
some sort of equivilent.
I see no clear way to install apps in this instead
What version of the product are you using? On what operating system?
beta 0.6 R12
Please provide any additional information below.
This is truly incredible, I would just like to do more with it. Please try to
make this happen.
Original issue reported on code.google.com by [email protected]
on 5 Jul 2010 at 7:06
What steps will reproduce the problem?
1.the end
2.
3.
What is the expected output? What do you see instead?
when it is installed thouch screen is not working
What version of the product are you using? On what operating system?
iphodroid 0.6 beta R7
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 10 Jun 2010 at 9:14
Sergio these are some issues I'm having now inside of android.
1. Any sort of vibrations don't work i.e. Phone calls, Text messages, Typing,
etc.
2. Cant choose any other ringtones besides the ringing one. Also it only plays
once i.e. call the phone, phone registers as an incoming call, phone rings but
only one tone for one time instead of continuously ringing.
3. wifi issues. i cant connect to the wifi in my house but for some odd reason
i can connect to other peoples wifi around my house. but still cant connect to
the internet.
4. I had everything working on the phone. then i booted into android and it ran
all texts fine with no errors then showed the android boot logo then the screen
goes black but with the screen still on and stays that way. I uninstalled it
then reinstalled it and no problems at all. just wanted to let you know that it
happened.
I think thats it for now. Write back whenever you get the chance.
Original issue reported on code.google.com by [email protected]
on 26 Jun 2010 at 4:42
What steps will reproduce the problem?
1.
2.
3.
What is the expected output? What do you see instead?
infinite scrolling during first boot
What version of the product are you using? On what operating system?
beta 6
Please provide any additional information below.
Iphone 3g 16gb blackrain
Original issue reported on code.google.com by [email protected]
on 10 Jun 2010 at 4:56
What steps will reproduce the problem?
1. turning off my iPhone 3G
2. restart --> there's the default boot logo, there isn't the openiboot logo..
What is the expected output? What do you see instead?
the iPhone starts normal the iOS4
What version of the product are you using? On what operating system?
R12, Mac OS X 10.6.4 (iMac intel core 2 duo)
Please provide any additional information below.
-
Original issue reported on code.google.com by [email protected]
on 5 Jul 2010 at 7:38
What steps will reproduce the problem?
1.
2.
3.
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
IOS4, iPhodroid 0.6 R11, RedSn0w JB and UltraSn0w unlock
Please provide any additional information below.
Does iPhodroid work with other carriers as well, if it was software unlocked.
Or it will work only with AT&T
Original issue reported on code.google.com by [email protected]
on 24 Jun 2010 at 3:45
1. Connect iPhone 3G running firmware 4.0
2. Open iPhoDroid app.
I get error
Can't make «class cntr» of alias ":Directorywheretheappis:iPoDroid.app:" into
type text.
iPoDroid v. R11
Original issue reported on code.google.com by [email protected]
on 27 Jun 2010 at 10:19
What steps will reproduce the problem?
1.try and boot to driod
2.
3.
What is the expected output? What do you see instead?
fast scrolling text
What version of the product are you using? On what operating system?
.6 rc8
16 gig 3g 3.1.2 jailbroken blackrain
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 12 Jun 2010 at 2:49
when i run iPhodroid everything seems to go fine until it shows an outline of
0.6. it also keeps saying "USB state change: 1 -> 3" or 3 -> 4
R12, IOS4 Jailbroken with Redsn0w, OSX 10.6.3
Original issue reported on code.google.com by [email protected]
on 5 Jul 2010 at 6:36
What steps will reproduce the problem?
1.Booting into iDroid, from Open iBoot
2.
3.
What is the expected output? What do you see instead?
Android Booting.
It get's stuck at--
iPhone-multitouch iPhone-multitouch: firmware: requesting zephyr2.bin
libertas: unable to obtain helper firmware, trying again...
libertas_sdio mmc0:0001:1: firmware: requesting sd8686_helper.bin
zephyr2: couldn't get firmware. trying again...
And it loops, over and over.
What version of the product are you using? On what operating system?
iPhoDroid 0.6 R11. On iOS4
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 24 Jun 2010 at 11:12
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.