NordVPN Gateway is a tool which turns your server into a gateway where NordVPN connection is placed behind different channels, like standalone Shadowsocks, Outline and/or Cloudflare Zero Trust. It is useful when you cannot access NordVPN directly or do not have a stable connection, but you do love their great protection including hiding your IP address and other cool features.

There are three channels that can be used individually or jointly to access the gateway from your devices:

If your server has an ARM processor, you should not choose Outline as a channel during installation because vanilla Outline does not support ARM processors. Other channels work perfectly with ARM processors.

1. Make some preparations:

   1. Buy a subscription for NordVPN.
   2. Fulfill the requirements for one or several channels specified in the right column of the table above.
   3. Create a new server based on Ubuntu using DigitalOcean or another similar service.

2. Connect to the server via SSH and log in as root if needed:

   sudo --login

3. If you have no any possibility to reboot the server without SSH, it is strongly recommended to enable periodic reboot server because NordVPN may hang and block access to the server via SSH until reboot (this has happened a couple of times on ARM processors). For example, you can do it with a command below every Sunday at 12:00 AM:

   (crontab -l 2>/dev/null; echo "@weekly /usr/sbin/reboot --force --force >/dev/null 2>&1") | crontab -

4. Upgrade the server:

   apt update && apt upgrade -y

5. Configure the server and follow further instructions:

   bash -c "$(curl -sSL https://github.com/give-me/vpn/raw/master/install.sh)"

After following the instructions mentioned above, the channels configured by you will automatically start. After each rebooting the server, CRON automatically runs a script /opt/vpn-gateway/bin/gateway.sh which configures the server, connects VPN and checks health periodically. In case of connection loss, the script tries to reconnect VPN and reboots the server if tryings failed.

A file structure created by this tool during installation or using is as follows:

/
├── opt/
│   └── vpn-gateway/
│       ├── settings/         (a place to store channels' settings)
│       ├── data/             (a place to store channels' data)
│       └── bin/
│           ├── gateway.sh    (a task to start the gateway)
│           ├── reinstall.sh  (a task to reinstall this tool)
│           └── uninstall.sh  (a task to uninstall this tool)
└── var/
    └── log/
        └── vpn-gateway.log   (this tool logs events here)

Detailed scheme of traffic routing between your device and Internet for each of the channels is shown below:

flowchart LR;
    Y --Shadowsocks--> SC --Shadowsocks--> VC
    Y --Outline-->     OC --Outline-->     VC
    Y --Cloudflare-->  CN --Cloudflare-->  VN --Cloudflare--> VC --Cloudflare--> CC --Cloudflare--> VC

    VC --All the channels--> VN ---> I
    
    Y[Your device]
    VN[NordVPN network]
    CN[Cloudflare network]
    I[Internet]

    subgraph Your server
    SC[Shadowsocks container]
    OC[Outline container]
    CC[Cloudflared container]
    VC[NordVPN client]
    end

It is important to note that whereas Shadowsocks and Outline channels require the server to be publicly accessible to establish connections from your devices to the gateway, Cloudflare Zero Trust channel can work with any server, even a virtual server running locally and inaccessible from the outside.

Important events and useful recommendations for the cases of loosing authorization and other problems will be available in a log by running tail -f /var/log/vpn-gateway.log. Open ports using by this tool can be found by running ss --processes --listening --tcp.

In order to reconfigure the gateway without updating this tool, just run /opt/vpn-gateway/bin/reinstall.sh as root. In order to reconfigure the gateway with updating this tool to the latest version, just repeat the 2nd and 5th steps of the installation guide.

In order to uninstall this tool, just run /opt/vpn-gateway/bin/uninstall.sh as root. In this case, logging out from NordVPN is made with a command nordvpn logout instead of nordvpn logout --persist-token your token will expire regardless of which token you specified (expirable in 30 days or non-expirable).

Additionally, if Cloudflare Zero Trust was configured as a channel, you can delete unnecessary API Tokens created upon request of this tool and available here because Cloudflare set a limit of API Tokens.