frankie-zeng / ecubus Goto Github PK

在Ubuntu下面npm install报以下错误：

是不支持Linux吗？

the wireshark dump as below:

ECUBus send Request Diagnostic Session Control(0x10):
0000 00 e0 4c 68 01 d4 c8 e7 d8 ce bb dd 08 00 45 00
0010 00 36 0f d8 40 00 40 06 44 de c0 a8 32 b5 c0 a8
0020 32 06 b1 34 34 58 1b e4 3d a4 e8 76 5c ff 50 18
0030 40 23 61 71 00 00 02 fd 80 01 00 00 00 06 00 0d
0040 10 00 10 81

ECU response:
0000 c8 e7 d8 ce bb dd 00 e0 4c 68 01 d4 08 00 45 00
0010 00 35 b7 3b 40 00 40 06 9d 7b c0 a8 32 06 c0 a8
0020 32 b5 34 58 b1 34 e8 76 5c ff 1b e4 3d b2 50 18
0030 03 ec ab 1b 00 00 02 fd 80 03 00 00 00 05 10 00
0040 00 0d 03

I use the ECUBus send Diagnostic Session Control(0x10) defaultSession(0x01), data should be 0x1001,but wireshark dump is 0x1081

There are a few others I would like to continue to ask:

1. Can you provide 27 security algorithm calculation examples and 31 checksum calculation examples, or save a GROUP containing the above usage?
2. Can the sub-functions of the security algorithm be added, or how to modify the sub-functions that are not in the list?
3. How to insert other non-diagnostic messages into the process?
   thank you very much！

I found that UDS Over Ethernet does not support UDS 0x36 services, can it be supported?

如图所示，提示我输入不正确，但是DID就是两字节的hex值

There is no flow control frame 0x30

我现在用NPM 10.2.4版本，在npm install时，很多都安装不了。帮忙看看是不是版本不对？

只有菜单，无内容

0x31 RoutineControl
Routine identifiler shows fault all the time even if the routine identifier input is hex

为什么ECUBus中LIN诊断发送NAD和接收NAD不能相同？NXP SDK中的LIN Stack接收诊断帧和发送响应时NAD都是根据配置的NAD，我应该怎么修改使能可以支持SDK中的LIN Stack?谢谢！

Hello,

I would like to use this software to flash my own code; in other words, I would like to compile my own flash_api.bin and S32k144_app_CANFD.bin. I have searched the NXP forums and the documentation, but I could not find how I could do that.

Any help is appreciated!

如何选择不同的硬件驱动去刷写 ？

Vector 提供的有dll文件， 如何调用其中的接口以支持Vector CANcase进行刷写？

Do you accept contibutions? I had to apply some simple fixes before I could get the program running, I would like to push them up.

Hi,

i installed the software with the command in README i receive no error but when I open the application see white window with only Githun and version button

i am using visual studio 2017 and node 16

In file included from ../src/addons/can/peak/pcantp_napi.cpp:3:0:
../src/addons/can/peak/pcantp_napi.h:5:21: fatal error: windows.h: No such file or directory

参考Build.yml，安装node-14.17.3和最新版本都试过，本地编译，提示无法找到打开包括文件“string.h"和无法打开包括文件”ctype.h"

用LIN 下载时，知乎上面有一个整体的 jason文件，请问这个 jason 文件到哪里下载

I was flashing and found that there is no 36 service, can I add 36 service, and then update the software, thank you

安装好node-gyp后，用msvs2015或msvs2017，npm install提示在此解决方案中一次生成一个项目。若要启用并行生成，请添加“/m”开关。多个错误，无法将函数定义与现有的声明匹配。



该如何解决，非常感谢。

A JavaScript error occurred in the main process

Uncaught Exception:
Error: ENOENT: no such file or directory, open

when I configure the TA as 0x55 and SA as 0x35, then click "ADD" button, it appears mistake on Send ID (0X18db5535) and Receive ID (0X18db3535). they actually will be 0x18DA5535 and 0x18DA3555 using PCAN-View monitoring, which is correct CAN ID.

It is recommended to update to dynamic adjustment of CANFD length. For example, if the length is less than 8 bytes, a canfd message of length 8 is sent. for ECUBUS.