This module manages the ferm firewalling software. It allows you to configure the actual software, but also all related rules.
You maybe wonder what happend to release 1.1.0 and 1.0.0. We had to take them down because they contained sensitive information.
This is very easy:
include ferm
This will install the package, but nothing more. It won't explicitly enable it or write any rules. Be careful here: The default Debian package enabled autostart for the service and only allows incoming SSH/IPSec connections.
It is also possible to install ferm from sources:
class {'ferm':
install_method = 'vcsrepo',
}
When install_method
is vcsrepo
, the git
binary is required, this module should handle Git installation.
When install_method
is vcsrepo
with vcstag
>= v2.5
ferm call "legacy" xtables tools because nft based tools are incompatible.
You can easily define rules in Puppet (they don't need to be exported resources):
@@ferm::rule{"allow_kafka_server2server-${trusted['certname']}":
chain => 'INPUT',
policy => 'ACCEPT',
proto => 'tcp',
dport => '(9092 9093)',
saddr => "(${facts['networking']['ip6']}/128 ${facts['networking']['ip']}/32)",
tag => 'allow_kafka_server2server',
}
You can collect them like this:
# collect all exported resources with the tag allow_vault_server2server
Ferm::Rule <<| tag == 'allow_kafka_server2server' |>>
You can also define rules in Hiera. Make sure to use alias()
as interpolation
function, because hiera()
will always return a string.
---
subnet01: '123.123.123.0/24'
subnet02: '123.123.124.0/24'
subnet03:
- '123.123.125.0/24'
- '123.123.126.0/24'
subnets:
- "%{alias('subnet01')}"
- "%{alias('subnet02')}"
- "%{alias('subnet03')}"
- 123.123.127.0/24
ferm::rules:
'allow_http_https':
chain: 'INPUT'
policy: 'ACCEPT'
proto: 'tcp'
dport: '(80 443)'
saddr: "%{alias('subnets')}"
ferm::rules is a hash. configured for deep merge. Hiera will collect all defined hashes and hand them over to the class. The main class will create rules for all of them. It also collects all exported resources that are tagged with the FQDN of a box.
It's also possible to match against ipsets. This allows to easily match against a huge amount of IP addresses or network ranges. You can use this as follows:
ferm::ipset { 'INPUT':
sets => {
'office' => 'ACCPET',
'internet' => 'DROP',
}
}
please see the references section for more examples.
General best practices for firewalling recommend that you use explicit whitelisting.
Usually this boils down to configuring your firewall in a stateful manner, i.e. allowing ESTABLISHED
and RELATED
connections in addition to some whitelisted ports (i.e. TCP/22 for SSHD, likely limited to certain source addresses).
For this to work you need connection tracking, provided by the nf_conntrack
kernel module and configurable via the iptables conntrack
module.
However, especially in virtualization environments, you do not want to track every connection being routed through the hypervisor.
You only want to track connections directly addressed to the hypervisor itself, i.e. traffic ending up in the filter/INPUT
chain, but not traffic that is later going through filter/FORWARD
to guest systems.
Unfortunately the ferm
tool does not allow negating lists (i.e. @ipfilter()
) and thus we cannot easily negate saddr
or daddr
params, which forces us to configure two rules instead of one.
Connection tracking can only be controlled in the PREROUTING
chain of the raw
table.
ferm::rules:
'allow_conntrack_local':
chain: 'PREROUTING'
table: 'raw'
proto: 'all'
daddr:
- "%{facts.ipaddress}"
- "%{facts.ipaddress6}"
action: 'RETURN'
'disable_conntrack_nonlocal':
chain: 'PREROUTING'
table: 'raw'
proto: 'all'
action: 'NOTRACK'
interface: "%{facts.networking.primary}"
The upper RETURN
rule will stop evaluating further rules in the PREROUTING
chain of the raw
table if the traffic is addressed directly to the current node applying the catalogue.
The second rule will disable connection tracking for all other traffic coming in over the primary network interface, that is not addressed directly to the current node, i.e. guest systems hosted on it.
This will prevent your conntrack table from overflowing, tracking only the relevant connections and allowing you to use a stateful ruleset.
All parameters are documented within the classes. We generate markdown documentation. It's available in the REFERENCE.md. It also contains many examples.
This project contains tests for rspec-puppet.
Quickstart to run all linter and unit tests:
bundle install --path .vendor/ --without system_tests --without development --without release
bundle exec rake test
For more details about the development workflow and on how to contribute, please check the CONTRIBUTING.md.
puppet-ferm is maintained by Vox Pupuli, it was written by Tim 'bastelfreak' Meusel.