fotisl / ir2i2c Goto Github PK

Hi, I have a use case for this library - IRRemote.h doesn't work on NRF52 chips.

But I am having trouble understanding what the code in the master loop should look like. I guessed it maybe would look something like this but it's not working. I know my Tiny chip and IR setup is correct but the data across is just a stream of 0's.

void loop() {
  Wire.beginTransmission(0x10);
  Wire.write(byte(0x01));
  Wire.endTransmission();
  delay(10);
  Wire.requestFrom(0x10, 1);
  
  delay(1);
  
  while (Wire.available()) { // slave may send less than requested
    uint8_t d = Wire.read(); // receive a byte as character
    Serial.println(d);
  }
}

Could you provide an example?

Just for comment, to get this code work with ATtiny85 and with 8MHz get rambo TinyWire with rollback branch
https://github.com/rambo/TinyWire/tree/rollback

And for IRremote get specially modifyed version for ATtiny85 8MHz
https://gist.github.com/SeeJayDee/caa9b5cc29246df44e45b8e7d1b1cdc5

And it should work