SparkX STC31 Breakout (Qwiic) (SPX-18385)
An Arduino library for the STC3x family of CO2 sensors from Sensirion. The STC31 uses Sensirion’s patented CMOSens® sensor technology to measure CO2 concentrations up to 100%.
We've written this Arduino library to make reading the CO2 concentration very easy. It can be downloaded through the Arduino Library manager: search for 'SparkFun STC3x'.
Library written by Paul Clark, based on the SCD30 library by Nathan Seidle (SparkFun).
- /examples - Example sketches for the library (.ino). Run these from the Arduino IDE.
- /src - Source files for the library (.cpp, .h).
- keywords.txt - Keywords from this library that will be highlighted in the Arduino IDE.
- library.properties - General library properties for the Arduino package manager.
- Installing an Arduino Library Guide - Basic information on how to install an Arduino library.
- SEN-18632 - SparkFun MicroMod Environmental Function Board with SGP40, STC31, and SHTC3
- SPX-18385 - SparkX Breakout with STC31 and SHTC3
This product is open source!
Please use, reuse, and modify these files as you see fit. Please maintain attribution to SparkFun Electronics and release anything derivative under the same license.
Distributed as-is; no warranty is given.
- Your friends at SparkFun.