Connect via Serial
picocom --baud 115200 /dev/cu.usbserial-DN02N1D8
Download and upload a file
ampy --port /dev/cu.usbserial-DN02N1D8 get boot.py
ampy --port /dev/cu.usbserial-DN02N1D8 put boot.py
ampy --port /dev/cu.usbserial-DN02N1D8 ls
- Break light when negative acceleration is detected
- Turn indicator when curves are detected
- Remote control for special effects
- Auto Shut-off when the board is picked up
- Start a webserver using picoweb. See picoweb#46