The Dom amongst the Flipper Zero Firmware. Give your Flipper the power and freedom it is really craving. Let it show you its true form. Dont delay, switch to the one and only true Master today!
Home Page: https://flipper-xtre.me
License: GNU General Public License v3.0
Clara why am I having issues finding the update file once ive transfered the extracted firmware folder to the flipper. I search in browser then update and then this firmware but I can't seem to find the corresponding update file once there. any suggestions?
It is most likely user error on my part but any suggestions would be appreciated. Thanks
No response
Love the new feature long press 2 lock.
I suggest to move the long press 2 lock, from the left to the right button.
To quickly reboot the Flipper you press left+back. But the new LP2L function causes the Flipper to reboot locked when you have a PIN enabled.
When you reboot the Flipper with a PIN from the power menu, it reboots unlocked.
Lock without a PIN always reboots unlocked, even when it displays LOCKED just before reboot.
All was tested on a factory reset Flipper including formatted SD with XFW v37
Besides this really minor lock thingy, i'm love the new v37 with instant app start.
Hey awesome release but can i disable these NSFW icons or swap them? I cant show this to people at work, come on man
No response
So, trying emulating any key which uses Nice One 72bit protocol crashes Flipper. I can provide two files (basically two buttons of one gate remote) if necessary. I'm not sure if this is bug appeared here in XFW or has origin in Official Firmware.
Sub-Ghz
No response
No response
IR sensor is very rarely working, I’ve tried in so many times and has only worked twice
IR
No response
No response
Similar to how Unleashed does it, a way to change which module the flipper uses for sub ghz.
https://github.com/quen0n/flipperzero-ext-cc1101
Further down the line being able to use both the internal and an external one at the same time would be useful, but with the flippers limitations I'm not sure how easy/inuitive way to do this.
If you are going to take Code from other people, why dont you give credits? The gpio and ir replication is from my firmware.
No response
Hi there Clara, Can please tell me how to fix this error during update RPC error in command 'system.update': ERROR_INVALID_PARAMETERS
It just wont update. I tried updating with unleashed and flipper is back working again. Please help if your free.
Cheers Kev
Is there anyway to have sfw mode change the passport as well? It's not really important just something id like if I was gonna use this FW daily. Thanks!<3
No response
Hey Clara,
I was playing around with some RFID Reader.
I try multiple times the RFID Fuzzer App but it won't run correctly.
It crashes the Firmware and pass out the flipper without letting me safe anything.
After starting RFID-Fuzzer with "Load File" or "Load UIDs from File" the Flipper chrashed with the Info "BusFault"
No response
No response
No response
When attempting to update to V38_01112023 using the MD5 (XFW-0038_01112023.tgz) = 407d4333bf36f125afbe2c0e5a23403c file the upgrade process errors out and states Cannot find update directory
DATA CORRUPTED message
update on SD card as wellNo response
900226 [DEV] Full Update @Lubrin START
900226 [RPC] (2) Gui Start VirtualDisplay START
900226 [UTL] Region Provisioning @Lubrin START
900227 [DBG] Development hardware region detected, skipping region provisioning...
900227 [UTL] Region Provisioning @Lubrin SUCCESS
900227 [UTL] Refresh Storage Info @Lubrin START
900312 [RPC] (2) Gui Start VirtualDisplay SUCCESS
900312 [RPC] (3) Storage Info @/ext START
900367 [RPC] (3) Storage Info @/ext SUCCESS
900367 [RPC] (4) Storage Stat @/ext/Manifest START
900423 [RPC] (4) Storage Stat @/ext/Manifest SUCCESS
900467 [UTL] Refresh Storage Info @Lubrin SUCCESS
900471 [ZIP] Uncompressing file with size of 2872494 bytes...
900512 [ZIP] Uncompression finished : No Error
900513 [DBG] No parent node found for Storage//Coding//Flipper_Zero//Firmware//XFW-0038_01112023.
900513 [DBG] No parent node found for Storage//Coding//Flipper_Zero//Firmware//XFW-0038_01112023/firmware.dfu.
900513 [DBG] No parent node found for Storage//Coding//Flipper_Zero//Firmware//XFW-0038_01112023/radio.bin.
900513 [DBG] No parent node found for Storage//Coding//Flipper_Zero//Firmware//XFW-0038_01112023/resources.tar.
900513 [DBG] No parent node found for Storage//Coding//Flipper_Zero//Firmware//XFW-0038_01112023/splash.bin.
900513 [DBG] No parent node found for Storage//Coding//Flipper_Zero//Firmware//XFW-0038_01112023/update.fuf.
900513 [DBG] No parent node found for Storage//Coding//Flipper_Zero//Firmware//XFW-0038_01112023/updater.bin.
900514 [DEV] Full Update @Lubrin ERROR: Cannot find update directory
900514 [BKD] Current operation finished with error: "Cannot find update directory"
1.2.2Evangelion_Exp.txt kicks you back to Music Player.
Evangelion_Exp.txt
No response
No response
When I try going into Applications/Tools/ Weather Station and try running the application it brings up an Error saying "Load failed Found unsatisfied imports. I tried flashing the firmware again, and still the Error comes up. I could easily be doing something wrong since I'm a noob to this, but I tried all I could think of. Thank you for your time, and I hope it is an easy fix.
No response
No response
No response
I could just be stupid but for certain applications it says API version mismatch. Please help 😭
open apps with question mark icon (for example: dice_app)
No response
No response
No response
Hello. New to the Flipper scene. Just got mine a couple of days ago & it has been quite the experience! Have been enjoying tinkering around with it & learning more about it hands on.
I have a slight issue & hoping someone can point me in the right direction.
I have the latest release Xtreme Firmware installed & am curious to know if there is a way to remove "Thank You" splash animation & how would i go about it?
It seems to want to override the stock flipper animation at times. Sometimes a reboot shows the stock flipper animations for a while, then goes back to the "Thank You" animation.
Any info would be appreciated! 
It would be cool if there is a card identifier/analyser app like the card cloners have. You start it present the card and the app cycles trough the different frequencies and reports when the card has been read. Also it would be cool if after it can drop you in the corresponding app (125kHz or NFC)
No response
Flipper Zero instantly turns off prior to setting up a PIN.
1- Press UP
2- Select Set PIN + Off (make sure you don't have a pin setup previously)
3- a pin setup screen will show and then the FZ will instantly turn off
No response
No response
This is a purely fresh setup environment.
whenever im useing the bluetooth romote it keeps freezeing so i gotta reset my flipper
connected help the button on mouse and it freezes after a short time
No response
No response
No response
$ git clone --recursive https://github.com/ClaraCrazy/Flipper-Xtreme.git
$ cd Flipper-Xtreme/
To flash directly to the Flipper (Needs to be connected via USB, qFlipper closed)
$ ./fbt flash_usb
To just compile firmware
$ ./fbt updater_package
If building FAPS:
$ ./fbt fap_dist
If building image assets:
$ ./fbt resources icons dolphin_ext
I would be great to include in your FW a feature which is present in RM-FW..
When you hold Power button for 2-3s it ask if I want to shut down device.
Right click to confirm.
Nice feature, much easier then strolling through Settings menu to turn it off.
(I wrote the same under Pen Ace YT video).
Nethertheless, great FW Clara!
Another possible feature request - to remove that one unreadable animation.. Others are very nice. And not b/c of the anime girls, but due to its clarity and fluidity (if I can say so.. English is not my native language).
No response
i love this firmware. but... i think it needs some more apps there are many, there is one in dexv that's called ir remote and it helps me a TON and in rougemaster there are alot of apps that i use alot! i was thinking that you could maby just copy and paste in the diff apps from rougemaster also i think that you could add a IR remote dump file or something from
here is one of the ir dumps u could add
Flipper-IRDB-main.zip
Just wondering if you might have changed the leveling system or something as I was getting a couple hundred points a day now the most I can get is around 80 points a day? Just wondering if this was purposeful or some type of bug.
Level up
No response
No response
No response
467.989 and 468.009 ghz always on when using frequency analyzer in house... it was never detected before update V41_02142023.
unlshd V.30 have made this update:
SubGHz: Remove 467.75 From freq analyzer since it has too much noise (Frequency is still can be used, just excluded from FA to avoid false detections
just go in frequency analyzer lol
Frequency analyzer
No response
No response
I like what you are doing with this fork, esp. the tidying up of code form various upstream repos. However, not interested in the animations & non-standard gfx. SFW options doesn't replace all graphics. An option to build with just stock images/animations would be welcomed.
No response
I made a subghz remote for my lights and added jam freq 433.92 the jam does work but it gets stuck and requires a restart.
No response
Logs do not show anything but the reboot.
here is the text to make a remote to recreate this.
Filetype: Flipper SubGhz RAW File
Version: 1
UP:
DOWN:
LEFT:
RIGHT:
OK: /any/subghz/Jamming/Jam_433.92.sub
ULABEL:
DLABEL:
LLABEL:
RLABEL:
OKLABEL: JAM
Hello there, Sorry to hassle you. I have updated my flipper fw to your Xtreme from unleashed. For some reason I cannot find the jamming files? Can you please guide me to the location in the flipper.
Cheers and thanks for all your work . Happy New Year from Scotland. Kev
Searched Subghz saved folder and application tools,misc
No response
No response
No response
When in the screen saver mode, you can push up to get lock options. The "Lock with pin + off" does not work. Tried multiple times & ways still doesn't work.
I've been playing around with nrf24 for a bit, and there are just a lot more wireless mice that don't accept the keyboard commands, but can still be moved remotely using jackit and a crazyradio PA dongle as seen here (https://github.com/insecurityofthings/jackit). Would be nice to just make the mouse move randomly and erratically, but using the dir pad would be awesome.
No response
When I lock my flipper and I try to unlock it, the standard picture to press back back back is not showing.
However it shows a warning sign.
UpUnlock picture
No response
No response
Hello Dev. Team,
i really like your Xtrem firmware, you are doing a great job.
Since the last update, i can't read NFC-A tags for TonieBox anymore.
Also, I can't emulate my saved ones anymore.
Are you currently working on it or do I have to look for another solution.
Read Specific Card Type NFC-A as Toniebox not showing anymore.
Toniebox
No response
No response
Upon unlocking a new level the new animations unlocked no longer are set as the wallpaper. It usually keeps the same animation or sets one of the older animations.
Level up
No response
No response
No response
Yo. Feel free to pull from my repo. I'm new to this and doing the same thing.
https://github.com/IamUSER/Flipper-Fusion
Best wishes!
When I try to connect to the flipper's Bad KB access point, it connected once, then never again. I used an android phone to connect to it.
Go to BadKB tab
Select payload
Go on phone, to bluetooth devices
Device shows up, error message "Couldn't connect"
BadKB - Android
With Unleashed, the Flipper does a dictionary attack, which takes a few minutes. Especially with later builds of Unleashed, this is almost always successful, and it will be able to save and emulate the key. With Xtreme, it reads it very quickly. However, emulating it always fails.
.
No response
No response
No response
Read EMV-Card : display "reading card don't move " and nothing happens
Can be read with standard reader as NFC-B immediatly
just puut card under flipper
No response
No response
No response
No tgz for release V38_01112023 is provided.
Thus no update with the mobile app possible.
go to GitHub releases tab
No response
No response
No response
subghz bruteforce doesnt work on linear garage door openers frequncy 318 . please can you add this in an update?
No response
Update and Recover Mode DFU started text overlapes the custom firmware text.
No response
No response
No response
Hi,
Updated the latest FW available (XFW 040), when you go browse the SD and create a file .txt under subplaylist/CAME/433 in order to craete a new playlist , the file itself appear correctly inside the folder but then when you try tu use it from application it doesn't show up
inside the new file created the path for the files is like this:
sub: /ext/subghz/Garages/CAME-12bit-433/8/000_000.sub
i do something wrong ? anyone else get the same issue ?
thanks
create new file on the SD under /subplaylist/*.txt , it will not show up when you start the application SubGhz Playlist from main menu
No response
No response
No response
whenever you save a button on a remote the frames in between the naming button and remote menus has text thats overlapping and different sizes
infrared - learn new remote - a menu thing - save - loading screen thing with weird text - remote
No response
No response
No response
No response
Since Github already put a content warning(!) on this repo, I think it'd be a good idea to put it on a Gitea/Forgejo mirror in case Github takes it down
theres no main folder in apps anymore after updating.
Not sure if possible, but it would be nice if the SFW toggle would also update the SD Card Unmounted screen to show Flipper's original graphic.
I love your Flipper build so much, thank you for all the hardwork!
Hello, Clara) I know, that it is not easy to implement, but is there any chance, that this feature will come to Flippers?
Thanks for this truly awesome firmware and have a wonderful day/night)
Can not install from qflipper phone app "unable to install something went wrong"
Can not install tgz (corrupted) with qflipper desktop windows 10
Once installed using dfu file in windows qflipper clock does not work.
Qflipper for windows 64bit shows dev: unknown
Clock will not load. "Error preload failed API version mismatch
Windows 10 machine newest qflipper 64bit
No response
1205 [APP] qFlipper version 1.2.2 commit ba67025d 2022-12-08T07:31:11
1205 [APP] OS info: Windows 10 Version 2009 10 10.0.19045 Qt 5.15.2
1568 [UPD] Fetched update information from https://update.flipperzero.one/qFlipper/directory.json
1568 [UPD] Fetched update information from https://update.flipperzero.one/firmware/directory.json
23204 [REG] Detected new device: VID_0x483:PID_0x5740
23417 [DBG] Trying serial port FLIP_L0MB4T at \\.\COM3
23417 [DBG] Using serial port FLIP_L0MB4T at \\.\COM3
23417 [RPC] Starting RPC session...
23624 [RPC] RPC session started successfully.
23625 [RPC] (1) System Protobuf Version START
23682 [DBG] Detected protobuf version: 0.14
23682 [RPC] (1) System Protobuf Version SUCCESS
23691 [RPC] (2) Property Get START
23808 [RPC] (2) Property Get SUCCESS
23816 [RPC] (3) Storage Info @/ext START
23874 [RPC] (3) Storage Info @/ext SUCCESS
23882 [RPC] (4) Storage Stat @/ext/Manifest START
23941 [RPC] (4) Storage Stat @/ext/Manifest SUCCESS
23941 [RPC] (5) System Get DateTime START
24001 [DBG] Flipper time skew is -2045 milliseconds
24002 [RPC] (5) System Get DateTime SUCCESS
24008 [RPC] (6) System Set DateTime START
24067 [RPC] (6) System Set DateTime SUCCESS
24083 [RPC] Stopping RPC session...
24097 [RPC] Attempting to unload protobuf plugin...
24097 [RPC] Unloaded protobuf plugin.
24097 [RPC] RPC session stopped successfully.
24098 [REG] Registering the device
24098 [DEV] Version: 0.73.2 commit: 20a0a43d2 radio: 1.13.3
24098 [BKD] Current device changed to "L0mb4t"
24198 [RPC] Starting RPC session...
24274 [RPC] RPC session started successfully.
24283 [RPC] (1) Gui Start ScreenStream START
24341 [RPC] (1) Gui Start ScreenStream SUCCESS
355652 [DEV] Full Update @L0mb4t START
355661 [RPC] (2) Gui Start VirtualDisplay START
355667 [UTL] Region Provisioning @L0mb4t START
355667 [DBG] Development hardware region detected, skipping region provisioning...
355668 [UTL] Region Provisioning @L0mb4t SUCCESS
355685 [UTL] Refresh Storage Info @L0mb4t START
355734 [RPC] (2) Gui Start VirtualDisplay SUCCESS
355743 [RPC] (3) Storage Info @/ext START
355801 [RPC] (3) Storage Info @/ext SUCCESS
355812 [RPC] (4) Storage Stat @/ext/Manifest START
355867 [RPC] (4) Storage Stat @/ext/Manifest SUCCESS
355928 [UTL] Refresh Storage Info @L0mb4t SUCCESS
355934 [ZIP] Uncompressing file with size of 2257072 bytes...
355993 [ZIP] Uncompression finished : No Error
356010 [DEV] Full Update @L0mb4t ERROR: Cannot find update directory
356010 [BKD] Current operation finished with error: "Cannot find update directory"
366484 [BKD] Finalized current operation
366485 [SCR] Screen streaming is already running
366492 [RPC] (5) Gui Stop VirtualDisplay START
366551 [RPC] (5) Gui Stop VirtualDisplay SUCCESS
366559 [RPC] (6) Storage Info @/ext START
366631 [RPC] (6) Storage Info @/ext SUCCESS
424383 [DEV] Full Update @L0mb4t START
424391 [RPC] (7) Gui Start VirtualDisplay START
424399 [UTL] Region Provisioning @L0mb4t START
424408 [DBG] Development hardware region detected, skipping region provisioning...
424416 [UTL] Region Provisioning @L0mb4t SUCCESS
424433 [UTL] Refresh Storage Info @L0mb4t START
424449 [RPC] (7) Gui Start VirtualDisplay SUCCESS
424458 [RPC] (8) Storage Info @/ext START
424516 [RPC] (8) Storage Info @/ext SUCCESS
424524 [RPC] (9) Storage Stat @/ext/Manifest START
424583 [RPC] (9) Storage Stat @/ext/Manifest SUCCESS
424659 [UTL] Refresh Storage Info @L0mb4t SUCCESS
424666 [ZIP] Uncompressing file with size of 2257072 bytes...
424732 [ZIP] Uncompression finished : No Error
424750 [DEV] Full Update @L0mb4t ERROR: Cannot find update directory
424750 [BKD] Current operation finished with error: "Cannot find update directory"
427032 [BKD] Finalized current operation
427032 [SCR] Screen streaming is already running
427041 [RPC] (10) Gui Stop VirtualDisplay START
427099 [RPC] (10) Gui Stop VirtualDisplay SUCCESS
427107 [RPC] (11) Storage Info @/ext START
427176 [RPC] (11) Storage Info @/ext SUCCESS
587007 [DEV] Backup Internal storage @L0mb4t START
587015 [RPC] (12) Gui Start VirtualDisplay START
587021 [UTL] Backup /int @L0mb4t START
587071 [RPC] (12) Gui Start VirtualDisplay SUCCESS
587079 [RPC] (13) Storage List @/int START
587155 [RPC] (13) Storage List @/int SUCCESS
587165 [RPC] (14) Storage Read @/int/.bt.keys START
587247 [RPC] (14) Storage Read @/int/.bt.keys SUCCESS
587254 [RPC] (15) Storage Read @/int/.bt.settings START
587322 [RPC] (15) Storage Read @/int/.bt.settings SUCCESS
587329 [RPC] (16) Storage Read @/int/.desktop.settings START
587397 [RPC] (16) Storage Read @/int/.desktop.settings SUCCESS
587404 [RPC] (17) Storage Read @/int/.dolphin.state START
587480 [RPC] (17) Storage Read @/int/.dolphin.state SUCCESS
587488 [RPC] (18) Storage Read @/int/.notification.settings START
587555 [RPC] (18) Storage Read @/int/.notification.settings SUCCESS
587562 [RPC] (19) Storage Read @/int/.power.settings START
587639 [RPC] (19) Storage Read @/int/.power.settings SUCCESS
587646 [RPC] (20) Storage Read @/int/.region_data START
587714 [RPC] (20) Storage Read @/int/.region_data SUCCESS
587739 [ZIP] Compressing file with size of 9216 bytes...
587756 [ZIP] Compression finished: No Error
587759 [UTL] Backup /int @L0mb4t SUCCESS
589015 [DEV] Backup Internal storage @L0mb4t SUCCESS
589016 [RPC] (21) Gui ScreenFrame START
589017 [RPC] (21) Gui ScreenFrame SUCCESS
592262 [BKD] Finalized current operation
592262 [SCR] Screen streaming is already running
592271 [RPC] (22) Gui Stop VirtualDisplay START
592329 [RPC] (22) Gui Stop VirtualDisplay SUCCESS
592338 [RPC] (23) Storage Info @/ext START
592403 [RPC] (23) Storage Info @/ext SUCCESS
595163 [RPC] (24) Storage Info @/ext START
595234 [RPC] (24) Storage Info @/ext SUCCESS
595242 [RPC] (25) Gui Stop ScreenStream START
595306 [RPC] (25) Gui Stop ScreenStream SUCCESS
599379 [RPC] (26) Storage List @/ext START
599550 [RPC] (26) Storage List @/ext SUCCESS
600313 [UPD] Fetched update information from https://update.flipperzero.one/qFlipper/directory.json
600338 [UPD] Fetched update information from https://update.flipperzero.one/firmware/directory.json
608699 [RPC] (27) Storage List @/ext START
608867 [RPC] (27) Storage List @/ext SUCCESS
615129 [RPC] (28) Storage List @/ext/update START
615222 [RPC] (28) Storage List @/ext/update SUCCESS
626096 [RPC] (29) Gui Start ScreenStream START
626156 [RPC] (29) Gui Start ScreenStream SUCCESS
730178 [DEV] Full Update @L0mb4t START
730185 [RPC] (30) Gui Start VirtualDisplay START
730193 [UTL] Region Provisioning @L0mb4t START
730202 [DBG] Development hardware region detected, skipping region provisioning...
730210 [UTL] Region Provisioning @L0mb4t SUCCESS
730226 [UTL] Refresh Storage Info @L0mb4t START
730244 [RPC] (30) Gui Start VirtualDisplay SUCCESS
730251 [RPC] (31) Storage Info @/ext START
730305 [RPC] (31) Storage Info @/ext SUCCESS
730305 [RPC] (32) Storage Stat @/ext/Manifest START
730361 [RPC] (32) Storage Stat @/ext/Manifest SUCCESS
730438 [UTL] Refresh Storage Info @L0mb4t SUCCESS
730454 [ZIP] Uncompressing file with size of 2257072 bytes...
730518 [ZIP] Uncompression finished : No Error
730536 [DEV] Full Update @L0mb4t ERROR: Cannot find update directory
730537 [BKD] Current operation finished with error: "Cannot find update directory"
752267 [RPC] Serial connection was lost.
752277 [RPC] Stopping RPC session...
752277 [RPC] Attempting to unload protobuf plugin...
752277 [RPC] Unloaded protobuf plugin.
752277 [RPC] RPC session stopped successfully.
752309 [REG] Device disconnected: VID_0x483:PID_0x5740
752310 [BKD] Last device was disconnected
767263 [REG] Detected new device: VID_0x483:PID_0x5740
767291 [DBG] Trying serial port FLIP_L0MB4T at \\.\COM3
767291 [DBG] Using serial port FLIP_L0MB4T at \\.\COM3
767292 [RPC] Starting RPC session...
767415 [RPC] RPC session started successfully.
767415 [RPC] (1) System Protobuf Version START
767475 [DBG] Detected protobuf version: 0.14
767475 [RPC] (1) System Protobuf Version SUCCESS
767475 [RPC] (2) Property Get START
767593 [RPC] (2) Property Get SUCCESS
767594 [RPC] (3) Storage Info @/ext START
767651 [RPC] (3) Storage Info @/ext SUCCESS
767651 [RPC] (4) Storage Stat @/ext/Manifest START
767714 [RPC] (4) Storage Stat @/ext/Manifest SUCCESS
767718 [RPC] (5) System Get DateTime START
767775 [DBG] Flipper time skew is -1819 milliseconds
767775 [RPC] (5) System Get DateTime SUCCESS
767784 [RPC] (6) System Set DateTime START
767839 [RPC] (6) System Set DateTime SUCCESS
767839 [RPC] Stopping RPC session...
767854 [RPC] Attempting to unload protobuf plugin...
767854 [RPC] Unloaded protobuf plugin.
767854 [RPC] RPC session stopped successfully.
767855 [REG] Registering the device
767855 [DEV] Version: 0.73.2 commit: 20a0a43d2 radio: 1.13.3
767855 [BKD] Current device changed to "L0mb4t"
767997 [RPC] Starting RPC session...
768087 [RPC] RPC session started successfully.
768087 [RPC] (1) Gui Start ScreenStream START
768145 [RPC] (1) Gui Start ScreenStream SUCCESS
780343 [DEV] Full Update @L0mb4t START
780343 [RPC] (2) Gui Start VirtualDisplay START
780344 [UTL] Region Provisioning @L0mb4t START
780344 [DBG] Development hardware region detected, skipping region provisioning...
780344 [UTL] Region Provisioning @L0mb4t SUCCESS
780344 [UTL] Refresh Storage Info @L0mb4t START
780400 [RPC] (2) Gui Start VirtualDisplay SUCCESS
780409 [RPC] (3) Storage Info @/ext START
780471 [RPC] (3) Storage Info @/ext SUCCESS
780471 [RPC] (4) Storage Stat @/ext/Manifest START
780527 [RPC] (4) Storage Stat @/ext/Manifest SUCCESS
780584 [UTL] Refresh Storage Info @L0mb4t SUCCESS
780610 [ZIP] Uncompressing file with size of 2257072 bytes...
780675 [ZIP] Uncompression finished : No Error
780693 [DEV] Full Update @L0mb4t ERROR: Cannot find update directory
780693 [BKD] Current operation finished with error: "Cannot find update directory"
799351 [BKD] Finalized current operation
799351 [SCR] Screen streaming is already running
799352 [RPC] (5) Gui Stop VirtualDisplay START
799408 [RPC] (5) Gui Stop VirtualDisplay SUCCESS
799408 [RPC] (6) Storage Info @/ext START
799481 [RPC] (6) Storage Info @/ext SUCCESS
807302 [DEV] Full Update @L0mb4t START
807302 [RPC] (7) Gui Start VirtualDisplay START
807303 [UTL] Region Provisioning @L0mb4t START
807303 [DBG] Development hardware region detected, skipping region provisioning...
807303 [UTL] Region Provisioning @L0mb4t SUCCESS
807303 [UTL] Refresh Storage Info @L0mb4t START
807358 [RPC] (7) Gui Start VirtualDisplay SUCCESS
807359 [RPC] (8) Storage Info @/ext START
807429 [RPC] (8) Storage Info @/ext SUCCESS
807433 [RPC] (9) Storage Stat @/ext/Manifest START
807492 [RPC] (9) Storage Stat @/ext/Manifest SUCCESS
807569 [UTL] Refresh Storage Info @L0mb4t SUCCESS
807591 [ZIP] Uncompressing file with size of 2257072 bytes...
807642 [ZIP] Uncompression finished : No Error
807650 [DEV] Full Update @L0mb4t ERROR: Cannot find update directory
807651 [BKD] Current operation finished with error: "Cannot find update directory"
811258 [BKD] Finalized current operation
811259 [SCR] Screen streaming is already running
811267 [RPC] (10) Gui Stop VirtualDisplay START
811325 [RPC] (10) Gui Stop VirtualDisplay SUCCESS
811333 [RPC] (11) Storage Info @/ext START
811404 [RPC] (11) Storage Info @/ext SUCCESS
865483 [DEV] Full Update @L0mb4t START
865491 [RPC] (12) Gui Start VirtualDisplay START
865499 [UTL] Region Provisioning @L0mb4t START
865507 [DBG] Development hardware region detected, skipping region provisioning...
865516 [UTL] Region Provisioning @L0mb4t SUCCESS
865532 [UTL] Refresh Storage Info @L0mb4t START
865557 [RPC] (12) Gui Start VirtualDisplay SUCCESS
865565 [RPC] (13) Storage Info @/ext START
865623 [RPC] (13) Storage Info @/ext SUCCESS
865623 [RPC] (14) Storage Stat @/ext/Manifest START
865682 [RPC] (14) Storage Stat @/ext/Manifest SUCCESS
865733 [UTL] Refresh Storage Info @L0mb4t SUCCESS
865759 [ZIP] Uncompressing file with size of 2257072 bytes...
865832 [ZIP] Uncompression finished : No Error
865850 [DEV] Full Update @L0mb4t ERROR: Cannot find update directory
865850 [BKD] Current operation finished with error: "Cannot find update directory"
878158 [BKD] Finalized current operation
878158 [SCR] Screen streaming is already running
878159 [RPC] (15) Gui Stop VirtualDisplay START
878215 [RPC] (15) Gui Stop VirtualDisplay SUCCESS
878224 [RPC] (16) Storage Info @/ext START
878296 [RPC] (16) Storage Info @/ext SUCCESS
898441 [DEV] Firmware install from file @L0mb4t START
898448 [RPC] (17) Gui Start VirtualDisplay START
898457 [UTL] Backup /int @L0mb4t START
898507 [RPC] (17) Gui Start VirtualDisplay SUCCESS
898507 [RPC] (18) Storage List @/int START
898599 [RPC] (18) Storage List @/int SUCCESS
898600 [RPC] (19) Storage Read @/int/.bt.keys START
898691 [RPC] (19) Storage Read @/int/.bt.keys SUCCESS
898691 [RPC] (20) Storage Read @/int/.bt.settings START
898758 [RPC] (20) Storage Read @/int/.bt.settings SUCCESS
898765 [RPC] (21) Storage Read @/int/.desktop.settings START
898833 [RPC] (21) Storage Read @/int/.desktop.settings SUCCESS
898840 [RPC] (22) Storage Read @/int/.dolphin.state START
898916 [RPC] (22) Storage Read @/int/.dolphin.state SUCCESS
898923 [RPC] (23) Storage Read @/int/.notification.settings START
898991 [RPC] (23) Storage Read @/int/.notification.settings SUCCESS
898991 [RPC] (24) Storage Read @/int/.power.settings START
899066 [RPC] (24) Storage Read @/int/.power.settings SUCCESS
899066 [RPC] (25) Storage Read @/int/.region_data START
899132 [RPC] (25) Storage Read @/int/.region_data SUCCESS
899150 [ZIP] Compressing file with size of 9216 bytes...
899158 [ZIP] Compression finished: No Error
899158 [UTL] Backup /int @L0mb4t SUCCESS
899165 [UTL] Start Recovery Mode @L0mb4t START
899165 [RPC] (26) System Reboot START
899166 [RPC] (26) System Reboot SUCCESS
899223 [RPC] Serial connection was lost.
899231 [RPC] Stopping RPC session...
899231 [RPC] Attempting to unload protobuf plugin...
899231 [RPC] Unloaded protobuf plugin.
899231 [RPC] RPC session stopped successfully.
899280 [REG] Device went offline: VID_0x483:PID_0x5740
904437 [REG] Detected new device: VID_0x483:PID_0xdf11
904490 [DBG] Device reported transfer size: 1024
904493 [DBG] Bytes uploaded: 32 100%
904493 [DBG] Upload has finished.
904495 [REG] Device went back online
904548 [UTL] Start Recovery Mode @L0mb4t SUCCESS
904549 [RCY] Firmware Download @L0mb4t START
908640 [DBG] Device is not idle, resetting...
908708 [DBG] Erasing memory: 0%
908832 [DBG] Erasing memory: 1%
908958 [DBG] Erasing memory: 2%
909090 [DBG] Erasing memory: 3%
909223 [DBG] Erasing memory: 4%
909340 [DBG] Erasing memory: 5%
909395 [DBG] Erasing memory: 6%
909515 [DBG] Erasing memory: 7%
909648 [DBG] Erasing memory: 8%
909765 [DBG] Erasing memory: 9%
909899 [DBG] Erasing memory: 10%
910024 [DBG] Erasing memory: 11%
910090 [DBG] Erasing memory: 12%
910215 [DBG] Erasing memory: 13%
910340 [DBG] Erasing memory: 14%
910465 [DBG] Erasing memory: 15%
910590 [DBG] Erasing memory: 16%
910648 [DBG] Erasing memory: 17%
910773 [DBG] Erasing memory: 18%
910891 [DBG] Erasing memory: 19%
911014 [DBG] Erasing memory: 20%
911148 [DBG] Erasing memory: 21%
911265 [DBG] Erasing memory: 22%
911324 [DBG] Erasing memory: 23%
911441 [DBG] Erasing memory: 24%
911565 [DBG] Erasing memory: 25%
911690 [DBG] Erasing memory: 26%
911808 [DBG] Erasing memory: 27%
911873 [DBG] Erasing memory: 28%
912008 [DBG] Erasing memory: 29%
912124 [DBG] Erasing memory: 30%
912248 [DBG] Erasing memory: 31%
912381 [DBG] Erasing memory: 32%
912515 [DBG] Erasing memory: 33%
912573 [DBG] Erasing memory: 34%
912708 [DBG] Erasing memory: 35%
912832 [DBG] Erasing memory: 36%
912965 [DBG] Erasing memory: 37%
913089 [DBG] Erasing memory: 38%
913157 [DBG] Erasing memory: 39%
913282 [DBG] Erasing memory: 40%
913406 [DBG] Erasing memory: 41%
913532 [DBG] Erasing memory: 42%
913657 [DBG] Erasing memory: 43%
913790 [DBG] Erasing memory: 44%
913857 [DBG] Erasing memory: 45%
913982 [DBG] Erasing memory: 46%
914115 [DBG] Erasing memory: 47%
914241 [DBG] Erasing memory: 48%
914365 [DBG] Erasing memory: 49%
914431 [DBG] Erasing memory: 50%
914557 [DBG] Erasing memory: 51%
914690 [DBG] Erasing memory: 52%
914815 [DBG] Erasing memory: 53%
914940 [DBG] Erasing memory: 54%
915074 [DBG] Erasing memory: 55%
915140 [DBG] Erasing memory: 56%
915273 [DBG] Erasing memory: 57%
915386 [DBG] Erasing memory: 58%
915495 [DBG] Erasing memory: 59%
915615 [DBG] Erasing memory: 60%
915674 [DBG] Erasing memory: 61%
915782 [DBG] Erasing memory: 62%
915907 [DBG] Erasing memory: 63%
916041 [DBG] Erasing memory: 64%
916174 [DBG] Erasing memory: 65%
916282 [DBG] Erasing memory: 66%
916340 [DBG] Erasing memory: 67%
916473 [DBG] Erasing memory: 68%
916591 [DBG] Erasing memory: 69%
916707 [DBG] Erasing memory: 70%
916828 [DBG] Erasing memory: 71%
916882 [DBG] Erasing memory: 72%
916998 [DBG] Erasing memory: 73%
917125 [DBG] Erasing memory: 74%
917256 [DBG] Erasing memory: 75%
917382 [DBG] Erasing memory: 76%
917490 [DBG] Erasing memory: 77%
917557 [DBG] Erasing memory: 78%
917691 [DBG] Erasing memory: 79%
917814 [DBG] Erasing memory: 80%
917932 [DBG] Erasing memory: 81%
918040 [DBG] Erasing memory: 82%
918094 [DBG] Erasing memory: 83%
918206 [DBG] Erasing memory: 84%
918324 [DBG] Erasing memory: 85%
918457 [DBG] Erasing memory: 86%
918582 [DBG] Erasing memory: 87%
918706 [DBG] Erasing memory: 88%
918765 [DBG] Erasing memory: 89%
918900 [DBG] Erasing memory: 90%
919023 [DBG] Erasing memory: 91%
919150 [DBG] Erasing memory: 92%
919282 [DBG] Erasing memory: 93%
919348 [DBG] Erasing memory: 94%
919466 [DBG] Erasing memory: 95%
919598 [DBG] Erasing memory: 96%
919715 [DBG] Erasing memory: 97%
919841 [DBG] Erasing memory: 98%
919965 [DBG] Erasing memory: 99%
919965 [DBG] Erase done.
919965 [DBG] Device is not idle, resetting...
920008 [DBG] Device reported transfer size: 1024
920057 [DBG] Bytes downloaded: 1024 0%
920424 [DBG] Bytes downloaded: 8192 1%
920781 [DBG] Bytes downloaded: 15360 2%
921148 [DBG] Bytes downloaded: 22528 3%
921566 [DBG] Bytes downloaded: 30720 4%
921915 [DBG] Bytes downloaded: 37888 5%
922273 [DBG] Bytes downloaded: 45056 6%
922657 [DBG] Bytes downloaded: 52224 7%
923081 [DBG] Bytes downloaded: 60416 8%
923440 [DBG] Bytes downloaded: 67584 9%
923806 [DBG] Bytes downloaded: 74752 10%
924223 [DBG] Bytes downloaded: 82944 11%
924582 [DBG] Bytes downloaded: 90112 12%
924965 [DBG] Bytes downloaded: 97280 13%
925331 [DBG] Bytes downloaded: 104448 14%
925740 [DBG] Bytes downloaded: 112640 15%
926123 [DBG] Bytes downloaded: 119808 16%
926491 [DBG] Bytes downloaded: 126976 17%
926848 [DBG] Bytes downloaded: 134144 18%
927265 [DBG] Bytes downloaded: 142336 19%
927622 [DBG] Bytes downloaded: 149504 20%
927998 [DBG] Bytes downloaded: 156672 21%
928440 [DBG] Bytes downloaded: 164864 22%
928798 [DBG] Bytes downloaded: 172032 23%
929176 [DBG] Bytes downloaded: 179200 24%
929548 [DBG] Bytes downloaded: 186368 25%
929957 [DBG] Bytes downloaded: 194560 26%
930323 [DBG] Bytes downloaded: 201728 27%
930698 [DBG] Bytes downloaded: 208896 28%
931124 [DBG] Bytes downloaded: 217088 29%
931484 [DBG] Bytes downloaded: 224256 30%
931831 [DBG] Bytes downloaded: 231424 31%
932207 [DBG] Bytes downloaded: 238592 32%
932623 [DBG] Bytes downloaded: 246784 33%
932982 [DBG] Bytes downloaded: 253952 34%
933340 [DBG] Bytes downloaded: 261120 35%
933706 [DBG] Bytes downloaded: 268288 36%
934140 [DBG] Bytes downloaded: 276480 37%
934497 [DBG] Bytes downloaded: 283648 38%
934849 [DBG] Bytes downloaded: 290816 39%
935256 [DBG] Bytes downloaded: 299008 40%
935622 [DBG] Bytes downloaded: 306176 41%
935982 [DBG] Bytes downloaded: 313344 42%
936339 [DBG] Bytes downloaded: 320512 43%
936757 [DBG] Bytes downloaded: 328704 44%
937109 [DBG] Bytes downloaded: 335872 45%
937481 [DBG] Bytes downloaded: 343040 46%
937832 [DBG] Bytes downloaded: 350208 47%
938240 [DBG] Bytes downloaded: 358400 48%
938598 [DBG] Bytes downloaded: 365568 49%
938956 [DBG] Bytes downloaded: 372736 50%
939373 [DBG] Bytes downloaded: 380928 51%
939722 [DBG] Bytes downloaded: 388096 52%
940081 [DBG] Bytes downloaded: 395264 53%
940439 [DBG] Bytes downloaded: 402432 54%
940839 [DBG] Bytes downloaded: 410624 55%
941198 [DBG] Bytes downloaded: 417792 56%
941581 [DBG] Bytes downloaded: 424960 57%
941972 [DBG] Bytes downloaded: 433152 58%
942331 [DBG] Bytes downloaded: 440320 59%
942707 [DBG] Bytes downloaded: 447488 60%
943064 [DBG] Bytes downloaded: 454656 61%
943489 [DBG] Bytes downloaded: 462848 62%
943848 [DBG] Bytes downloaded: 470016 63%
944231 [DBG] Bytes downloaded: 477184 64%
944589 [DBG] Bytes downloaded: 484352 65%
944981 [DBG] Bytes downloaded: 492544 66%
945340 [DBG] Bytes downloaded: 499712 67%
945707 [DBG] Bytes downloaded: 506880 68%
946123 [DBG] Bytes downloaded: 515072 69%
946489 [DBG] Bytes downloaded: 522240 70%
946856 [DBG] Bytes downloaded: 529408 71%
947215 [DBG] Bytes downloaded: 536576 72%
947640 [DBG] Bytes downloaded: 544768 73%
948011 [DBG] Bytes downloaded: 551936 74%
948364 [DBG] Bytes downloaded: 559104 75%
948723 [DBG] Bytes downloaded: 566272 76%
949131 [DBG] Bytes downloaded: 574464 77%
949514 [DBG] Bytes downloaded: 581632 78%
949858 [DBG] Bytes downloaded: 588800 79%
950267 [DBG] Bytes downloaded: 596992 80%
950623 [DBG] Bytes downloaded: 604160 81%
950990 [DBG] Bytes downloaded: 611328 82%
951348 [DBG] Bytes downloaded: 618496 83%
951751 [DBG] Bytes downloaded: 626688 84%
952106 [DBG] Bytes downloaded: 633856 85%
952457 [DBG] Bytes downloaded: 641024 86%
952864 [DBG] Bytes downloaded: 649216 87%
953214 [DBG] Bytes downloaded: 656384 88%
953573 [DBG] Bytes downloaded: 663552 89%
953931 [DBG] Bytes downloaded: 670720 90%
954356 [DBG] Bytes downloaded: 678912 91%
954714 [DBG] Bytes downloaded: 686080 92%
955064 [DBG] Bytes downloaded: 693248 93%
955439 [DBG] Bytes downloaded: 700416 94%
955848 [DBG] Bytes downloaded: 708608 95%
956214 [DBG] Bytes downloaded: 715776 96%
956598 [DBG] Bytes downloaded: 722944 97%
957014 [DBG] Bytes downloaded: 731136 98%
957372 [DBG] Bytes downloaded: 738304 99%
957731 [DBG] Bytes downloaded: 745068 100%
957731 [DBG] Download has finished.
957747 [RCY] Firmware Download @L0mb4t SUCCESS
957764 [RCY] Exit Recovery Mode @L0mb4t START
957774 [DBG] Device is not idle, resetting...
957818 [DBG] vvv ATTENTION: Ignore errors below until matching closing message. vvv
957820 [DBG] ^^^ ATTENTION: Ignore errors above until matching opening message. ^^^
957820 [DBG] vvv ATTENTION: Ignore errors below until matching closing message. vvv
957820 [DBG] ^^^ ATTENTION: Ignore errors above until matching opening message. ^^^
957854 [REG] Device went offline: VID_0x483:PID_0xdf11
958632 [REG] Detected new device: VID_0x483:PID_0x5740
958634 [DBG] Trying serial port FLIP_L0MB4T at \\.\COM3
958634 [DBG] Using serial port FLIP_L0MB4T at \\.\COM3
958634 [RPC] Starting RPC session...
958763 [RPC] RPC session started successfully.
958763 [RPC] (1) System Protobuf Version START
959156 [DBG] Detected protobuf version: 0.14
959156 [RPC] (1) System Protobuf Version SUCCESS
959164 [RPC] (2) Property Get START
959339 [RPC] (2) Property Get SUCCESS
959339 [RPC] (3) Storage Info @/ext START
959396 [RPC] (3) Storage Info @/ext SUCCESS
959396 [RPC] (4) Storage Stat @/ext/Manifest START
959464 [RPC] (4) Storage Stat @/ext/Manifest SUCCESS
959468 [RPC] (5) System Get DateTime START
959531 [DBG] Flipper time skew is -1575 milliseconds
959531 [RPC] (5) System Get DateTime SUCCESS
959531 [RPC] (6) System Set DateTime START
959589 [RPC] (6) System Set DateTime SUCCESS
959589 [RPC] Stopping RPC session...
959604 [RPC] Attempting to unload protobuf plugin...
959604 [RPC] Unloaded protobuf plugin.
959604 [RPC] RPC session stopped successfully.
959604 [REG] Device went back online
959605 [DEV] Version: 0.74.2 commit: Unknown radio: 1.13.3
959725 [RPC] Starting RPC session...
959823 [RPC] RPC session started successfully.
959824 [RCY] Exit Recovery Mode @L0mb4t SUCCESS
959824 [RPC] (27) Gui Start VirtualDisplay START
959850 [UTL] Restore /int @L0mb4t START
959851 [ZIP] Uncompressing file with size of 723 bytes...
959854 [ZIP] Uncompression finished : No Error
959897 [RPC] (27) Gui Start VirtualDisplay SUCCESS
959897 [RPC] (28) Storage Remove @/int START
959975 [RPC] (28) Storage Remove @/int SUCCESS
959980 [RPC] (29) Storage Remove @/int/.bt.keys START
960047 [RPC] (29) Storage Remove @/int/.bt.keys SUCCESS
960047 [RPC] (30) Storage Remove @/int/.bt.settings START
960113 [RPC] (30) Storage Remove @/int/.bt.settings SUCCESS
960113 [RPC] (31) Storage Remove @/int/.desktop.settings START
960197 [RPC] (31) Storage Remove @/int/.desktop.settings SUCCESS
960197 [RPC] (32) Storage Remove @/int/.dolphin.state START
960255 [RPC] (32) Storage Remove @/int/.dolphin.state SUCCESS
960263 [RPC] (33) Storage Remove @/int/.notification.settings START
960322 [RPC] (33) Storage Remove @/int/.notification.settings SUCCESS
960330 [RPC] (34) Storage Remove @/int/.power.settings START
960392 [RPC] (34) Storage Remove @/int/.power.settings SUCCESS
960392 [RPC] (35) Storage Remove @/int/.region_data START
960456 [RPC] (35) Storage Remove @/int/.region_data SUCCESS
960465 [RPC] (36) Storage MkDir @/int START
960526 [RPC] (36) Storage MkDir @/int SUCCESS
960530 [RPC] (37) Storage Write @/int/.bt.keys START
960650 [RPC] (37) Storage Write @/int/.bt.keys SUCCESS
960653 [RPC] (38) Storage Write @/int/.bt.settings START
960713 [RPC] (38) Storage Write @/int/.bt.settings SUCCESS
960722 [RPC] (39) Storage Write @/int/.desktop.settings START
960806 [RPC] (39) Storage Write @/int/.desktop.settings SUCCESS
960814 [RPC] (40) Storage Write @/int/.dolphin.state START
960897 [RPC] (40) Storage Write @/int/.dolphin.state SUCCESS
960898 [RPC] (41) Storage Write @/int/.notification.settings START
960980 [RPC] (41) Storage Write @/int/.notification.settings SUCCESS
960989 [RPC] (42) Storage Write @/int/.power.settings START
961047 [RPC] (42) Storage Write @/int/.power.settings SUCCESS
961055 [RPC] (43) Storage Write @/int/.region_data START
961139 [RPC] (43) Storage Write @/int/.region_data SUCCESS
961139 [UTL] Restore /int @L0mb4t SUCCESS
961143 [UTL] Restart device @L0mb4t START
961143 [RPC] (44) System Reboot START
961143 [RPC] (44) System Reboot SUCCESS
961205 [RPC] Serial connection was lost.
961213 [RPC] Stopping RPC session...
961213 [RPC] Attempting to unload protobuf plugin...
961213 [RPC] Unloaded protobuf plugin.
961213 [RPC] RPC session stopped successfully.
991138 [UTL] Restart device @L0mb4t ERROR: Failed to restart: timeout exceeded
991138 [DEV] Firmware install from file @L0mb4t ERROR: Failed to restart: timeout exceeded
991138 [BKD] Current operation finished with error: "Failed to restart: timeout exceeded"
1013688 [REG] Device disconnected: VID_0x483:PID_0x5740
1013688 [BKD] Last device was disconnected
1018820 [REG] Detected new device: VID_0x483:PID_0x5740
1018824 [DBG] Trying serial port FLIP_L0MB4T at \\.\COM3
1018824 [DBG] Using serial port FLIP_L0MB4T at \\.\COM3
1018824 [RPC] Starting RPC session...
1018898 [RPC] RPC session started successfully.
1018899 [RPC] (1) System Protobuf Version START
1018963 [DBG] Detected protobuf version: 0.14
1018963 [RPC] (1) System Protobuf Version SUCCESS
1018963 [RPC] (2) Property Get START
1019171 [RPC] (2) Property Get SUCCESS
1019178 [RPC] (3) Storage Info @/ext START
1019238 [RPC] (3) Storage Info @/ext SUCCESS
1019238 [RPC] (4) Storage Stat @/ext/Manifest START
1019312 [RPC] (4) Storage Stat @/ext/Manifest SUCCESS
1019321 [RPC] (5) System Get DateTime START
1019379 [DBG] Flipper time skew is -2423 milliseconds
1019379 [RPC] (5) System Get DateTime SUCCESS
1019379 [RPC] (6) System Set DateTime START
1019443 [RPC] (6) System Set DateTime SUCCESS
1019447 [RPC] Stopping RPC session...
1019462 [RPC] Attempting to unload protobuf plugin...
1019462 [RPC] Unloaded protobuf plugin.
1019462 [RPC] RPC session stopped successfully.
1019462 [REG] Registering the device
1019462 [DEV] Version: 0.74.2 commit: Unknown radio: 1.13.3
1019462 [BKD] Current device changed to "L0mb4t"
1019568 [RPC] Starting RPC session...
1019656 [RPC] RPC session started successfully.
1019657 [RPC] (1) Gui Start ScreenStream START
1019720 [RPC] (1) Gui Start ScreenStream SUCCESS
1140536 [DEV] Full Update @L0mb4t START
1140543 [RPC] (2) Gui Start VirtualDisplay START
1140552 [UTL] Region Provisioning @L0mb4t START
1140560 [DBG] Development hardware region detected, skipping region provisioning...
1140568 [UTL] Region Provisioning @L0mb4t SUCCESS
1140585 [UTL] Refresh Storage Info @L0mb4t START
1140601 [RPC] (2) Gui Start VirtualDisplay SUCCESS
1140610 [RPC] (3) Storage Info @/ext START
1140668 [RPC] (3) Storage Info @/ext SUCCESS
1140668 [RPC] (4) Storage Stat @/ext/Manifest START
1140727 [RPC] (4) Storage Stat @/ext/Manifest SUCCESS
1140786 [UTL] Refresh Storage Info @L0mb4t SUCCESS
1140814 [ZIP] Uncompressing file with size of 2257072 bytes...
1140868 [ZIP] Uncompression finished : No Error
1140887 [DEV] Full Update @L0mb4t ERROR: Cannot find update directory
1140887 [BKD] Current operation finished with error: "Cannot find update directory"
No response
when you go to passport then back to the main menu and then to the file explorer thing it takes awhile to load
main menu - passport - main menu - file explorer
No response
No response
No response
Hey Clara,
I was playing around with some RFID Reader.
I try multiple times the RFID Fuzzer App but it won't run correctly.
It crashes the Firmware and pass out the flipper without letting me safe anything.
Open Tanks game coop (s) and flipper bricks. Forced to hold Return and Down button for 20+ seconds to get flipper to reboot with error "Flipper Crashed but has been rebooted - NULL Pointer dereference"
Applications
Games
Tanks
Coop S
CRASH
TANKS GAME
No response
No response
Whenever i try to build from source using ./fbt updater_package, it throws:
********** FBT ERRORS ********** build/f7-firmware-C/toolbox/version.inc.h: Error 1
Compile Error
No response
No response
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
Django
The Web framework for perfectionists with deadlines.
Laravel
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
Microsoft
Open source projects and samples from Microsoft.
Google
Google ❤️ Open Source for everyone.
Alibaba
Alibaba Open Source for everyone
D3
Data-Driven Documents codes.
Tencent
China tencent open source team.