This is a selection of the parts used to design Music Thing modules

• Download using the Download ZIP button on the right -->
• Copy to your eagle Libraries folder
• Check back for upgrades regularly

• EURO POWER HEADER in three variants
  • Regular
  • Fat - with larger pads for easier soldering
  • Fat Lock - with pads deliberately offset by 10mil to hold the part in place while soldering
• THONKICONN footprint for Thonkiconn 3.5mm sockets
• RESISTOR in three variants
  • Vertical
  • 7mm - a tight, neat grid. Slightly harder to put the resistors in, but finished boards are more compact
  • 10mm a looser grid, slightly scruffy looking boards
• SMALL_DIODE for signal diodes like 1N4148
• VACTROL_4PIN for VTL5C3 and similar vactrols, will also fit the Silonex NSL-32SR3
• VACTROL_5PIN for VTL5C3/2 and similar five pin vactrols
• YAMAICHI_SD_CARD for YAMAICHI PJS008U-3000-0 vertical SD card from Radio Music
• 9MM_SNAP-IN_POT for Alpha vertical pots and similar
• 9MM_SNAP-IN_POT_CHASSIS for Alpha pots, contains a pin for the metal chassis for grounding
• BOURNS_3362P for PCB trimmer used in Radio Music
• D6_PUSH_SWITCH push button Buchla 200e - style switch used in Radio Music (improved footprint with larger pin holes)
• DAC0800 Digital Audio Converter chip used in Turing Machine, DIL and SMD versions
• TL072, TL074 standard dual and quad op amps, DIL and SMD versions
• Mini SPDT small right angle spdt switch like Apem MHSS1105
• ALPHA Illuminated faders in 30 and 20mm