This repository runs through the steps used to reconstruct branches from TLS scans.

Outlined below are the steps required used in an upcoming paper.

Some of the steps are very specific to scanning with a RIEGL TLS; however, these can be modified and tips to do so are included.

Between 1 - 6 branches (dependent on branch size) were arranged in a group, orientated so that they would not touch each other or the ground, and scanned simultaneously. Branches were secured in the end of metal tubing and placed in buckets of sand to minimise movement. qrDAR fiducial markers (akin to QR codes) were placed on the floor to allow identification of each branch in post-processing. The markers include a pattern of 4 retroreflective stickers (10 mm diameter) which were used to co-register scans.

Between 4 - 6 scan positions (collectively known as a project), located around the branches, were used to capture each set of branches. At each position a single scan was performed with an angular resolution of 0.02(^\circ)

Branch scanning was done indoors to minimise the impact of wind which branch tips are very sensitive too.

This section is quite specific to using a RIEGL scanner and the RiSCAN PRO software. At the end we require individual scans to be registered into a single point cloud with (at a minimum) [X Y Z scan_pos reflectance] fields.

Before importing scans into a project we want to identify the reflective dots on the qrDAR markers as coarse registration tie-points. This will require the installation of qrDAR. We will also need to convert our .rxp files to another format (ideally .ply). One options is to use PDAL¹, see ./pdal for a pipeline. Other options include using PCL.

If using PDAL, a loop² can be used to convert all scans in a project to .ply

mkdir ply
cd ply
for rxp in $(ls ../ScanPos*/??????_??????.rxp); 
    do pdal pipeline pdal/rxp2ply.json --readers.rxp.filename $rxp --writers.ply.filename ${rxp%.*}.ply; 
done

Once scans are converted to .ply run

python python/find_dots.py <riproject_dir>

This will generate a ./stickers directory containg text files with sticker locations

This step requires RiSCAN Pro (tested on version 2.9) and is therefore run on a Windows machine. First you will need to create a blank project (blank.RiSCAN), this is used a basis to insert your data into.

Once you have creeated a blank project run

python python\create_riscan.py --riproject C:\path\to\XXXX-XX-XX.XXX.riproject 
                               --blank C:\path\to\blank.RiSCAN

Now open the created project and register as normal. Tie points will have been populated so no need to search for these (although sometimes not always found) and scans has already been rotated to the correct orienation.

To make subsequent processing easier, select approximately the points that will be required for further processing i.e. a polygon that includes all branches, codes and some of the floor.

Once registered, export scans as individual scans in .ascii format with the fields PID, X, Y, Z, Deviation, Reflectance and Selected fields to the /ascii directory (this will have been made when creating .RiSCAN project). Also export the SOP rotation matrix in .dat format to the /matrix directory.

This step is necessary as it (1) removes all points that were not selected (see previous step) and (2) populates a scan position field. To combine scans run

python python/combine_scans.py /path/to/XXXX-XX-XX.XXX.riproject

Once you have generated a single point cloud for a set of branches the next step is to extract individual branches. A mapping of qrDAR code to branch name is needed, this is provided in a .csv as

Then run the python script

  -p PC, --pc PC        path to point cloud
  -t TRANSLATION, --translation TRANSLATION
                        path to .csv with tag translation, this should have the form "name, project, code" where name is the branch name, project is the name of the file and code is the qrDAR number
  -o ODIR, --odir ODIR  output directory for branches
  --bucket-height BUCKET_HEIGHT
                        height of the bucket
  --bucket-radius BUCKET_RADIUS
                        radius of the bucket
  --verbose             print something


python python/extract_branches.py -p ascii/<project-point-clod.ply \
                                  -t branch_translation.txt 
                                  -o /put/branches/here 

Filtering of noisy points and poitns where the footprint centroid does not interect the branch are removed.

  -p PC, --pc PC        path to point cloud
  -o ODIR, --odir ODIR  output directory for branches
  --suffix SUFFIX       file name suffix
  
  
python python/filter_branch.py -p XXX-T123.ply 
                               -o .
                               --suffix filtered

There are a number of options for fitting a QSM

1. treegraph was used for this paper
2. TreeQSM is another popular option
3. And their are many others....

1. Create a conda environment using conda create -n pdal-install -c conda-forge gdal ninja cmake cxx-compiler laszip

2. Download the rivlib-2_5_10-x86_64-linux-gcc9.zip from the memebers area of the RIEGL website (make sure to get the gcc9 version). Unzip and add an environmental variable to point at the directory export RiVLib_DIR=/path/to/rivlib-2_5_10-x86_64-linux-gcc9

3. Follow the PDAL Unix Compilation notes. Before running cmake edit line 63 of cmake/options.cmake to "Choose if RiVLib support should be built" True)

² assumes you have pdal and the Jupyter directory in your path