extrawest / charge-point-simulator-via-ocpp-2.0.1 Goto Github PK

docker run
--sysctl net.ipv4.ip_local_port_range="1024 65535"
-e SPRING_PROFILES_ACTIVE=dev
-p 8000:8000
ghcr.io/extrawest/charge-point-simulator-via-ocpp-2.0.1:master
--csUrl "ws://localhost:9014/v4/hpr/socket/websocket?id=bertoxious" --stationCount 64511

tried running it through this docker command

2024-02-28 07:35:46 2024-02-28 02:05:46.262 INFO 1 --- [ main] .c.c.s.i.ChargePointEmulatorsServiceImpl : 64511 charge points emulators were created

this is the the last log and also service is not availaible on port 8000

Also getting this exception in the docker logs

com.extrawest.ocpp.emulator.chargepoint.cli.exception.IllegalStateApplicationException: There is no heartbeating scheduled future in this storage. Consider storing it first.

Firstly, I'd like to express my gratitude for this repository. It has been working exceptionally well, especially on the chargers' side. I've successfully tested and confirmed that my central system can retrieve information from the chargers.

However, I've encountered an issue when trying to send commands from the central system to control the behavior of the chargers. It appears that the chargers are not responding as expected.

Expected Behavior:
I expected the chargers to [describe the expected behavior, e.g., "request start charging", "request stop charging", etc.] upon receiving the command from the central system.

Actual Behavior:
The chargers do not seem to respond.

Question:
Is this functionality (sending commands from the central system to control the chargers) supported in this repository? If so, could you provide some guidance or point me in the right direction to resolve this issue?

Thank you in advance for your assistance and for the excellent work on this repo!