ASIO driver, Usb Driver, FX2LP Firmware, VHDL Fpga, Schematics & PCB Layout for the AudioXtreamer, a USB 2.0 32ch Audio/Midi interface for retrofitting into digital mixers/interfaces.
Hi, I am interested in building this but I have noticed a few issues with the PCB. Firstly the resistor networks, RNx appear to be mounted underneath the level shifter IC's, is this correct as I would have thought it would be better to mount them on the reverse of the board and use vias?
Also I have noticed that there don't seem to be any values for some of the passive components (RNx Lx) would you be able to add those to the schematic?
Looks like a great project and I look forward to getting it working with my 01X
I have been trying to compile the TortugASIO driver but it fails as it looks like it may rely on a modified asiosdk? It seems to be trying to use Unicode Windows calls in parts of asiosdk that doesn't support Unicode?
I get lots of this kind of error within the asiosdk register.cpp:
DWORD GetModuleFileNameW(HMODULE,LPWSTR,DWORD)': cannot convert argument 2 from 'char [360]' to 'LPWSTR'
Hello Eltortugo,
I wanted to use your audioxtreamer board to record 16 MEMS-I2S-microphones at the same time.
After flashing the bitstream to the fpga and uploading the default firmware to the fifo, i used the local debugger in Visual Studio 2019 (Windows 10) and recognized, that the method "CypressDevice::Open" ran into an endless loop (no changes in the code).
Now I want to ask, if you used a differend firmware for the cypress chip or if you can imagine what the problem could be.
Best regards.