A breakout board for one of the cheap NRF24L01 modules for Raspbery Pi.

##Module pin outs Top view of the NRF24L01 modules pins are assumed to be:

8 Pin

|GND  |3v3  |
|CE   |CSN  |
|SCK  |MOSI |
|MISO |IRQ (not connected)|

10 Pin

|3v3  |3v3  |
|CE   |CSN  |
|SCK  |MOSI |
|MISO |IRQ (not connected)|
|GND  |GND  |

Please check that your modules match one of these pin layouts otherwise you risk damaging your raspberry pi or the NRF24L01 module.

Top	Bottom

##Schematic

Select the resistor values for the LED's. The raspberry pi can only source up to 16mA through the GPIO pins. Suggested bill of matterials includes:

http://uk.farnell.com/ part numbers:

2.54mm female headers are also required for the board. A single 2x13 16 position header for the raspberry pi and a 2x4 8 position or 2x5 10 position female header for the NRF24L01 module.