e3donline / reprapfirmware-sd Goto Github PK

Hi,
I use one hemera und 2 Titan aero on my TC.

The new pull request sets the default steps per millimeter to over 800 steps/mm.

I also use the 16x interpolation and have only 409 my hemera und 427 on my aero's. So there is something wrong

@well-engineered

Hi,

according to duet documentation the M915 command doesnt support R4700. It should be zero

;Stall Detection
M915 C S5 F0 H200 R4700					; Coupler

;Stall Detection
M915 X Y S5 F0 H400 R4700				; X / Y Axes

For the README.md, it may be a good idea to note how to enable the PT100 sensors for tools in the config.g file
Ex: M305 S"T0" P1 X200; Set thermistor

Hi,
it seems that a issue creeped in.

In config.g the max feedrate for C axis is defined as 5000. In the coupler macros it is defined as 50000.

V3 of RepRapFirmware has just been released with a whole load of config changes, so this repository will likely need to be updated.

There are already some settings such as the use of M558 P7 which is deprecated.

Using the Hemera this setting is an order of hundreds too low for good retractions. This is a big trap for newcomers.