Could you tell me how to compile to ESP32? about esp32-evse HOT 4 CLOSED

Using Arduino IDE But it'doesn't work. Think I must use Visual Studio or can which filename (PATH) must to compling in ESP32.

from esp32-evse.

Hi, you need ESP-IDF, in Eclipse with espressive plugin you can import as existing project.
I realise that project needs more documentation... but first I want test it with real EV charing.

from esp32-evse.

thanks for your promptly reply. I hope your self made circuit can successful to EV Chargin, Because Next week I will chek it with my EV car. (I order that your self made circuit with parts )
Another case
I want to know added about 2 question. Could you teach me?
First Question
I need to know that your circuit board is available to using J1772?
Last Question
Your EsayEDA [esp32-devkit-evse] have making [CURRENT SESSING] but I don't know that functions. for what to use that Can you teach me?

Thank you for reading my issue.

https://oshwlab.com/dzurik.miroslav/esp32-devkit-evse

from esp32-evse.

Design is based on https://www.ti.com/lit/ug/tidub87/tidub87.pdf shuld support J1772 but I WARN YOU: NOT TESTED YET!

[CURRENT SENSING] is gpio for CT transformer, used for energy meter.

esp32-devkit-evse is designed only for one phase (ADC1_7 voltage sensing and ADC1_6 current sensing),
You should see in https://github.com/dzurikmiroslav/esp32-evse/blob/master/cfg/esp32devkitc/board.cfg ENERGY_METER_L1_CUR_ADC_CHANNEL and ENERGY_METER_L1_VLT_ADC_CHANNEL values.

Energy meter can be disabled setting ENERGY_METER=none, session consumption will be calculated from max charging current.

from esp32-evse.