How to Compile Project? about esp32-evse HOT 5 OPEN

In Eclipse, it is not enough to just open the project as a Makefile project, it is necessary to use the import an existing IDF project from the idf-eclipse-plugin.

I've been using VSCode with ESP-IDF for a long time now, I found Eclipse quite complicated, and I didn't enjoy reinstalling a configuring idf-eclipse-plugin after every new release ;-)

After checkouting code did you fetch GIT submodules? Please execute: git submodule update --init --recursive

from esp32-evse.

Thanks for your help. I think I managed to compile and install it. I haven't tried it on a car yet. The TL081CP seems to overheat when the circuit is idle, is this a problem?

from esp32-evse.

The operational amplifier should not produce much heat (no more than the ESP32). Do you have a genuine part? I managed to buy a bunch of fake parts on AliExpress :)

from esp32-evse.

Yes I changed it and the problem was solved, thank you.
Now I'm trying it on the car, but it gives a warning waiting for authorization.

I click on the authorization button. but there is no connection

from esp32-evse.

It seems that the detects pilot state B even when no EV is connected... Which is voltage on CP? When has no EV connection (state A) it should be about 12V.

Problem should be caused by:

• wrong config of PILOT_DOWN_THRESHOLD_X
• bad power supply
• voltage drop on the operational amplifier
• wrong voltage divider in the CP circuit

I recommend you read the wiki about callibarion of CP https://github.com/dzurikmiroslav/esp32-evse/wiki/CP-calibration

from esp32-evse.