RFDemo

《路由器就是开发板》 目录

第一篇 准备工作 10

|--1.前言 http://blog.csdn.net/aggresss/article/details/52304513

|--2.路由器选型 http://blog.csdn.net/aggresss/article/details/52332155

|--3.约定 http://blog.csdn.net/aggresss/article/details/52334837

|--4.jtag接口和TTL接线 http://blog.csdn.net/aggresss/article/details/52335714

|--5.Jlink调试路由器 http://blog.csdn.net/aggresss/article/details/52337449

|--6.Wiggler调试路由器 http://blog.csdn.net/aggresss/article/details/52347041

|--7.OpenOCD配置分析 http://blog.csdn.net/aggresss/article/details/52347142

|--8.RT3052F芯片分析 http://blog.csdn.net/aggresss/article/details/52374158

|--9.HG255d硬件分析 http://blog.csdn.net/aggresss/article/details/52431283

|--10.路由器调试之HelloWorld http://blog.csdn.net/aggresss/article/details/52454840

第二篇 U-Boot 分析和改装 10

|--11.U-Boot介绍 http://blog.csdn.net/aggresss/article/details/52573265

|--12.U-Boot工作原理和流程分析 http://blog.csdn.net/aggresss/article/details/52589805

|--13.U-Boot编译原理 http://blog.csdn.net/aggresss/article/details/52614234

|--14.U-Boot命令原理 http://blog.csdn.net/aggresss/article/details/52620822

|--15.MIPS汇编U-Boot从start.S开始 http://blog.csdn.net/aggresss/article/details/52623118

|--16.U-Boot TTL串口输出原理分析 http://blog.csdn.net/aggresss/article/details/52644957

|--17.U-Boot norflash 操作原理分析 http://blog.csdn.net/aggresss/article/details/52694051

|--18.U-Boot 网络原理分析 http://blog.csdn.net/aggresss/article/details/52712415

|--19.基于HG255d_U-Boot的uIP移植 http://blog.csdn.net/aggresss/article/details/52735742

|--20.U-Boot添加web failsafe功能 http://blog.csdn.net/aggresss/article/details/52743365

第三篇 OpenWrt 5

|--21.U-Boot启动OpenWrt实验 http://blog.csdn.net/aggresss/article/details/52752388

|--22.OpenWrt 原理和结构分析 http://blog.csdn.net/aggresss/article/details/52752529

|--23.基于hg255d的OpenWrt固件编译 http://blog.csdn.net/aggresss/article/details/52752554

|--24.OpenWrt ipk helloworld http://blog.csdn.net/aggresss/article/details/52753071

|--25.总结 http://blog.csdn.net/aggresss/article/details/52753089