dralexliu / octoprint-pinozcam Goto Github PK

The Discord link is invalid.

There have been multiple reports on Discord and in the forum of people installing this plugin and it not loading properly because it's missing dependencies. Here's one example.

https://community.octoprint.org/t/pinozcam-plugin-unable-to-show-up/57331

I suspect it's from your conditional setup_requires possibly?

First of thanks for making this! Very excited to try it out. I generally don't love opening issues but I did google as much as I could and can't really find anything about this error. Also python is very much not my wheel house or I would try and dig in further.

Anyway I am trying to install it via the plugin manager and getting the following error on a pi4

`Installing plugin "OctoPrint-PiNozCam" from https://github.com/DrAlexLiu/OctoPrint-PiNozCam/archive/master.zip...
/home/pi/oprint/bin/python3 -m pip --disable-pip-version-check install file:///tmp/tmpt9vqio7l/OctoPrint-PiNozCam-master.zip --no-cache-dir

Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Processing /tmp/tmpt9vqio7l/OctoPrint-PiNozCam-master.zip

ERROR: onnxruntime-1.16.0-cp39-cp39-linux_armv7l.whl is not a supported wheel on this platform.

Error!
Could not parse output from pip, see plugin_pluginmanager_console.log for generated output`

The AI consistently detects the Print Head Grill as an issue. Please see image.

When a failure is detected I get Telegram messages until the print is stopped. Then my phone gets crazy :-).

I would like to request a limit input field for failure messages per print. E. g. setting this to "5" would only send max. 5 messages within one print job.

There should be a option to switch the limit off. Could be reached by "0" as input value.

This line appears to assume bullseye image, but there are also still stretch and bookworm releases out in the wild.

https://github.com/DrAlexLiu/OctoPrint-PiNozCam/blob/1c9519ced05f8e41434b57615cf8a81be97dcff3/setup.py#L40C5-L40C159

ERROR: onnxruntime-1.15.0-cp39-cp39-linux_armv7l.whl is not a supported wheel on this platform.

hey, when installing this plugin I get this error:
ERROR: Could not find a version that satisfies the requirement onnxruntime>=1.15.0 (from octoprint-pinozcam) (from versions: none)
ERROR: No matching distribution found for onnxruntime>=1.15.0

which results in the message: "Installed: Unknown"

I have python 3.10 installed, and from what I can tell, onnx is inly supported up to 3.9

I am using a Samusng Galaxy Note 8 as my device using octo4a

My Camera is mounted "upside-down" but is of course adjustable in Octoprint camera control.

How can this be achieved with PiNozCam and does this matter?

I installed the plugin on my Pi 4 8 Gb running

Linux octopi 6.1.21-v7l+ #1642 SMP Mon Apr  3 17:22:30 BST 2023 armv7l
OctoPrint version : 1.9.3
OctoPi version    : 1.0.0
PiNozCam (1.0.0)

I used the recomended settings for Pi 4 but the system gets to 100% CPU each time the snapshot is taken. This leads to pauses in the print head´s movement. At each pause the suface of the print gets a bulb.

When I disable the plugin the surface of the print is smooth again.

So far, this thing is fantastic. thank you!!!

Would it be possible to add additional notification options other than telegram, even just a generic url/data packet to send to an API?