Uses the unofficial HTTP API and WebSockets for continuous channel updates.

Add one (or more) Homematic IP Access Points to config.json. There are two configuration options that you can set:

{
    "platform": "HomematicIP",
    "name": "HomematicIP",
    "access_point": "<your access point ID>",
    "auth_token": "<your API auth token>"
}

The Access Point ID is printed on the back of your Homematic IP Access Point (HmIP-HAP) and is labeled as "SGTIN", e.g. 3014-xxxx-xxxx-xxxx-xxxx-xxxx.

{
    "platform": "HomematicIP",
    "name": "HomematicIP",
    "access_point": "<your access point ID>",
    "pin": "<your PIN if set in the app>"
}

If you do not have an auth_token or don't know it, leave it empty. Be sure to add the "pin" property if it is set in the app. After startup, watch the logs and wait for "Press blue, glowing link button of HmIP Access Point now!". Then press the button and note the "auth_token" that is being generated, add it to your config.json, remove the pin and restart.

• HmIP-HAP (Access Point)
• HmIP-eTRV (Radiator Thermostat)
• HmIP-eTRV-2 (Radiator Thermostat)
• HmIP-eTRV-B (Radiator Thermostat - basic)
• HmIP-eTRV-C (Heating-thermostat - compact without display)
• HmIP-eTRV-E (Radiator Thermostat - Evo)
• HmIP-FROLL (Shutter Actuator - flush-mount)
• HmIP-BROLL (Shutter Actuator - brand-mount)
• HmIP-FBL (Blind Actuator - flush-mount)
• HmIP-BBL (Blind Actuator - brand-mount)
• HmIP-WTH (Wall Thermostat)
• HmIP-WTH-2 (Wall Thermostat with Humidity Sensor)
• HmIP-BWTH (Brand Wall Thermostat with Humidity Sensor)
• HmIP-WTH-B (Wall Thermostat – basic)
• ALPHA-IP-RBG (Alpha IP Wall Thermostat Display)
• HmIP-STH (Temperature and Humidity Sensor without display - indoor)
• HmIP-STHD (Temperature and Humidity Sensor with display - indoor)
• HmIP-SWDO (Door / Window Contact - optical)
• HmIP-SWDO-I (Door / Window Contact - optical, invisible)
• HmIP-SWDO-PL (Door / Window Contact – optical, plus)
• HmIP-SWDM / HMIP-SWDM-B2 (Door / Window Contact - magnetic)
• HmIP-SCI (Contact Interface Sensor)
• HmIP-SRH (Rotary handle switch)
• HmIP-SWSD (Smoke detector)
• HmIP-PS (Pluggable Switch)
• HmIP-PCBS (Switch Circuit Board - 1 channel)
• HmIP-PCBS-BAT (Printed Circuit Board Switch Battery)
• HmIP-PCBS2 (Switch Circuit Board - 2x channels) (*)
• HmIP-MOD-OC8 ( Open Collector Module ) (*)
• HmIP-WHS2 (Switch Actuator for heating systems – 2x channels) (*)
• HmIP-DRS8 (Homematic IP Wired Switch Actuator – 8x channels) (*)
• HmIP-DRSI4 (Homematic IP Switch Actuator for DIN rail mount – 4x channels) (*)
• HmIP-PSM (Pluggable Switch and Meter)
• HmIP-BSM (Brand Switch and Meter)
• HmIP-FSM, HmIP-FSM16 (Full flush Switch and Meter)
• HmIP-MOD-TM (Garage Door Module Tormatic)
• HmIP-MOD-HO (Garage Door Module for Hörmann)
• HmIP-SWD (Water sensor)
• HmIP-SLO (Light Sensor outdoor)
• HmIP-SMI (Motion Detector with Brightness Sensor - indoor)
• HmIP-SMO-A (Motion Detector with Brightness Sensor - outdoor)
• HmIP-SMI55 (Motion Detector with Brightness Sensor and Remote Control - 2-button)
• HmIP-SPI (Presence Sensor - indoor)
• HmIP-PDT Pluggable Dimmer
• HmIP-BDT Brand Dimmer
• HmIP-FDT Dimming Actuator flush-mount
• HmIPW-DRD3 (Homematic IP Wired Dimming Actuator – 3x channels) (*)

(*) Currently, only first channel is supported.

• Implement more devices
• Implement META-Group (Homematic IP rooms) to HomeKit room-Mapping
• Implement custom characteristics (Actuator) for Radiator Thermostats (e.g. to be used in Eve App)
• Implement custom EVE logging (https://github.com/simont77/fakegato-history)

https://github.com/coreGreenberet/homematicip-rest-api