Long story short, I need to know which boards you will want to be supported by this fork. If anyone has any suggestions, please let me know.

I download ur new code and try to install but i got err.

c:/users/tommy/appdata/local/arduino15/packages/esp32/tools/xtensa-esp32s3-elf-gcc/esp-2021r2-patch5-8.4.0/bin/../lib/gcc/xtensa-esp32s3-elf/8.4.0/../../../../xtensa-esp32s3-elf/bin/ld.exe: C:\Users\tOmmy\AppData\Local\Arduino15\packages\esp32\hardware\esp32\2.0.10/tools/sdk/esp32s3/lib\libnet80211.a(ieee80211_output.o): in function ieee80211_raw_frame_sanity_check': (.text.ieee80211_raw_frame_sanity_check+0x5c): multiple definition of ieee80211_raw_frame_sanity_check'; C:\Users\tOmmy\AppData\Local\Temp\arduino\sketches\1185B356109DB8315BD3A46138052B5C\sketch\deauth.cpp.o:D:\tOmmy\Desktop\minigotch\new ESP32\minigotchi-ESP32/deauth.cpp:36: first defined here
collect2.exe: error: ld returned 1 exit status

Using library Adafruit GFX Library at version 1.11.9 in folder: D:\tOmmy\Documents\Arduino\libraries\Adafruit_GFX_Library
Using library Adafruit BusIO at version 1.16.1 in folder: D:\tOmmy\Documents\Arduino\libraries\Adafruit_BusIO
Using library Wire at version 2.0.0 in folder: C:\Users\tOmmy\AppData\Local\Arduino15\packages\esp32\hardware\esp32\2.0.10\libraries\Wire
Using library SPI at version 2.0.0 in folder: C:\Users\tOmmy\AppData\Local\Arduino15\packages\esp32\hardware\esp32\2.0.10\libraries\SPI
Using library Adafruit SSD1305 at version 2.2.3 in folder: D:\tOmmy\Documents\Arduino\libraries\Adafruit_SSD1305
Using library Adafruit SSD1306 at version 2.5.10 in folder: D:\tOmmy\Documents\Arduino\libraries\Adafruit_SSD1306
Using library TFT_eSPI at version 2.5.43 in folder: D:\tOmmy\Documents\Arduino\libraries\TFT_eSPI
Using library FS at version 2.0.0 in folder: C:\Users\tOmmy\AppData\Local\Arduino15\packages\esp32\hardware\esp32\2.0.10\libraries\FS
Using library SPIFFS at version 2.0.0 in folder: C:\Users\tOmmy\AppData\Local\Arduino15\packages\esp32\hardware\esp32\2.0.10\libraries\SPIFFS
Using library U8g2 at version 2.34.22 in folder: D:\tOmmy\Documents\Arduino\libraries\U8g2
Using library WiFi at version 2.0.0 in folder: C:\Users\tOmmy\AppData\Local\Arduino15\packages\esp32\hardware\esp32\2.0.10\libraries\WiFi
Using library ArduinoJson at version 7.1.0 in folder: D:\tOmmy\Documents\Arduino\libraries\ArduinoJson

At the time of compiling, it gives an error in .bin, warning that the file 'ESP8266WiFi.h' was not found.

I followed the installation step by step for the cardputer, with the minigotchi open in the Arduino IDE, I clicked on 'sketch' and 'export compiled binary'.

I expected a new executable .bin file to be generated. If I did something wrong, can you teach me?"

Let me know if there's anything else you'd like to know!

During compilation, an error occurs: file zmuldefs.h not found.

I followed the installation steps for the cardputer to generate a binary compiled by the IDE.

I expected to create a .bin file.

This is the second step in the installation guide.

When setting Config::advertise = true; in config then minigotchi crashes

platform: Cardputer M5 (ESP32-s3fn8)

Here is the output of the console with the backtrace:
`
(^-^) Hi, I'm Minigotchi, your pwnagotchi's best friend!

('-') You can edit my configuration parameters in config.cpp!

(>-<) Starting now...

################################################

BOOTUP PROCESS

################################################

('-') Adding XYZ to the whitelist
('-') Adding 123 to the whitelist
('-') Adding 456 to the whitelist

(-.-) Initializing on channel 1

(X-X) Channel initialization failed, try again?

((0-o) Scanning for Pwnagotchi.
(o-0) Scanning for Pwnagotchi..
(0-o) Scanning for Pwnagotchi...

(0-o) Scanning for Pwnagotchi.
(o-0) Scanning for Pwnagotchi..
(0-o) Scanning for Pwnagotchi...

(0-o) Scanning for Pwnagotchi.
(o-0) Scanning for Pwnagotchi..
(0-o) Scanning for Pwnagotchi...

(;-;) No Pwnagotchi found

(>-<) Starting advertisment...

Guru Meditation Error: Core 1 panic'ed (LoadProhibited). Exception was unhandled.

Core 1 register dump:
PC : 0x4205a3de PS : 0x00060c30 A0 : 0x8205a558 A1 : 0x3fcebb10
A2 : 0x00000000 A3 : 0x3fcec8d8 A4 : 0x3fcef91c A5 : 0x00000000
A6 : 0x3fcef940 A7 : 0x00000000 A8 : 0x8200739a A9 : 0x3fcebaf0
A10 : 0x00000000 A11 : 0x3fcec3e0 A12 : 0x000004e6 A13 : 0x3fcecdbb
A14 : 0x3fcecdbb A15 : 0x3fcecb6c SAR : 0x0000001d EXCCAUSE: 0x0000001c
EXCVADDR: 0x00000054 LBEG : 0x400556d5 LEND : 0x400556e5 LCOUNT : 0xffffffff

Backtrace: 0x4205a3db:0x3fcebb10 0x4205a555:0x3fcebb50 0x4200a219:0x3fcebb80 0x4200a352:0x3fcebba0 0x4200acb3:0x3fcebc10 0x4200a541:0x3fcebc30 0x420175a4:0x3fcebc50

ELF file SHA256: 9cda293c6cded480
`

After a lot of try and error to identify the error, I think the error is somwhere around the Frame::send() part in void Frame::advertise() at frame.cpp but was unable to identify it better.

C:\Users\itsme\Desktop\minigotchi-ESP32\pwnagotchi.cpp: In static member function 'static void Pwnagotchi::detect()':
C:\Users\itsme\Desktop\minigotchi-ESP32\pwnagotchi.cpp:95:50: error: 'name' was not declared in this scope
Parasite::sendPwnagotchiStatus(FRIEND_FOUND, name.c_str());
^~~~
C:\Users\itsme\Desktop\minigotchi-ESP32\pwnagotchi.cpp:95:50: note: suggested alternative: 'Frame'
Parasite::sendPwnagotchiStatus(FRIEND_FOUND, name.c_str());
^~~~
Frame

exit status 1

Compilation error: 'name' was not declared in this scope

I added std::string name; to the void Pwnagotchi::detect() and it compiles and flashes.

Describe the bug
I Got wifi : unsupport fram type : 0c0
I Got wifi : unsupport fram type : 0a0
and
Screen show Both packets failed to send

Dont know what I did err